commit 7154cbd31c2069726cf730b0ed94e2e79a221602 upstream.
Compiling the recent dma-iommu changes under 32-bit x86 triggers this
compile warning:
drivers/iommu/dma-iommu.c:249:5: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
The reason is that %llx is used to print a variable of type
phys_addr_t. Fix it by using the correct %pa format specifier for
phys_addr_t.
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Fixes: 571f316074a20 ("iommu/dma: Fix IOVA reserve dma ranges")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210607124905.27525-1-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream.
If the device is power-cycled, it takes time for the initiator to transmit
the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to
respond to the primitive to become ACTIVE. Retry the I/O request to allow
the device time to become ACTIVE.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Quat Le <quat.le@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the SET_ROM_WAIT_STATES request which erroneously used
usb_rcvctrlpipe().
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream.
According to the eMMC Spec:
"When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN
field is set to ‘1’) class 11 commands are the only method through
which data transfer tasks can be issued. Existing data transfer
commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when
command queuing is enabled."
which means if CMDQ is enabled, the FFU commands will not be supported.
To fix this issue, just simply disable CMDQ on the ioctl path, and
re-enable CMDQ once ioctl request is completed.
Tested-by: Michael Brunner <Michael.Brunner@kontron.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 1e8e55b670 (mmc: block: Add CQE support)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9c9762d4d44dcb1b2ba90cfb4122dc11ceebf31 upstream.
After commit 07173c3ec2 ("block: enable multipage bvecs"), a bvec can
have multiple pages. But bio_will_gap() still assumes one page bvec while
checking for merging. If the pages in the bvec go across the
seg_boundary_mask, this check for merging can potentially succeed if only
the 1st page is tested, and can fail if all the pages are tested.
Later, when SCSI builds the SG list the same check for merging is done in
__blk_segment_map_sg_merge() with all the pages in the bvec tested. This
time the check may fail if the pages in bvec go across the
seg_boundary_mask (but tested okay in bio_will_gap() earlier, so those
BIOs were merged). If this check fails, we end up with a broken SG list
for drivers assuming the SG list not having offsets in intermediate pages.
This results in incorrect pages written to the disk.
Fix this by returning the multi-page bvec when testing gaps for merging.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1623094445-22332-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c435c166dcf526ac827bc964d82cc0d5e7a1fd0b ]
Zhihao sent a patch but it made llvm__compile_bpf() return what
asprintf() returns on error, which is just -1, but since this function
returns -errno, fix it by returning -ENOMEM for this case instead.
Fixes: cb76371441 ("perf llvm: Allow passing options to llc ...")
Fixes: 5eab5a7ee0 ("perf llvm: Display eBPF compiling command ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210609115945.2193194-1-chengzhihao1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f36ef407628835a7d7fb3d235b1f1aac7022d9a3 ]
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE
architecture which is used to context-switch processor state (among other
things). In addition, AMD has recently joined the protection keys club by
adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init
state", which actually applied to Intel's implementation but was just
harder to hit. This series adds a test which is expected to help find
this class of bug both on AMD and Intel. All the work around pkeys on x86
also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second
resolution. So, each time alloc_random_pkey() is called, the PRNG is
*RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>);
foo = rand();
bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if
you do:
srand(1);
foo = rand();
srand(1);
bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent
"fix" effectively forced the test case to use the same "random" pkey for
the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
Link: https://lkml.kernel.org/r/20210611164153.91B76FB8@viggo.jf.intel.com
Link: https://lkml.kernel.org/r/20210611164155.192D00FF@viggo.jf.intel.com
Fixes: 6e373263ce07 ("selftests/vm/pkeys: fix alloc_random_pkey() to make it really random")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dac0d1cfda56472378d330b1b76b9973557a7b1d ]
There is a memory leak in z3fold_destroy_pool() as it forgets to
free_percpu pool->unbuddied. Call free_percpu for pool->unbuddied to fix
this issue.
Link: https://lkml.kernel.org/r/20210619093151.1492174-6-linmiaohe@huawei.com
Fixes: d30561c56f ("z3fold: use per-cpu unbuddied lists")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit babbbdd08af98a59089334eb3effbed5a7a0cf7f ]
If other processes are mapping any other subpages of the hugepage, i.e.
in pte-mapped thp case, page_mapcount() will return 1 incorrectly. Then
we would discard the page while other processes are still mapping it. Fix
it by using total_mapcount() which can tell whether other processes are
still mapping it.
Link: https://lkml.kernel.org/r/20210511134857.1581273-6-linmiaohe@huawei.com
Fixes: b8d3c4c300 ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called")
Reviewed-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deeaf963569a0d9d1b08babb771f61bb501a5704 ]
For default (x16) scheme which is currently used by mvebu-uart.c driver,
maximal divisor of UART base clock is 1023*16. Therefore there is limit for
minimal supported baudrate. This change calculate it correctly and prevents
setting invalid divisor 0 into hardware registers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7d ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-4-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecd6b010d81f97b06b2f64d2d4f50ebf5acddaa9 ]
Testing mvuart->clk for non-error is not enough as mvuart->clk may contain
valid clk pointer but when clk_prepare_enable(mvuart->clk) failed then
port->uartclk is zero.
When mvuart->clk is not available then port->uartclk is zero too.
Parent clock rate port->uartclk is needed to calculate UART clock divisor
and without it is not possible to change baudrate.
So fix test condition when it is possible to change baudrate.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7d ("serial: mvebu-uart: add function to change baudrate")
Link: https://lore.kernel.org/r/20210624224909.6350-3-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bab26238bbd44d5a4687c0a64fd2c7f2755ea937 ]
printk_safe_flush_on_panic() has special lock breaking code for the case
where we panic()ed with the console lock held. It relies on panic IPI
causing other CPUs to mark themselves offline.
Do as most other architectures do.
This effectively reverts commit de6e5d3841 ("powerpc: smp_send_stop do
not offline stopped CPUs"), unfortunately it may result in some false
positive warnings, but the alternative is more situations where we can
crash without getting messages out.
Fixes: de6e5d3841 ("powerpc: smp_send_stop do not offline stopped CPUs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623041245.865134-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee78b9360e14c276f5ceaa4a0d06f790f04ccdad ]
In 'ktd2692_parse_dt()', if an error occurs after a successful
'regulator_enable()' call, we should call 'regulator_enable()'.
This is the same in 'ktd2692_probe()', if an error occurs after a
successful 'ktd2692_parse_dt()' call.
Instead of adding 'regulator_enable()' in several places, implement a
resource managed solution and simplify the remove function accordingly.
Fixes: b7da8c5c72 ("leds: Add ktd2692 flash LED driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a30960a2c5246c8ffebe8a3c9031f9df094d97 ]
Return error code -ENODEV rather than '0' when the indicator node can not
be found.
Fixes: a56ba8fbcb ("media: leds: as3645a: Add LED flash class driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c252b087de08d3cb32468b54a158bd7ad0ae2f7 ]
When reading binary attributes in progress, buffer->bin_buffer is setup in
configfs_read_bin_file() but never freed.
Fixes: 03607ace80 ("configfs: implement binary attributes")
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
[hch: move the vfree rather than duplicating it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b7961a326f8a7e03f54a19f02fedae8d488b80f ]
For both capture and playback streams to work at the same time, only the
needed values from a register need to be updated. Also, clocks should be
enabled only when the first stream is started and stopped when there is no
running stream.
Fixes: b543e467d1 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210618150741.401739-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ]
The platform device driver name is "max8997-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.
Fixes: b76668ba8a ("Extcon: add MAX8997 extcon driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ]
When sm5502_init_dev_type() iterates over sm5502_reg_data to
initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data).
There is no need to add another empty element to sm5502_reg_data.
Having the additional empty element in sm5502_reg_data will just
result in writing 0xff to register 0x00, which does not really
make sense.
Fixes: 914b881f94 ("extcon: sm5502: Add support new SM5502 extcon device driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7eedcb8539ddcbb6fe7791f1b4ccf43f905c72f ]
Add an error handling path in the probe to release some resources, as
already done in the remove function.
Fixes: 609adde838 ("phy: Add a driver for dm816x USB PHY")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a90bbb478dbf18ecdec9dcf8eb708e319d24264 ]
The current driver uses a value from register TEST_O as the original
value for register TEST_I, though, the value is overwritten by "param",
so there is a bug that the original value isn't no longer used.
The value of TEST_O[7:0] should be masked with "mask", replaced with
"param", and placed in the bitfield TESTI_DAT_MASK as new TEST_I value.
Fixes: c6d9b13241 ("phy: socionext: add PCIe PHY driver support")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1623037842-19363-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d3e88e336338834086278236d42039f3cde50e1 ]
In sdw_prep_deprep_slave_ports(), after the wait_for_completion()
the DP prepare status register is read. If this indicates that the
port is now prepared, the code should continue with the port setup.
It is irrelevant whether the wait_for_completion() timed out if the
port is now ready.
The previous implementation would always fail if the
wait_for_completion() timed out, even if the port was reporting
successful prepare.
This patch also fixes a minor bug where the return from sdw_read()
was not checked for error - any error code with LSBits clear could
be misinterpreted as a successful port prepare.
Fixes: 79df15b7d3 ("soundwire: Add helpers for ports operations")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210618144745.30629-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ]
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.
Link: https://lore.kernel.org/r/20210514081300.6650-1-thunder.leizhen@huawei.com
Fixes: f92363d123 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2892d8a00d23d511a0591ac4b2ff3f050ae1f004 ]
Variable "size" has type "phys_addr_t", which can be either 32-bit or
64-bit on 32-bit systems, while "unsigned long" is always 32-bit on
32-bit systems. Hence the cast in
(unsigned long)size / SZ_1M
may truncate a 64-bit size to 32-bit, as casts have a higher operator
precedence than divisions.
Fix this by inverting the order of the cast and division, which should
be safe for memory blocks smaller than 4 PiB. Note that the division is
actually a shift, as SZ_1M is a power-of-two constant, hence there is no
need to use div_u64().
While at it, use "%lu" to format "unsigned long".
Fixes: e8d9d1f548 ("drivers: of: add initialization code for static reserved memory")
Fixes: 3f0c820664 ("drivers: of: add initialization code for dynamic reserved memory")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/4a1117e72d13d26126f57be034c20dac02f1e915.1623835273.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fac165f22ac947b55407cd3a60a2a9824f905235 ]
The definition of CS42L42_ADC_PDN_MASK was incorrectly defined
as the HP_PDN bit.
Fixes: 2c394ca796 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210616135604.19363-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92babc9938ebbf4050f2fba774836f7edc16a570 ]
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a kernel
data leak, making for a less minimal fix.
Fixes: 1c28799257 ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec90b52c07c0403a6db60d752484ec08d605ead0 ]
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because the holes would
necessitate the addition of an explict memset(), to avoid a potential
kernel data leak, making for a less minimal fix.
Fixes: 55707294c4 ("iio: light: Add support for vishay vcnl4035")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-8-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78bcae8616ac277d6cb7f38e211493948ed73e30 ]
Support for magic baud rate divisors of 32770 and 32769 used with SMSC
Super I/O chips for extra baud rates of 230400 and 460800 respectively
where base rate is 115200[1] has been added around Linux 2.5.64, which
predates our repo history, but the origin could be identified as commit
2a717aad772f ("Merge with Linux 2.5.64.") with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>.
Code that is now in `serial8250_do_get_divisor' was added back then to
`serial8250_get_divisor', but that code would only ever trigger if one
of the higher baud rates was actually requested, and that cannot ever
happen, because the earlier call to `serial8250_get_baud_rate' never
returns them. This is because it calls `uart_get_baud_rate' with the
maximum requested being the base rate, that is clk/16 or 115200 for SMSC
chips at their nominal clock rate.
Fix it then and allow UPF_MAGIC_MULTIPLIER baud rates to be selected, by
requesting the maximum baud rate of clk/4 rather than clk/16 if the flag
has been set. Also correct the minimum baud rate, observing that these
ports only support actual (non-magic) divisors of up to 32767 only.
References:
[1] "FDC37M81x, PC98/99 Compliant Enhanced Super I/O Controller with
Keyboard/Mouse Wake-Up", Standard Microsystems Corporation, Rev.
03/27/2000, Table 31 - "Baud Rates", p. 77
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2105190412280.29169@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b4f167ef3555ec4c334a8dc89c1b44bb2c6bff5 ]
Driver code call 'devm_of_pci_get_host_bridge_resources'
to get resources and properly fill 'bridge->windows' and
'bridge->dma_ranges'. After parsing the ranges and store
as resources, at the end it makes a call to pci function
'pci_add_resource_offset' to set the offset for the
memory resource. To calculate offset, resource start address
subtracts pci address of the range. MT7621 does not need
any offset for the memory resource. Moreover, setting an
offset got into 'WARN_ON' calls from pci devices driver code.
Until now memory range pci_addr was being '0x00000000' and
res->start is '0x60000000' but becase pci controller driver
was manually setting resources and adding them using pci function
'pci_add_resource' where a zero is passed as offset, things
was properly working. Since PCI_IOBASE is defined now for
ralink we don't set nothing manually anymore so we have to
properly fix PCI address for this range to make things work
and the new pci address must be set to '0x60000000'. Doing
in this way the subtract result obtain zero as offset
and pci device driver code properly works.
Fixes: d59578da2b ("staging: mt7621-dts: add dts files")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210614100617.28753-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e02a3b945816a77702a2769a70ef5f9b06e49d54 ]
There is a leak in rtl8712 driver.
The problem was in non-freed adapter data if
firmware load failed.
This leak can be reproduced with this code:
https://syzkaller.appspot.com/text?tag=ReproC&x=16612f02d00000,
Autoload must fail (to not hit memory leak reported by syzkaller)
There are 2 possible ways how rtl871x_load_fw_cb() and
r871xu_dev_remove() can be called (in case of fw load error).
1st case:
r871xu_dev_remove() then rtl871x_load_fw_cb()
In this case r871xu_dev_remove() will wait for
completion and then will jump to the end, because
rtl871x_load_fw_cb() set intfdata to NULL:
if (pnetdev) {
struct _adapter *padapter = netdev_priv(pnetdev);
/* never exit with a firmware callback pending */
wait_for_completion(&padapter->rtl8712_fw_ready);
pnetdev = usb_get_intfdata(pusb_intf);
usb_set_intfdata(pusb_intf, NULL);
if (!pnetdev)
goto firmware_load_fail;
... clean up code here ...
}
2nd case:
rtl871x_load_fw_cb() then r871xu_dev_remove()
In this case pnetdev (from code snippet above) will
be zero (because rtl871x_load_fw_cb() set it to NULL)
And clean up code won't be executed again.
So, in all cases we need to free adapted data in rtl871x_load_fw_cb(),
because disconnect function cannot take care of it. And there won't be
any race conditions, because complete() call happens after setting
intfdata to NULL.
In previous patch I moved out free_netdev() from r8712_free_drv_sw()
and that's why now it's possible to free adapter data and then call
complete.
Fixes: 8c213fa591 ("staging: r8712u: Use asynchronous firmware loading")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/81e68fe0194499cc2e7692d35bc4dcf167827d8f.1623620630.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69d998f1e552f6e2e7b55f5058ce1ac7a72903f9 ]
padapter->dvobj_init is initialized rigth before
initialization check. There is no need for any
branching here.
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/d367e5f39f22af44c545f8710cc18fb00f10e66c.1623620630.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7002b526f4ff1f6da34356e67085caafa6be383a ]
This code assumes that "len" is at least 62 bytes, but we need a check
to prevent a read overflow.
Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YMcoTPsCYlhh2TQo@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a36e160856db8a8ddd6a3d2e5db5a850ab87f82 ]
There needs to be a check to verify that we don't read beyond the end
of "buf". This function is called from do_rx(). The "buf" is the USB
transfer_buffer and "len" is "urb->actual_length".
Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YMcnl4zCwGWGDVMG@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f939fd20690623cb24845a563e7bc1e4a21482 ]
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Here an explicit structure is not used, because this buffer is used in
a non-trivial way for data repacking.
Fixes: 121354b2ec ("iio: magnetometer: Add driver support for PNI RM3100")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Song Qiang <songqiang1304521@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-6-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fa5dfa5f52806f5ce37a0ba5712c271eb22f98 ]
Add __aligned(8) to ensure the buffer passed to
iio_push_to_buffers_with_timestamp() is suitable for the naturally
aligned timestamp that will be inserted.
Fixes: f214ff521f ("iio: ti-ads8688: Update buffer allocation for timestamps")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-5-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a6be221b8bd561b053f0701ec752a5ed9007f69 ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Add a comment on why the buffer is the size it is as not immediately
obvious.
Found during an audit of all calls of this function.
Fixes: 6dd112b9f8 ("iio: adc: mxs-lradc: Add support for ADC driver")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-4-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe2a789fbf7acd1a05407fc7839cc08d23825e3 ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: d3bf60450d ("iio: hx711: add triggered buffer support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andreas Klinger <ak@it-klinger.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-3-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f884758966259fa8c50c137ac6d4ce9bb7859db ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: 5e1a1da0f8 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210613152301.571002-2-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf35aad0baa05823df31fda42df4b67f72e6e72 ]
We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.
Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.
For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information,
and also keeping a reference to the iio device for some quirky paths.
One [quirky] path is the at91_adc_workq_handler() which requires the IIO
device & the state struct to push to buffers.
Since this requires the back-ref to the IIO device, the
at91_adc_touch_pos() also uses it. This simplifies the patch a bit. The
information required in this function is mostly for debugging purposes.
Replacing it with a reference to the IIO device would have been a slightly
bigger change, which may not be worth it (for just the debugging purpose
and given that we need the back-ref to the IIO device anyway).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0db3deea73ba418bf5dc21f5a4e32ca87d16dde ]
When iterating over child firmware nodes restore printing the name of ones
that are not supported.
While at it, refactor loop body to clearly show that we stop at the first match.
Fixes: db15d73e5f ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6ee1c095156a74ab2df605af13020f1ce3e600 ]
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: db15d73e5f ("eeprom: idt_89hpesx: Support both ACPI and OF probing")
Cc: Huy Duong <qhuyduong@hotmail.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210607221757.81465-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aafe93516b8567ab5864e1f4cd3eeabc54fb0e5a ]
Every time the hub signals a reset while we (device) are hsotg->connected,
dwc2_hsotg_core_init_disconnected() is called, which in turn calls
dwc2_hs_phy_init().
GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if
hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the
default one: 0x5, corresponding to 16-bit) is always different from
hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every
time (usbcfg != usbcfg_old), which causes 2 issues:
1) The call to dwc2_core_reset() does another reset 300us after the initial
Chirp K of the first reset (which should last at least Tuch = 1ms), and
messes up the High-speed Detection Handshake: both hub and device drive
current into the D+ and D- lines at the same time.
2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always
the default one (0x5).
Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset()
fixes both issues. It is now set even when select_phy is false because the
cost of the Core Soft Reset is removed.
Fixes: 1e868545f2 ("usb: dwc2: gadget: Move gadget phy init into core phy init")
Signed-off-by: Clément Lassieur <clement@lassieur.org>
Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Zhizhikin