commit 05d5233df85e9621597c5838e95235107eb624a2 upstream.
Add missing __acquires() and __releases() annotations. Also, in an
"this should never happen" WARN_ON check, if it *does* actually
happen, we need to release j_state_lock since this function is always
supposed to release that lock. Otherwise, things will quickly grind
to a halt after the WARN_ON trips.
Fixes: 96f1e09745 ("jbd2: avoid long hold times of j_state_lock...")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e106aa3509b86738769775969822ffc1ec21bf4 upstream.
The exit_pi_state_list() function calls put_pi_state() with IRQs disabled
and is not expecting that IRQs will be enabled inside the function.
Use the _irqsave() variant so that IRQs are restored to the original state
instead of being enabled unconditionally.
Fixes: 153fbd1226 ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bcbc0b2e275f0a797de11a10eff495b4571863fc upstream.
A receive callback is queued while the client is still connected
but can still be called after the client was disconnected. Upon
disconnect cl->me_cl is set to NULL, hence we need to check
that ME client is not-NULL in mei_cl_mtu to avoid
null dereference.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d516aa82b7d4fbe7f6303348697960ba03a530b upstream.
Since commit 086d08725d ("remoteproc: create vdev subdevice with
specific dma memory pool"), every remoteproc has a DMA subdevice
("remoteprocX#vdevYbuffer") for each virtio device, which inherits
DMA capabilities from the corresponding platform device. This allowed
to associate different DMA pools with each vdev, and required from
virtio drivers to perform DMA operations with the parent device
(vdev->dev.parent) instead of grandparent (vdev->dev.parent->parent).
virtio_rpmsg_bus was already changed in the same merge cycle with
commit d999b622fc ("rpmsg: virtio: allocate buffer from parent"),
but virtio_console did not. In fact, operations using the grandparent
worked fine while the grandparent was the platform device, but since
commit c774ad010873 ("remoteproc: Fix and restore the parenting
hierarchy for vdev") this was changed, and now the grandparent device
is the remoteproc device without any DMA capabilities.
So, starting v5.8-rc1 the following warning is observed:
[ 2.483925] ------------[ cut here ]------------
[ 2.489148] WARNING: CPU: 3 PID: 101 at kernel/dma/mapping.c:427 0x80e7eee8
[ 2.489152] Modules linked in: virtio_console(+)
[ 2.503737] virtio_rpmsg_bus rpmsg_core
[ 2.508903]
[ 2.528898] <Other modules, stack and call trace here>
[ 2.913043]
[ 2.914907] ---[ end trace 93ac8746beab612c ]---
[ 2.920102] virtio-ports vport1p0: Error allocating inbufs
kernel/dma/mapping.c:427 is:
WARN_ON_ONCE(!dev->coherent_dma_mask);
obviously because the grandparent now is remoteproc dev without any
DMA caps:
[ 3.104943] Parent: remoteproc0#vdev1buffer, grandparent: remoteproc0
Fix this the same way as it was for virtio_rpmsg_bus, using just the
parent device (vdev->dev.parent, "remoteprocX#vdevYbuffer") for DMA
operations.
This also allows now to reserve DMA pools/buffers for rproc serial
via Device Tree.
Fixes: c774ad010873 ("remoteproc: Fix and restore the parenting hierarchy for vdev")
Cc: stable@vger.kernel.org # 5.1+
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Date: Thu, 5 Nov 2020 11:10:24 +0800
Link: https://lore.kernel.org/r/AOKowLclCbOCKxyiJ71WeNyuAAj2q8EUtxrXbyky5E@cp7-web-042.plabs.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76255470ffa2795a44032e8b3c1ced11d81aa2db upstream.
pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. We should decrease the usage count
whetever it succeeded or failed(maybe runtime of the device has
error, or device is in inaccessible state, or other error state).
If we do not call put operation to decrease the reference, it will
result in reference leak in xhci_histb_probe. Moreover, this
device cannot enter the idle state and always stay busy or other
non-idle state later. So we fixed it by jumping to error handling
branch.
Fixes: c508f41da0 ("xhci: hisilicon: support HiSilicon STB xHCI host controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201106122221.2304528-1-zhangqilong3@huawei.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d853c9e4104b4fc8d55dc9cd3b99712aa347174 upstream.
Renesas R-Car and RZ/G SoCs have a firmware download mode over USB.
However, on reset a banner string is transmitted out which is not expected
to be echoed back and will corrupt the protocol.
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Link: https://lore.kernel.org/r/20201111131209.3977903-1-chris.brandt@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7342ca34d931a357d408aaa25fadd031e46af137 upstream.
ring_request_msix() misses to call ida_simple_remove() in an error path.
Add a label 'err_ida_remove' and jump to it.
Fixes: 046bee1f9a ("thunderbolt: Add MSI-X support")
Cc: stable@vger.kernel.org
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a663e0df4a374b8537562a44d1cecafb472cd65b upstream.
The svc->key field is not released as it should be if ida_simple_get()
fails so fix that.
Fixes: 9aabb68568 ("thunderbolt: Fix to check return value of ida_simple_get")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f81cb2c3ad41ac6d8cb2650e3d72d5f67db1aa28 upstream.
ID registers are RAZ until they've been allocated a purpose, but
that doesn't mean they should be removed from the KVM_GET_REG_LIST
list. So far we only have one register, SYS_ID_AA64ZFR0_EL1, that
is hidden from userspace when its function, SVE, is not present.
Expose SYS_ID_AA64ZFR0_EL1 to userspace as RAZ when SVE is not
implemented. Removing the userspace visibility checks is enough
to reexpose it, as it will already return zero to userspace when
SVE is not present. The register already behaves as RAZ for the
guest when SVE is not present.
Fixes: 73433762fc ("KVM: arm64/sve: System register context switch and access support")
Reported-by: 张东旭 <xu910121@sina.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org#v5.2+
Link: https://lore.kernel.org/r/20201105091022.15373-2-drjones@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf89af146b7e62af55470cf5f3ec3c56ec144a5e upstream.
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
panic+0x347/0x7c0 kernel/panic.c:231
__warn.cold+0x20/0x46 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
btrfs_fill_super fs/btrfs/super.c:1316 [inline]
btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672
The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).
CC: stable@vger.kernel.org # 4.19+
Reported-by: syzbot+4cfe71a4da060be47502@syzkaller.appspotmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 468600c6ec28613b756193c5f780aac062f1acdf upstream.
There is one error handling path that does not free ref, which may cause
a minor memory leak.
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7067b2619017d51e71686ca9756b454de0e5826a upstream.
It takes xattr_sem to check inline data again but without unlock it
in case not have. So unlock it before return.
Fixes: aef1c8513c ("ext4: let ext4_truncate handle inline data correctly")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1604370542-124630-1-git-send-email-joseph.qi@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 174fe5ba2d1ea0d6c5ab2a7d4aa058d6d497ae4d upstream.
The macro MOPT_Q is used to indicates the mount option is related to
quota stuff and is defined to be MOPT_NOSUPPORT when CONFIG_QUOTA is
disabled. Normally the quota options are handled explicitly, so it
didn't matter that the MOPT_STRING flag was missing, even though the
usrjquota and grpjquota mount options take a string argument. It's
important that's present in the !CONFIG_QUOTA case, since without
MOPT_STRING, the mount option matcher will match usrjquota= followed
by an integer, and will otherwise skip the table entry, and so "mount
option not supported" error message is never reported.
[ Fixed up the commit description to better explain why the fix
works. --TYT ]
Fixes: 26092bf524 ("ext4: use a table-driven handler for mount options")
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1603986396-28917-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3938ee23e97bfcac2e0eb6b356875da73d700df upstream.
EROFS has _only one_ ondisk timestamp (ctime is currently
documented and recorded, we might also record mtime instead
with a new compat feature if needed) for each extended inode
since EROFS isn't mainly for archival purposes so no need to
keep all timestamps on disk especially for Android scenarios
due to security concerns. Also, romfs/cramfs don't have their
own on-disk timestamp, and squashfs only records mtime instead.
Let's also derive access time from ondisk timestamp rather than
leaving it empty, and if mtime/atime for each file are really
needed for specific scenarios as well, we can also use xattrs
to record them then.
Link: https://lore.kernel.org/r/20201031195102.21221-1-hsiangkao@aol.com
[ Gao Xiang: It'd be better to backport for user-friendly concern. ]
Fixes: 431339ba90 ("staging: erofs: add inode operations")
Cc: stable <stable@vger.kernel.org> # 4.19+
Reported-by: nl6720 <nl6720@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9e2b7fa2df4365e99934901da4fb4af52d81e820 ]
VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.
Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.
Fixes: dcdd43c41e ("net: vrf: performance improvements for IPv4")
Fixes: a9ec54d1b0 ("net: vrf: performance improvements for IPv6")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52755b66ddcef2e897778fac5656df18817b59ab ]
If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5bea04fcc0b3c0aec71ee1fd58fd4ff7ee36177 ]
Commit dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on
powerpc") added a check to of_dma_is_coherent which returns early
if OF_DMA_DEFAULT_COHERENT is enabled. This results in the of_node_put()
being skipped causing a memory leak. Moved the of_node_get() below this
check so we now we only get the node if OF_DMA_DEFAULT_COHERENT is not
enabled.
Fixes: dabf6b36b83a ("of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc")
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20201110022825.30895-1-evan.nimmo@alliedtelesis.co.nz
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd3fa793aaa7e98b74e3653fdcc72fa753913b5 ]
We also need to drop the iolock when invalidate_inode_pages2 fails, not
only on all other error or successful cases.
Fixes: 527851124d ("xfs: implement pNFS export operations")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b52a4b65bc8f14520fe6e996ea7fb3f7e400761 ]
In the net core, the struct net_device_ops -> ndo_set_rx_mode()
callback is called with the dev->addr_list_lock spinlock held.
However, this driver's ndo_set_rx_mode callback eventually calls
lan743x_dp_write(), which acquires a mutex. Mutex acquisition
may sleep, and this is not allowed when holding a spinlock.
Fix by removing the dp_lock mutex entirely. Its purpose is to
prevent concurrent accesses to the data port. No concurrent
accesses are possible, because the dev->addr_list_lock
spinlock in the core only lets through one thread at a time.
Fixes: 23f0703c12 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54e9b09e153842ab5adb8a460b891e11b39e9c3d ]
Fix some serious WTF in the reference count scrubber's rmap fragment
processing. The code comment says that this loop is supposed to move
all fragment records starting at or before bno onto the worklist, but
there's no obvious reason why nr (the number of items added) should
increment starting from 1, and breaking the loop when we've added the
target number seems dubious since we could have more rmap fragments that
should have been added to the worklist.
This seems to manifest in xfs/411 when adding one to the refcount field.
Fixes: dbde19da96 ("xfs: cross-reference the rmapbt data with the refcountbt")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ff646b2ceb0eec916101877f38da0b73e3a5b7f ]
Keys for extent interval records in the reverse mapping btree are
supposed to be computed as follows:
(physical block, owner, fork, is_btree, is_unwritten, offset)
This provides users the ability to look up a reverse mapping from a bmbt
record -- start with the physical block; then if there are multiple
records for the same block, move on to the owner; then the inode fork
type; and so on to the file offset.
However, the key comparison functions incorrectly remove the
fork/btree/unwritten information that's encoded in the on-disk offset.
This means that lookup comparisons are only done with:
(physical block, owner, offset)
This means that queries can return incorrect results. On consistent
filesystems this hasn't been an issue because blocks are never shared
between forks or with bmbt blocks; and are never unwritten. However,
this bug means that online repair cannot always detect corruption in the
key information in internal rmapbt nodes.
Found by fuzzing keys[1].attrfork = ones on xfs/371.
Fixes: 4b8ed67794 ("xfs: add rmap btree operations")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dda3897fd90783358c4c6115ef86047d8c8f503 ]
When the bmbt scrubber is looking up rmap extents, we need to set the
extent flags from the bmbt record fully. This will matter once we fix
the rmap btree comparison functions to check those flags correctly.
Fixes: d852657ccf ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea8439899c0b15a176664df62aff928010fad276 ]
Pass the same oldext argument (which contains the existing rmapping's
unwritten state) to xfs_rmap_lookup_le_range at the start of
xfs_rmap_convert_shared. At this point in the code, flags is zero,
which means that we perform lookups using the wrong key.
Fixes: 3f165b334e ("xfs: convert unwritten status of reverse mappings for shared files")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b7ed22ae4c96a415001f0c3116ebee15bb8491a ]
'igc_update_stats()' was not updating 'netdev->stats', so the returned
statistics, for example, requested by:
$ ip -s link show dev enp3s0
were not being updated and were always zero.
Fix by returning a set of statistics that are actually being
updated (adapter->stats64).
Fixes: c9a11c23ce ("igc: Add netdev")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd645b2d3f0bacadaa6037f067538e1cd4e42ef ]
bdget_disk needs to be paired with bdput to not leak a reference
on the block device inode.
Fixes: 08ba91ee6e ("nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3bec0138bfbe58606fc1d6f57a4cdc1a20218db ]
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d321ff589c16d8c2207485a6d7fbdb14e873d46e ]
The TP_fast_assign() section is careful enough not to dereference
xdr->rqst if it's NULL. The TP_STRUCT__entry section is not.
Fixes: 5582863f45 ("SUNRPC: Add XDR overflow trace event")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 465e7baab6d93b399344f5868f84c177ab5cd16f ]
When a rule is duplicated, the refcount of the rule is increased so only
the second deletion of the rule should cause destruction of the FTE.
Currently, the FTE will be destroyed in the first deletion of rule since
the modify_mask will be 0.
Fix it and call to destroy FTE only if all the rules (FTE's children)
have been removed.
Fixes: 718ce4d601 ("net/mlx5: Consolidate update FTE for all removal changes")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b92f5c51e9a41352d665f6f956bd95085a56a83 ]
Some gpio pin at aspeed soc is input only and the prefix name of these
pin is "GPI" only.
This patch fine-tune the condition of GPIO check from "GPIO" to "GPI"
and it will fix the usage error of banks D and E in the AST2400/AST2500
and banks T and U in the AST2600.
Fixes: 4d3d0e4272 ("pinctrl: Add core support for Aspeed SoCs")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201030055450.29613-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 080b6f40763565f65ebb9540219c71ce885cf568 ]
Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for
___bpf_prog_run()") introduced a __no_fgcse macro that expands to a
function scope __attribute__((optimize("-fno-gcse"))), to disable a
GCC specific optimization that was causing trouble on x86 builds, and
was not expected to have any positive effect in the first place.
However, as the GCC manual documents, __attribute__((optimize))
is not for production use, and results in all other optimization
options to be forgotten for the function in question. This can
cause all kinds of trouble, but in one particular reported case,
it causes -fno-asynchronous-unwind-tables to be disregarded,
resulting in .eh_frame info to be emitted for the function.
This reverts commit 3193c0836, and instead, it disables the -fgcse
optimization for the entire source file, but only when building for
X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the
original commit states that CONFIG_RETPOLINE=n triggers the issue,
whereas CONFIG_RETPOLINE=y performs better without the optimization,
so it is kept disabled in both cases.
Fixes: 3193c0836f ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3c75e7a9349d1d33eb53ddc1b31640994969f73 ]
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel pin control hardware the 5 kOhm sounds plausible
because on one hand it's a minimum of resistors present in all
hardware generations and at the same time it's high enough to minimize
leakage current (will be only 200 uA with the above choice).
Fixes: e57725eabf ("pinctrl: intel: Add support for hardware debouncer")
Reported-by: Jamie McClymont <jamie@kwiius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a75bfc824a2d33f57ebdc003bfe6b7a9e11e9cb9 upstream.
When changing to use suspend-to-idle to save power, the PMIC irq can not
wakeup the system due to lack of wakeup capability, which will cause
the sub-irqs (such as power key) of the PMIC can not wake up the system.
Thus we can add the wakeup capability for PMIC irq to solve this issue,
as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be
a wakeup source.
Reported-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Tested-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5167c506d62dd9ffab73eba23c79b0a8845c9fe1 upstream.
Suspend to IDLE invokes tick_unfreeze() on resume. tick_unfreeze() on the
first resuming CPU resumes timekeeping, which also has the side effect of
resetting the softlockup watchdog on this CPU.
But on the secondary CPUs the watchdog is not reset in the resume /
unfreeze() path, which can result in false softlockup warnings on those
CPUs depending on the time spent in suspend.
Prevent this by clearing the softlock watchdog in the unfreeze path also
on the secondary resuming CPUs.
[ tglx: Massaged changelog ]
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200110083902.27276-1-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc7f2cd7559c5595dc38b909ae9a8d43e0215994 upstream.
Removing the duplicate gpio chip select level handling in
bcm2835_spi_setup() left the lflags variable uninitialized. Avoid trhe
use of such variable by passing default flags to
gpiochip_request_own_desc().
Fixes: 5e31ba0c0543 ("spi: bcm2835: fix gpio cs level inversion")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201105090615.620315-1-martin@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b154ce11ead925de6a94feb3b0317fafeefa0ebc ]
There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79605f1394261995c2b955c906a5a20fb27cdc84 ]
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this
should be calculated based on PAGE_OFFSET somehow? Even better would be to
deprecate text_offset and instead introduce something absolute.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ae6c6e8a3ea49076d826c64e63ea78fbf9db43 ]
Makefile already contains -D_GNU_SOURCE, so we can remove it from the
*.c files.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6d2b0fbb893d5c7dda405aa0e7bcbecf1c75f98 ]
Concurrent operation of VCN and JPEG decoder in DPG mode is
causing ring timeout due to power state.
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aafced673c06b7c77040c1df42e2e965be5d0376 ]
The i2c driver default do dma reset after i2c reset, but sometimes
i2c reset will trigger dma tx2rx, then apdma write data to dram
which has been i2c_put_dma_safe_msg_buf(kfree). Move dma reset
before i2c reset in mtk_i2c_init_hw to fix it.
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4eccb853664de7bcf9518fb658f35e748bf1f68 ]
Bypass the IGD initialization when -ENODEV returns,
that should be the case if opregion is not available for IGD
or within discrete graphics device's option ROM,
or host/lpc bridge is not found.
Then use of -ENODEV here means no special device resources found
which needs special care for VFIO, but we still allow other normal
device resource access.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Fred Gao <fred.gao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb742ad01961a3b9d1f9d19375487b879668b6b2 ]
pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put will result in
reference leak in vfio_platform_open, so we should fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de5d9dae150ca1c1b5c7676711a9ca139d1a8dec ]
The call to rcu_cpu_starting() in smp_init_secondary() is not early
enough in the CPU-hotplug onlining process, which results in lockdep
splats as follows:
WARNING: suspicious RCU usage
-----------------------------
kernel/locking/lockdep.c:3497 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
Call Trace:
show_stack+0x158/0x1f0
dump_stack+0x1f2/0x238
__lock_acquire+0x2640/0x4dd0
lock_acquire+0x3a8/0xd08
_raw_spin_lock_irqsave+0xc0/0xf0
clockevents_register_device+0xa8/0x528
init_cpu_timer+0x33e/0x468
smp_init_secondary+0x11a/0x328
smp_start_secondary+0x82/0x88
This is avoided by moving the call to rcu_cpu_starting up near the
beginning of the smp_init_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into
lockdep before RCU has declared the CPU to be watched for readers.
Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/
Signed-off-by: Qian Cai <cai@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73db2fc595f358460ce32bcaa3be1f0cce4a2db1 ]
Certain device drivers allocate IO queues on a per-cpu basis.
On AMD EPYC platform, which can support up-to 256 cpu threads,
this can exceed the current MAX_IRQ_PER_TABLE limit of 256,
and result in the error message:
AMD-Vi: Failed to allocate IRTE
This has been observed with certain NVME devices.
AMD IOMMU hardware can actually support upto 512 interrupt
remapping table entries. Therefore, update the driver to
match the hardware limit.
Please note that this also increases the size of interrupt remapping
table to 8KB per device when using the 128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201015025002.87997-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a8a2c85b83589a5c10bc5564b796836bf4b4984 ]
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdf58e02adecbef4c7cbb2073d8ea225e6fd5f26 ]
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
