mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 22:08:52 +09:00
![Kever Yang](/assets/img/avatar_default.png)
Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
670 lines
17 KiB
C
670 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
|
|
* Author: Andy Yan <andy.yan@rock-chips.com>
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <mapmem.h>
|
|
#include <syscon.h>
|
|
#include <bitfield.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_rk3368.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <dm/lists.h>
|
|
#include <dt-bindings/clock/rk3368-cru.h>
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rk3368_clk_plat {
|
|
struct dtd_rockchip_rk3368_cru dtd;
|
|
};
|
|
#endif
|
|
|
|
struct pll_div {
|
|
u32 nr;
|
|
u32 nf;
|
|
u32 no;
|
|
};
|
|
|
|
#define OSC_HZ (24 * 1000 * 1000)
|
|
#define APLL_L_HZ (800 * 1000 * 1000)
|
|
#define APLL_B_HZ (816 * 1000 * 1000)
|
|
#define GPLL_HZ (576 * 1000 * 1000)
|
|
#define CPLL_HZ (400 * 1000 * 1000)
|
|
|
|
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
|
|
|
|
#define PLL_DIVISORS(hz, _nr, _no) { \
|
|
.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no}; \
|
|
_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
|
|
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \
|
|
"divisors on line " __stringify(__LINE__));
|
|
|
|
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
|
|
static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2);
|
|
static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2);
|
|
#if !defined(CONFIG_TPL_BUILD)
|
|
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 1, 2);
|
|
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 6);
|
|
#endif
|
|
#endif
|
|
|
|
static ulong rk3368_clk_get_rate(struct clk *clk);
|
|
|
|
/* Get pll rate by id */
|
|
static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru,
|
|
enum rk3368_pll_id pll_id)
|
|
{
|
|
uint32_t nr, no, nf;
|
|
uint32_t con;
|
|
struct rk3368_pll *pll = &cru->pll[pll_id];
|
|
|
|
con = readl(&pll->con3);
|
|
|
|
switch ((con & PLL_MODE_MASK) >> PLL_MODE_SHIFT) {
|
|
case PLL_MODE_SLOW:
|
|
return OSC_HZ;
|
|
case PLL_MODE_NORMAL:
|
|
con = readl(&pll->con0);
|
|
no = ((con & PLL_OD_MASK) >> PLL_OD_SHIFT) + 1;
|
|
nr = ((con & PLL_NR_MASK) >> PLL_NR_SHIFT) + 1;
|
|
con = readl(&pll->con1);
|
|
nf = ((con & PLL_NF_MASK) >> PLL_NF_SHIFT) + 1;
|
|
|
|
return (24 * nf / (nr * no)) * 1000000;
|
|
case PLL_MODE_DEEP_SLOW:
|
|
default:
|
|
return 32768;
|
|
}
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
|
|
static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id,
|
|
const struct pll_div *div)
|
|
{
|
|
struct rk3368_pll *pll = &cru->pll[pll_id];
|
|
/* All PLLs have same VCO and output frequency range restrictions*/
|
|
uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
|
|
uint output_hz = vco_hz / div->no;
|
|
|
|
debug("PLL at %p: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
|
|
pll, div->nf, div->nr, div->no, vco_hz, output_hz);
|
|
|
|
/* enter slow mode and reset pll */
|
|
rk_clrsetreg(&pll->con3, PLL_MODE_MASK | PLL_RESET_MASK,
|
|
PLL_RESET << PLL_RESET_SHIFT);
|
|
|
|
rk_clrsetreg(&pll->con0, PLL_NR_MASK | PLL_OD_MASK,
|
|
((div->nr - 1) << PLL_NR_SHIFT) |
|
|
((div->no - 1) << PLL_OD_SHIFT));
|
|
writel((div->nf - 1) << PLL_NF_SHIFT, &pll->con1);
|
|
/*
|
|
* BWADJ should be set to NF / 2 to ensure the nominal bandwidth.
|
|
* Compare the RK3368 TRM, section "3.6.4 PLL Bandwidth Adjustment".
|
|
*/
|
|
clrsetbits_le32(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
|
|
|
|
udelay(10);
|
|
|
|
/* return from reset */
|
|
rk_clrreg(&pll->con3, PLL_RESET_MASK);
|
|
|
|
/* waiting for pll lock */
|
|
while (!(readl(&pll->con1) & PLL_LOCK_STA))
|
|
udelay(1);
|
|
|
|
rk_clrsetreg(&pll->con3, PLL_MODE_MASK,
|
|
PLL_MODE_NORMAL << PLL_MODE_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
|
|
static void rkclk_init(struct rk3368_cru *cru)
|
|
{
|
|
u32 apllb, aplll, dpll, cpll, gpll;
|
|
|
|
rkclk_set_pll(cru, APLLB, &apll_b_init_cfg);
|
|
rkclk_set_pll(cru, APLLL, &apll_l_init_cfg);
|
|
#if !defined(CONFIG_TPL_BUILD)
|
|
/*
|
|
* If we plan to return to the boot ROM, we can't increase the
|
|
* GPLL rate from the SPL stage.
|
|
*/
|
|
rkclk_set_pll(cru, GPLL, &gpll_init_cfg);
|
|
rkclk_set_pll(cru, CPLL, &cpll_init_cfg);
|
|
#endif
|
|
|
|
apllb = rkclk_pll_get_rate(cru, APLLB);
|
|
aplll = rkclk_pll_get_rate(cru, APLLL);
|
|
dpll = rkclk_pll_get_rate(cru, DPLL);
|
|
cpll = rkclk_pll_get_rate(cru, CPLL);
|
|
gpll = rkclk_pll_get_rate(cru, GPLL);
|
|
|
|
debug("%s apllb(%d) apll(%d) dpll(%d) cpll(%d) gpll(%d)\n",
|
|
__func__, apllb, aplll, dpll, cpll, gpll);
|
|
}
|
|
#endif
|
|
|
|
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
|
|
static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id)
|
|
{
|
|
u32 div, con, con_id, rate;
|
|
u32 pll_rate;
|
|
|
|
switch (clk_id) {
|
|
case HCLK_SDMMC:
|
|
con_id = 50;
|
|
break;
|
|
case HCLK_EMMC:
|
|
con_id = 51;
|
|
break;
|
|
case SCLK_SDIO0:
|
|
con_id = 48;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
con = readl(&cru->clksel_con[con_id]);
|
|
switch (con & MMC_PLL_SEL_MASK) {
|
|
case MMC_PLL_SEL_GPLL:
|
|
pll_rate = rkclk_pll_get_rate(cru, GPLL);
|
|
break;
|
|
case MMC_PLL_SEL_24M:
|
|
pll_rate = OSC_HZ;
|
|
break;
|
|
case MMC_PLL_SEL_CPLL:
|
|
pll_rate = rkclk_pll_get_rate(cru, CPLL);
|
|
break;
|
|
case MMC_PLL_SEL_USBPHY_480M:
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
div = (con & MMC_CLK_DIV_MASK) >> MMC_CLK_DIV_SHIFT;
|
|
rate = DIV_TO_RATE(pll_rate, div);
|
|
|
|
debug("%s: raw rate %d (post-divide by 2)\n", __func__, rate);
|
|
return rate >> 1;
|
|
}
|
|
|
|
static ulong rk3368_mmc_find_best_rate_and_parent(struct clk *clk,
|
|
ulong rate,
|
|
u32 *best_mux,
|
|
u32 *best_div)
|
|
{
|
|
int i;
|
|
ulong best_rate = 0;
|
|
const ulong MHz = 1000000;
|
|
const struct {
|
|
u32 mux;
|
|
ulong rate;
|
|
} parents[] = {
|
|
{ .mux = MMC_PLL_SEL_CPLL, .rate = CPLL_HZ },
|
|
{ .mux = MMC_PLL_SEL_GPLL, .rate = GPLL_HZ },
|
|
{ .mux = MMC_PLL_SEL_24M, .rate = 24 * MHz }
|
|
};
|
|
|
|
debug("%s: target rate %ld\n", __func__, rate);
|
|
for (i = 0; i < ARRAY_SIZE(parents); ++i) {
|
|
/*
|
|
* Find the largest rate no larger than the target-rate for
|
|
* the current parent.
|
|
*/
|
|
ulong parent_rate = parents[i].rate;
|
|
u32 div = DIV_ROUND_UP(parent_rate, rate);
|
|
u32 adj_div = div;
|
|
ulong new_rate = parent_rate / adj_div;
|
|
|
|
debug("%s: rate %ld, parent-mux %d, parent-rate %ld, div %d\n",
|
|
__func__, rate, parents[i].mux, parents[i].rate, div);
|
|
|
|
/* Skip, if not representable */
|
|
if ((div - 1) > MMC_CLK_DIV_MASK)
|
|
continue;
|
|
|
|
/* Skip, if we already have a better (or equal) solution */
|
|
if (new_rate <= best_rate)
|
|
continue;
|
|
|
|
/* This is our new best rate. */
|
|
best_rate = new_rate;
|
|
*best_mux = parents[i].mux;
|
|
*best_div = div - 1;
|
|
}
|
|
|
|
debug("%s: best_mux = %x, best_div = %d, best_rate = %ld\n",
|
|
__func__, *best_mux, *best_div, best_rate);
|
|
|
|
return best_rate;
|
|
}
|
|
|
|
static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate)
|
|
{
|
|
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
|
|
struct rk3368_cru *cru = priv->cru;
|
|
ulong clk_id = clk->id;
|
|
u32 con_id, mux = 0, div = 0;
|
|
|
|
/* Find the best parent and rate */
|
|
rk3368_mmc_find_best_rate_and_parent(clk, rate << 1, &mux, &div);
|
|
|
|
switch (clk_id) {
|
|
case HCLK_SDMMC:
|
|
con_id = 50;
|
|
break;
|
|
case HCLK_EMMC:
|
|
con_id = 51;
|
|
break;
|
|
case SCLK_SDIO0:
|
|
con_id = 48;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
rk_clrsetreg(&cru->clksel_con[con_id],
|
|
MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK,
|
|
mux | div);
|
|
|
|
return rk3368_mmc_get_clk(cru, clk_id);
|
|
}
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_TPL_BUILD)
|
|
static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate)
|
|
{
|
|
const struct pll_div *dpll_cfg = NULL;
|
|
const ulong MHz = 1000000;
|
|
|
|
/* Fout = ((Fin /NR) * NF )/ NO */
|
|
static const struct pll_div dpll_1200 = PLL_DIVISORS(1200 * MHz, 1, 1);
|
|
static const struct pll_div dpll_1332 = PLL_DIVISORS(1332 * MHz, 2, 1);
|
|
static const struct pll_div dpll_1600 = PLL_DIVISORS(1600 * MHz, 3, 2);
|
|
|
|
switch (set_rate) {
|
|
case 1200*MHz:
|
|
dpll_cfg = &dpll_1200;
|
|
break;
|
|
case 1332*MHz:
|
|
dpll_cfg = &dpll_1332;
|
|
break;
|
|
case 1600*MHz:
|
|
dpll_cfg = &dpll_1600;
|
|
break;
|
|
default:
|
|
pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
|
|
}
|
|
rkclk_set_pll(cru, DPLL, dpll_cfg);
|
|
|
|
return set_rate;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
|
|
static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru, ulong set_rate)
|
|
{
|
|
ulong ret;
|
|
|
|
/*
|
|
* The gmac clock can be derived either from an external clock
|
|
* or can be generated from internally by a divider from SCLK_MAC.
|
|
*/
|
|
if (readl(&cru->clksel_con[43]) & GMAC_MUX_SEL_EXTCLK) {
|
|
/* An external clock will always generate the right rate... */
|
|
ret = set_rate;
|
|
} else {
|
|
u32 con = readl(&cru->clksel_con[43]);
|
|
ulong pll_rate;
|
|
u8 div;
|
|
|
|
if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
|
|
GMAC_PLL_SELECT_GENERAL)
|
|
pll_rate = GPLL_HZ;
|
|
else if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
|
|
GMAC_PLL_SELECT_CODEC)
|
|
pll_rate = CPLL_HZ;
|
|
else
|
|
/* CPLL is not set */
|
|
return -EPERM;
|
|
|
|
div = DIV_ROUND_UP(pll_rate, set_rate) - 1;
|
|
if (div <= 0x1f)
|
|
rk_clrsetreg(&cru->clksel_con[43], GMAC_DIV_CON_MASK,
|
|
div << GMAC_DIV_CON_SHIFT);
|
|
else
|
|
debug("Unsupported div for gmac:%d\n", div);
|
|
|
|
return DIV_TO_RATE(pll_rate, div);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* RK3368 SPI clocks have a common divider-width (7 bits) and a single bit
|
|
* to select either CPLL or GPLL as the clock-parent. The location within
|
|
* the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
|
|
*/
|
|
|
|
struct spi_clkreg {
|
|
uint8_t reg; /* CLKSEL_CON[reg] register in CRU */
|
|
uint8_t div_shift;
|
|
uint8_t sel_shift;
|
|
};
|
|
|
|
/*
|
|
* The entries are numbered relative to their offset from SCLK_SPI0.
|
|
*/
|
|
static const struct spi_clkreg spi_clkregs[] = {
|
|
[0] = { .reg = 45, .div_shift = 0, .sel_shift = 7, },
|
|
[1] = { .reg = 45, .div_shift = 8, .sel_shift = 15, },
|
|
[2] = { .reg = 46, .div_shift = 8, .sel_shift = 15, },
|
|
};
|
|
|
|
static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
|
|
{
|
|
return (val >> shift) & ((1 << width) - 1);
|
|
}
|
|
|
|
static ulong rk3368_spi_get_clk(struct rk3368_cru *cru, ulong clk_id)
|
|
{
|
|
const struct spi_clkreg *spiclk = NULL;
|
|
u32 div, val;
|
|
|
|
switch (clk_id) {
|
|
case SCLK_SPI0 ... SCLK_SPI2:
|
|
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
|
|
break;
|
|
|
|
default:
|
|
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = readl(&cru->clksel_con[spiclk->reg]);
|
|
div = extract_bits(val, 7, spiclk->div_shift);
|
|
|
|
debug("%s: div 0x%x\n", __func__, div);
|
|
return DIV_TO_RATE(GPLL_HZ, div);
|
|
}
|
|
|
|
static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz)
|
|
{
|
|
const struct spi_clkreg *spiclk = NULL;
|
|
int src_clk_div;
|
|
|
|
src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
|
|
assert(src_clk_div < 127);
|
|
|
|
switch (clk_id) {
|
|
case SCLK_SPI0 ... SCLK_SPI2:
|
|
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
|
|
break;
|
|
|
|
default:
|
|
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rk_clrsetreg(&cru->clksel_con[spiclk->reg],
|
|
((0x7f << spiclk->div_shift) |
|
|
(0x1 << spiclk->sel_shift)),
|
|
((src_clk_div << spiclk->div_shift) |
|
|
(1 << spiclk->sel_shift)));
|
|
|
|
return rk3368_spi_get_clk(cru, clk_id);
|
|
}
|
|
|
|
static ulong rk3368_saradc_get_clk(struct rk3368_cru *cru)
|
|
{
|
|
u32 div, val;
|
|
|
|
val = readl(&cru->clksel_con[25]);
|
|
div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
|
|
CLK_SARADC_DIV_CON_WIDTH);
|
|
|
|
return DIV_TO_RATE(OSC_HZ, div);
|
|
}
|
|
|
|
static ulong rk3368_saradc_set_clk(struct rk3368_cru *cru, uint hz)
|
|
{
|
|
int src_clk_div;
|
|
|
|
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
|
|
assert(src_clk_div < 128);
|
|
|
|
rk_clrsetreg(&cru->clksel_con[25],
|
|
CLK_SARADC_DIV_CON_MASK,
|
|
src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
|
|
|
|
return rk3368_saradc_get_clk(cru);
|
|
}
|
|
|
|
static ulong rk3368_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong rate = 0;
|
|
|
|
debug("%s: id %ld\n", __func__, clk->id);
|
|
switch (clk->id) {
|
|
case PLL_CPLL:
|
|
rate = rkclk_pll_get_rate(priv->cru, CPLL);
|
|
break;
|
|
case PLL_GPLL:
|
|
rate = rkclk_pll_get_rate(priv->cru, GPLL);
|
|
break;
|
|
case SCLK_SPI0 ... SCLK_SPI2:
|
|
rate = rk3368_spi_get_clk(priv->cru, clk->id);
|
|
break;
|
|
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
|
|
case HCLK_SDMMC:
|
|
case HCLK_EMMC:
|
|
rate = rk3368_mmc_get_clk(priv->cru, clk->id);
|
|
break;
|
|
#endif
|
|
case SCLK_SARADC:
|
|
rate = rk3368_saradc_get_clk(priv->cru);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return rate;
|
|
}
|
|
|
|
static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
__maybe_unused struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong ret = 0;
|
|
|
|
debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate);
|
|
switch (clk->id) {
|
|
case SCLK_SPI0 ... SCLK_SPI2:
|
|
ret = rk3368_spi_set_clk(priv->cru, clk->id, rate);
|
|
break;
|
|
#if IS_ENABLED(CONFIG_TPL_BUILD)
|
|
case CLK_DDR:
|
|
ret = rk3368_ddr_set_clk(priv->cru, rate);
|
|
break;
|
|
#endif
|
|
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
|
|
case HCLK_SDMMC:
|
|
case HCLK_EMMC:
|
|
ret = rk3368_mmc_set_clk(clk, rate);
|
|
break;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
|
|
case SCLK_MAC:
|
|
/* select the external clock */
|
|
ret = rk3368_gmac_set_clk(priv->cru, rate);
|
|
break;
|
|
#endif
|
|
case SCLK_SARADC:
|
|
ret = rk3368_saradc_set_clk(priv->cru, rate);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused rk3368_gmac_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
|
|
struct rk3368_cru *cru = priv->cru;
|
|
const char *clock_output_name;
|
|
int ret;
|
|
|
|
/*
|
|
* If the requested parent is in the same clock-controller and
|
|
* the id is SCLK_MAC ("sclk_mac"), switch to the internal
|
|
* clock.
|
|
*/
|
|
if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) {
|
|
debug("%s: switching GAMC to SCLK_MAC\n", __func__);
|
|
rk_clrreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Otherwise, we need to check the clock-output-names of the
|
|
* requested parent to see if the requested id is "ext_gmac".
|
|
*/
|
|
ret = dev_read_string_index(parent->dev, "clock-output-names",
|
|
parent->id, &clock_output_name);
|
|
if (ret < 0)
|
|
return -ENODATA;
|
|
|
|
/* If this is "ext_gmac", switch to the external clock input */
|
|
if (!strcmp(clock_output_name, "ext_gmac")) {
|
|
debug("%s: switching GMAC to external clock\n", __func__);
|
|
rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int __maybe_unused rk3368_clk_set_parent(struct clk *clk, struct clk *parent)
|
|
{
|
|
switch (clk->id) {
|
|
case SCLK_MAC:
|
|
return rk3368_gmac_set_parent(clk, parent);
|
|
}
|
|
|
|
debug("%s: unsupported clk %ld\n", __func__, clk->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int rk3368_clk_enable(struct clk *clk)
|
|
{
|
|
switch (clk->id) {
|
|
case SCLK_MAC:
|
|
case SCLK_MAC_RX:
|
|
case SCLK_MAC_TX:
|
|
case SCLK_MACREF:
|
|
case SCLK_MACREF_OUT:
|
|
case ACLK_GMAC:
|
|
case PCLK_GMAC:
|
|
/* Required to successfully probe the Designware GMAC driver */
|
|
return 0;
|
|
}
|
|
|
|
debug("%s: unsupported clk %ld\n", __func__, clk->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
static struct clk_ops rk3368_clk_ops = {
|
|
.get_rate = rk3368_clk_get_rate,
|
|
.set_rate = rk3368_clk_set_rate,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.set_parent = rk3368_clk_set_parent,
|
|
#endif
|
|
.enable = rk3368_clk_enable,
|
|
};
|
|
|
|
static int rk3368_clk_probe(struct udevice *dev)
|
|
{
|
|
struct rk3368_clk_priv __maybe_unused *priv = dev_get_priv(dev);
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rk3368_clk_plat *plat = dev_get_platdata(dev);
|
|
|
|
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
|
|
#endif
|
|
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
|
|
rkclk_init(priv->cru);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3368_clk_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rk3368_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->cru = dev_read_addr_ptr(dev);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3368_clk_bind(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
struct udevice *sys_child;
|
|
struct sysreset_reg *priv;
|
|
|
|
/* The reset driver does not have a device node, so bind it here */
|
|
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
|
|
&sys_child);
|
|
if (ret) {
|
|
debug("Warning: No sysreset driver: ret=%d\n", ret);
|
|
} else {
|
|
priv = malloc(sizeof(struct sysreset_reg));
|
|
priv->glb_srst_fst_value = offsetof(struct rk3368_cru,
|
|
glb_srst_fst_val);
|
|
priv->glb_srst_snd_value = offsetof(struct rk3368_cru,
|
|
glb_srst_snd_val);
|
|
sys_child->priv = priv;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)
|
|
ret = offsetof(struct rk3368_cru, softrst_con[0]);
|
|
ret = rockchip_reset_bind(dev, ret, 15);
|
|
if (ret)
|
|
debug("Warning: software reset driver bind faile\n");
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct udevice_id rk3368_clk_ids[] = {
|
|
{ .compatible = "rockchip,rk3368-cru" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_rk3368_cru) = {
|
|
.name = "rockchip_rk3368_cru",
|
|
.id = UCLASS_CLK,
|
|
.of_match = rk3368_clk_ids,
|
|
.priv_auto_alloc_size = sizeof(struct rk3368_clk_priv),
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.platdata_auto_alloc_size = sizeof(struct rk3368_clk_plat),
|
|
#endif
|
|
.ofdata_to_platdata = rk3368_clk_ofdata_to_platdata,
|
|
.ops = &rk3368_clk_ops,
|
|
.bind = rk3368_clk_bind,
|
|
.probe = rk3368_clk_probe,
|
|
};
|