u-boot-brain/arch/arm/mach-sunxi/rsb.c
Alexander Graf e6e505b93c sunxi: Move cpu independent code to mach directory
Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while
most of it is just generic code that could as well be used on an AArch64 SoC.

Move all files that are not really tied to armv7 into a new mach-sunxi
directory.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01 09:52:28 +02:00

176 lines
3.9 KiB
C

/*
* (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
* Based on allwinner u-boot sources rsb code which is:
* (C) Copyright 2007-2013
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
* lixiang <lixiang@allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/prcm.h>
#include <asm/arch/rsb.h>
static int rsb_set_device_mode(void);
static void rsb_cfg_io(void)
{
#ifdef CONFIG_MACH_SUN8I
sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB);
sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB);
sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
#elif defined CONFIG_MACH_SUN9I
sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB);
sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB);
sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
#else
#error unsupported MACH_SUNXI
#endif
}
static void rsb_set_clk(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
u32 div = 0;
u32 cd_odly = 0;
/* Source is Hosc24M, set RSB clk to 3Mhz */
div = 24000000 / 3000000 / 2 - 1;
cd_odly = div >> 1;
if (!cd_odly)
cd_odly = 1;
writel((cd_odly << 8) | div, &rsb->ccr);
}
int rsb_init(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
/* Enable RSB and PIO clk, and de-assert their resets */
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
/* Setup external pins */
rsb_cfg_io();
writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
rsb_set_clk();
return rsb_set_device_mode();
}
static int rsb_await_trans(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
unsigned long tmo = timer_get_us() + 1000000;
u32 stat;
int ret;
while (1) {
stat = readl(&rsb->stat);
if (stat & RSB_STAT_LBSY_INT) {
ret = -EBUSY;
break;
}
if (stat & RSB_STAT_TERR_INT) {
ret = -EIO;
break;
}
if (stat & RSB_STAT_TOVER_INT) {
ret = 0;
break;
}
if (timer_get_us() > tmo) {
ret = -ETIME;
break;
}
}
writel(stat, &rsb->stat); /* Clear status bits */
return ret;
}
static int rsb_set_device_mode(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
unsigned long tmo = timer_get_us() + 1000000;
writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
&rsb->dmcr);
while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
if (timer_get_us() > tmo)
return -ETIME;
}
return rsb_await_trans();
}
static int rsb_do_trans(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
return rsb_await_trans();
}
int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
return rsb_do_trans();
}
int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
writel(reg_addr, &rsb->addr);
writel(data, &rsb->data);
writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
return rsb_do_trans();
}
int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
int ret;
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
writel(reg_addr, &rsb->addr);
writel(RSB_CMD_BYTE_READ, &rsb->cmd);
ret = rsb_do_trans();
if (ret)
return ret;
*data = readl(&rsb->data) & 0xff;
return 0;
}