mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
87 lines
2.4 KiB
C
87 lines
2.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Seco S.r.l
|
|
*
|
|
* Configuration settings for the Seco Boards.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#define CONFIG_BOARD_REVISION_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
|
|
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
|
|
|
|
/* MMC Configuration */
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
/* Ethernet Configuration */
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 6
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"ethprime=FEC0\0" \
|
|
"netdev=eth0\0" \
|
|
"ethprime=FEC0\0" \
|
|
"uboot=u-boot.bin\0" \
|
|
"kernel=uImage\0" \
|
|
"nfsroot=/opt/eldk/arm\0" \
|
|
"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
|
|
"ip_server=10.0.0.1\0" \
|
|
"nfs_path=/targetfs \0" \
|
|
"memory=mem=1024M\0" \
|
|
"bootdev=mmc dev 0; ext2load mmc 0:1\0" \
|
|
"root=root=/dev/mmcblk0p1\0" \
|
|
"option=rootwait rw fixrtc rootflags=barrier=1\0" \
|
|
"cpu_freq=arm_freq=996\0" \
|
|
"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
|
|
" ${option} ${memory} ${cpu_freq}\0" \
|
|
"setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
|
|
" root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
|
|
" nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
|
|
" ${memory} ${cpu_freq}\0" \
|
|
"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
|
|
"bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
|
|
" bootm 0x10800000\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0"
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment organization */
|
|
|
|
#if defined(CONFIG_ENV_IS_IN_MMC)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_DYNAMIC_MMC_DEVNO
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|