u-boot-brain/drivers/usb/host
Stephen Warren fc909c0563 usb: dwc2: fix bulk transfers
When I created wait_for_chhltd(), I noticed that some instances of the
code it replaced expected the ACK bit to be set and others didn't. I
assumed this was an accidental inconsistency in the code, so wrote
wait_for_chhltd() to always expect ACK to be set. This code appeared to
work correctly for both enumeration of USB keyboards and operation of
USB Ethernet devices. However, this change broke USB Mass Storage (at
least my USB SD card reader). This change reverts to exactly the
original behaviour. I'm not sure why the ACK bit isn't always set
(perhaps a quirk in the USB HW or DWC2 controller), but the code works
this way!

Fixes: 5be4ca7d6ac8 ("usb: dwc2: unify waiting for transfer completion")
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2015-04-14 05:47:59 +02:00
..
dwc2.c usb: dwc2: fix bulk transfers 2015-04-14 05:47:59 +02:00
dwc2.h usb: dwc2: Add driver for Synopsis DWC2 USB IP block 2014-10-22 22:01:58 +02:00
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c USB: ehci-atmel: use pcr to enable or disable clock 2014-09-19 00:11:21 +02:00
ehci-exynos.c dm: usb: Remove use of fdtdec GPIO support 2015-01-29 17:09:52 -07:00
ehci-faraday.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-fsl.c drivers: usb: fsl: Check USB Erratum A007792 applicability 2014-12-11 09:41:11 -08:00
ehci-hcd.c ehci-hcd: fix warnings on 64-bit builds 2015-04-14 05:47:47 +02:00
ehci-marvell.c arm: marvell: Move arch/kirkwood.h to arch/soc.h 2014-10-23 09:59:20 -04:00
ehci-mpc512x.c powerpc/usb:Differentiate USB controller base address 2013-10-24 09:35:09 -07:00
ehci-mx5.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mx6.c usb:ehci-mx6 add phy mode query function 2014-11-14 20:56:54 +01:00
ehci-mxc.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-mxs.c usb: ehci: mxs: Add board-specific callbacks 2014-09-29 09:02:16 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c usb: pci: Use pci_find_class() to find the device 2015-02-05 22:16:42 -07:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-rmobile.c usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT 2014-11-07 16:32:02 +01:00
ehci-spear.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-sunxi.c sunxi: Move usb-controller init code out of ehci-sunxi.c for reuse for otg 2015-01-14 14:56:40 +01:00
ehci-tegra.c usb: ehci-tegra: Build warning fixes for 64-bit 2015-04-14 05:47:48 +02:00
ehci-uniphier.c ARM: UniPhier: adjust device trees for business transfer 2015-03-15 13:37:00 +09:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-zynq.c ARM: zynq: ehci: Added USB host driver support 2014-05-14 07:43:35 +02:00
ehci.h usb: ehci: fix Interrupt on Doorbell flag of USBCMD 2014-11-07 16:32:02 +01:00
isp116x-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Kconfig usb: UniPhier: add UniPhier on-chip xHCI host driver support 2015-03-01 00:03:00 +09:00
Makefile usb: UniPhier: add UniPhier on-chip xHCI host driver support 2015-03-01 00:03:00 +09:00
ohci-at91.c USB: ohci-at91: use pcr to enable or disable clock 2014-09-19 00:11:20 +02:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-ep93xx.c arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
ohci-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
ohci-s3c24xx.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci.h usb: new board-specific USB init interface 2013-10-20 23:42:40 +02:00
r8a66597-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
r8a66597.h usb: r8a66597: Fix argument mistake of inl 2011-08-08 21:40:40 +02:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-exynos5.c exynos: usb: make dwc3_set_mode to static 2015-02-24 18:54:03 +01:00
xhci-keystone.c keystone: usb: add support of usb xhci 2014-10-23 11:27:04 -04:00
xhci-mem.c usb: 64-bit architectures support for xHCI 2015-04-14 05:47:48 +02:00
xhci-omap.c usb: host: xhci: make sure to power up PHY 2014-07-09 22:11:51 +02:00
xhci-pci.c usb: pci: Add XHCI driver for PCI 2015-02-05 22:16:42 -07:00
xhci-ring.c usb: 64-bit architectures support for xHCI 2015-04-14 05:47:48 +02:00
xhci-uniphier.c ARM: UniPhier: adjust device trees for business transfer 2015-03-15 13:37:00 +09:00
xhci.c usb: 64-bit architectures support for xHCI 2015-04-14 05:47:48 +02:00
xhci.h usb: 64-bit architectures support for xHCI 2015-04-14 05:47:48 +02:00