mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
This patch adds support for the new AMCC Acadia eval board. Please note that this Acadia/405EZ support is still in a beta stage. Still lot's of cleanup needed but we need a preliminary release now. Signed-off-by: Stefan Roese <sr@denx.de>
153 lines
4.1 KiB
C
153 lines
4.1 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
|
|
extern void board_pll_init_f(void);
|
|
|
|
/* Some specific Acadia Defines */
|
|
#define CPLD_BASE 0x80000000
|
|
|
|
void liveoak_gpio_init(void)
|
|
{
|
|
/*
|
|
* GPIO0 setup (select GPIO or alternate function)
|
|
*/
|
|
out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
|
|
out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
|
|
out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
|
|
out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
|
|
out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
|
|
out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
|
|
out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
|
|
|
|
/*
|
|
* Ultra (405EZ) was nice enough to add another GPIO controller
|
|
*/
|
|
out32(GPIO1_OSRH, CFG_GPIO1_OSRH); /* output select */
|
|
out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
|
|
out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H); /* input select */
|
|
out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
|
|
out32(GPIO1_TSRH, CFG_GPIO1_TSRH); /* three-state select */
|
|
out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
|
|
out32(GPIO1_TCR, CFG_GPIO1_TCR); /* enable output driver for outputs */
|
|
}
|
|
|
|
#if 0 /* test-only: not called at all??? */
|
|
void ext_bus_cntlr_init(void)
|
|
{
|
|
#if (defined(EBC_PB4AP) && defined(EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
|
|
mtebc(pb4ap, EBC_PB4AP);
|
|
mtebc(pb4cr, EBC_PB4CR);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
#if 0 /* test-only */
|
|
/*
|
|
* If CRAM memory and SPI/NAND boot, and if the CRAM memory is
|
|
* already initialized by the pre-loader then we can't reinitialize
|
|
* CPR registers, GPIO registers and EBC registers as this will
|
|
* have the effect of un-initializing CRAM.
|
|
*/
|
|
spr_reg = (volatile unsigned long) mfspr(SPRG7);
|
|
if (spr_reg != LOAK_CRAM) { /* != CRAM */
|
|
board_pll_init_f();
|
|
liveoak_gpio_init();
|
|
ext_bus_cntlr_init();
|
|
|
|
mtebc(pb1ap, CFG_EBC_PB1AP);
|
|
mtebc(pb1cr, CFG_EBC_PB1CR);
|
|
|
|
mtebc(pb2ap, CFG_EBC_PB2AP);
|
|
mtebc(pb2cr, CFG_EBC_PB2CR);
|
|
}
|
|
#else
|
|
board_pll_init_f();
|
|
liveoak_gpio_init();
|
|
/* ext_bus_cntlr_init(); */
|
|
#endif
|
|
|
|
#if 0 /* test-only (orig) */
|
|
/*
|
|
* If we boot from NAND Flash, we are running in
|
|
* RAM, so disable the EBC_CS0 so that it goes back
|
|
* to the NOR Flash. It will be enabled later
|
|
* for the NAND Flash on EBC_CS1
|
|
*/
|
|
mfsdr(sdrultra0, reg);
|
|
mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
|
|
#endif
|
|
#if 0 /* test-only */
|
|
/* configure for NAND */
|
|
mfsdr(sdrultra0, reg);
|
|
reg &= ~SDR_ULTRA0_CSN_MASK;
|
|
reg |= SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS;
|
|
mtsdr(sdrultra0, reg & ~SDR_ULTRA0_CSNSEL0);
|
|
#endif
|
|
|
|
/* USB Host core needs this bit set */
|
|
mfsdr(sdrultra1, reg);
|
|
mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
|
|
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(uicer, 0x00000000); /* disable all ints */
|
|
mtdcr(uiccr, 0x00000010);
|
|
mtdcr(uicpr, 0xFE7FFFF0); /* set int polarities */
|
|
mtdcr(uictr, 0x00000010); /* set int trigger levels */
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_f(void)
|
|
{
|
|
/* Set EPLD to take PHY out of reset */
|
|
out8(CPLD_BASE + 0x05, 0x00);
|
|
udelay(100000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|