u-boot-brain/arch/arm/mach-omap2/am33xx/sys_info.c
Lokesh Vutla fbd6295da4 arm: am33xx: Add support for mulitiple PLL input frequencies
am335x supports various sysclk frequencies which can be determined
using sysboot pins. PLLs should be configures based on this
sysclk frequency. Add PLL configurations for all supported
frequencies.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-12 08:37:14 -04:00

210 lines
4.1 KiB
C

/*
* sys_info.c
*
* System information functions
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
*
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <power/tps65910.h>
#include <linux/compiler.h>
struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
/**
* get_cpu_rev(void) - extract rev info
*/
u32 get_cpu_rev(void)
{
u32 id;
u32 rev;
id = readl(DEVICE_ID);
rev = (id >> 28) & 0xff;
return rev;
}
/**
* get_cpu_type(void) - extract cpu info
*/
u32 get_cpu_type(void)
{
u32 id = 0;
u32 partnum;
id = readl(DEVICE_ID);
partnum = (id >> 12) & 0xffff;
return partnum;
}
/**
* get_device_type(): tell if GP/HS/EMU/TST
*/
u32 get_device_type(void)
{
int mode;
mode = readl(&cstat->statusreg) & (DEVICE_MASK);
return mode >>= 8;
}
/**
* get_sysboot_value(void) - return SYS_BOOT[4:0]
*/
u32 get_sysboot_value(void)
{
return readl(&cstat->statusreg) & SYSBOOT_MASK;
}
u32 get_sys_clk_index(void)
{
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
u32 ind = readl(&ctrl->statusreg);
#ifdef CONFIG_AM43XX
u32 src;
src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT;
if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */
return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >>
CTRL_CRYSTAL_FREQ_SELECTION_SHIFT);
else /* Value read from SYS BOOT pins */
#endif
return ((ind & CTRL_SYSBOOT_15_14_MASK) >>
CTRL_SYSBOOT_15_14_SHIFT);
}
#ifdef CONFIG_DISPLAY_CPUINFO
static char *cpu_revs[] = {
"1.0",
"2.0",
"2.1"};
static char *cpu_revs_am43xx[] = {
"1.0",
"1.1",
"1.2"};
static char *dev_types[] = {
"TST",
"EMU",
"HS",
"GP"};
/**
* Print CPU information
*/
int print_cpuinfo(void)
{
char *cpu_s, *sec_s, *rev_s;
char **cpu_rev_arr = cpu_revs;
switch (get_cpu_type()) {
case AM335X:
cpu_s = "AM335X";
break;
case TI81XX:
cpu_s = "TI81XX";
break;
case AM437X:
cpu_s = "AM437X";
cpu_rev_arr = cpu_revs_am43xx;
break;
default:
cpu_s = "Unknown CPU type";
break;
}
if (get_cpu_rev() < ARRAY_SIZE(cpu_revs))
rev_s = cpu_rev_arr[get_cpu_rev()];
else
rev_s = "?";
if (get_device_type() < ARRAY_SIZE(dev_types))
sec_s = dev_types[get_device_type()];
else
sec_s = "?";
printf("CPU : %s-%s rev %s\n", cpu_s, sec_s, rev_s);
return 0;
}
#endif /* CONFIG_DISPLAY_CPUINFO */
#ifdef CONFIG_AM33XX
int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
{
int sil_rev;
sil_rev = readl(&cdev->deviceid) >> 28;
if (sil_rev == 0) {
/* No efuse in PG 1.0. Use max speed */
return MPUPLL_M_720;
} else if (sil_rev >= 1) {
/* Check what the efuse says our max speed is. */
int efuse_arm_mpu_max_freq, package_type;
efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
package_type = (efuse_arm_mpu_max_freq & PACKAGE_TYPE_MASK) >>
PACKAGE_TYPE_SHIFT;
/* PG 2.0, efuse may not be set. */
if (package_type == PACKAGE_TYPE_UNDEFINED || package_type ==
PACKAGE_TYPE_RESERVED)
return MPUPLL_M_800;
switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
case AM335X_ZCZ_1000:
return MPUPLL_M_1000;
case AM335X_ZCZ_800:
return MPUPLL_M_800;
case AM335X_ZCZ_720:
return MPUPLL_M_720;
case AM335X_ZCZ_600:
case AM335X_ZCE_600:
return MPUPLL_M_600;
case AM335X_ZCZ_300:
case AM335X_ZCE_300:
return MPUPLL_M_300;
}
}
/* unknown, use the PG1.0 max */
return MPUPLL_M_720;
}
int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
{
/* For PG2.0 and later, we have one set of values. */
if (sil_rev >= 1) {
switch (frequency) {
case MPUPLL_M_1000:
return TPS65910_OP_REG_SEL_1_3_2_5;
case MPUPLL_M_800:
return TPS65910_OP_REG_SEL_1_2_6;
case MPUPLL_M_720:
return TPS65910_OP_REG_SEL_1_2_0;
case MPUPLL_M_600:
case MPUPLL_M_500:
case MPUPLL_M_300:
return TPS65910_OP_REG_SEL_1_1_0;
}
}
/* Default to PG1.0 values. */
return TPS65910_OP_REG_SEL_1_2_6;
}
#endif