mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-12 22:26:16 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
187 lines
3.7 KiB
Plaintext
187 lines
3.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/bcm6318-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/power-domain/bcm6318-power-domain.h>
|
|
#include <dt-bindings/reset/bcm6318-reset.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,bcm6318";
|
|
|
|
aliases {
|
|
spi0 = &spi;
|
|
};
|
|
|
|
cpus {
|
|
reg = <0x10000000 0x4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bcm6318-cpu", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
hsspi_pll: hsspi-pll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <250000000>;
|
|
};
|
|
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
periph_clk: periph-clk {
|
|
compatible = "brcm,bcm6345-clk";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
ubus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
wdt: watchdog@10000068 {
|
|
compatible = "brcm,bcm6345-wdt";
|
|
reg = <0x10000068 0xc>;
|
|
clocks = <&periph_osc>;
|
|
};
|
|
|
|
wdt-reboot {
|
|
compatible = "wdt-reboot";
|
|
wdt = <&wdt>;
|
|
};
|
|
|
|
pll_cntl: syscon@10000074 {
|
|
compatible = "syscon";
|
|
reg = <0x10000074 0x4>;
|
|
};
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pll_cntl>;
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
gpio1: gpio-controller@10000080 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg = <0x10000080 0x4>, <0x10000088 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpios = <18>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio-controller@10000084 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg = <0x10000084 0x4>, <0x1000008c 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
clocks = <&periph_osc>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
leds: led-controller@10000200 {
|
|
compatible = "brcm,bcm6328-leds";
|
|
reg = <0x10000200 0x28>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
periph_pwr: power-controller@100008e8 {
|
|
compatible = "brcm,bcm6328-power-domain";
|
|
reg = <0x100008e8 0x4>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
spi: spi@10003000 {
|
|
compatible = "brcm,bcm6328-hsspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x10003000 0x600>;
|
|
clocks = <&periph_clk BCM6318_CLK_HSSPI>, <&hsspi_pll>;
|
|
clock-names = "hsspi", "pll";
|
|
resets = <&periph_rst BCM6318_RST_SPI>;
|
|
spi-max-frequency = <33333334>;
|
|
num-cs = <3>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
memory-controller@10004000 {
|
|
compatible = "brcm,bcm6318-mc";
|
|
reg = <0x10004000 0x38>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
ehci: usb-controller@10005000 {
|
|
compatible = "brcm,bcm6318-ehci", "generic-ehci";
|
|
reg = <0x10005000 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb-controller@10005100 {
|
|
compatible = "brcm,bcm6318-ohci", "generic-ohci";
|
|
reg = <0x10005100 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10005200 {
|
|
compatible = "brcm,bcm6318-usbh";
|
|
reg = <0x10005200 0x30>;
|
|
#phy-cells = <0>;
|
|
clocks = <&periph_clk BCM6318_CLK_USB>;
|
|
clock-names = "usbh";
|
|
power-domains = <&periph_pwr BCM6318_PWR_USB>;
|
|
resets = <&periph_rst BCM6318_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|