mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Max Krummenacher](/assets/img/avatar_default.png)
This adds board support for the Toradex module family Colibri iMX6. The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both with a version for commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
1131 lines
31 KiB
C
1131 lines
31 KiB
C
/*
|
|
* Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
|
|
* Copyright (C) 2014-2016, Toradex AG
|
|
* copied from nitrogen6x
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/bootm.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
#include <asm/imx-common/mxc_i2c.h>
|
|
#include <asm/imx-common/sata.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
#include <asm/imx-common/video.h>
|
|
#include <asm/io.h>
|
|
#include <dm/platform_data/serial_mxc.h>
|
|
#include <dm/platdata.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <i2c.h>
|
|
#include <imx_thermal.h>
|
|
#include <linux/errno.h>
|
|
#include <malloc.h>
|
|
#include <micrel.h>
|
|
#include <miiphy.h>
|
|
#include <mmc.h>
|
|
#include <netdev.h>
|
|
|
|
#include "../common/tdx-cfg-block.h"
|
|
#ifdef CONFIG_TDX_CMD_IMX_MFGR
|
|
#include "pf0100.h"
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_SRE_SLOW)
|
|
|
|
#define NO_PULLUP ( \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_SRE_SLOW)
|
|
|
|
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
|
|
|
|
#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
|
|
|
|
#define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST)
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* use the DDR controllers configured size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
(ulong)imx_ddr_size());
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Colibri UARTA */
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
|
/* Colibri I2C */
|
|
struct i2c_pads_info i2c_pad_info1 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
};
|
|
|
|
/* Colibri local, PMIC, SGTL5000, STMPE811 */
|
|
struct i2c_pads_info i2c_pad_info_loc = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
|
|
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
|
|
.gp = IMX_GPIO_NR(2, 30)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
|
|
.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
|
|
.gp = IMX_GPIO_NR(3, 16)
|
|
}
|
|
};
|
|
|
|
/* Apalis MMC */
|
|
iomux_v3_cfg_t const usdhc1_pads[] = {
|
|
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
|
|
# define GPIO_MMC_CD IMX_GPIO_NR(2, 5)
|
|
};
|
|
|
|
/* eMMC */
|
|
iomux_v3_cfg_t const usdhc3_pads[] = {
|
|
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads[] = {
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
|
}
|
|
|
|
/* mux auxiliary pins to GPIO, so they can be used from the U-Boot cmdline */
|
|
iomux_v3_cfg_t const gpio_pads[] = {
|
|
/* ADDRESS[17:18] [25] used as GPIO */
|
|
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D1__GPIO2_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* ADDRESS[19:24] used as GPIO */
|
|
MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT22__GPIO5_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT21__GPIO5_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT20__GPIO5_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT19__GPIO5_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT18__GPIO5_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* DATA[16:29] [31] used as GPIO */
|
|
MX6_PAD_EIM_LBA__GPIO2_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CLE__GPIO6_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* DQM[0:3] used as GPIO */
|
|
MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* RDY used as GPIO */
|
|
MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* ADDRESS[16] DATA[30] used as GPIO */
|
|
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(WEAK_PULLDOWN),
|
|
MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* CSI pins used as GPIO */
|
|
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D18__GPIO3_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(WEAK_PULLDOWN),
|
|
MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A18__GPIO2_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_EB3__GPIO2_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D17__GPIO3_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* GPIO */
|
|
MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_ENET_REF_CLK__GPIO1_IO23 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBH_OC */
|
|
MX6_PAD_EIM_D30__GPIO3_IO30 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBC_ID */
|
|
MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBC_DET */
|
|
MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
};
|
|
|
|
static void setup_iomux_gpio(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
|
}
|
|
|
|
iomux_v3_cfg_t const usb_pads[] = {
|
|
/* USB_PE */
|
|
MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
# define GPIO_USBH_EN IMX_GPIO_NR(3, 31)
|
|
};
|
|
|
|
/*
|
|
* UARTs are used in DTE mode, switch the mode on all UARTs before
|
|
* any pinmuxing connects a (DCE) output to a transceiver output.
|
|
*/
|
|
#define UFCR 0x90 /* FIFO Control Register */
|
|
#define UFCR_DCEDTE (1<<6) /* DCE=0 */
|
|
|
|
static void setup_dtemode_uart(void)
|
|
{
|
|
setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
|
|
setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
|
|
setbits_le32((u32 *)(UART3_BASE + UFCR), UFCR_DCEDTE);
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
setup_dtemode_uart();
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
switch (port) {
|
|
case 0:
|
|
/* control OTG power */
|
|
/* No special PE for USBC, always on when ID pin signals
|
|
host mode */
|
|
break;
|
|
case 1:
|
|
/* Control MXM USBH */
|
|
/* Set MXM USBH power enable, '0' means on */
|
|
gpio_direction_output(GPIO_USBH_EN, !on);
|
|
mdelay(100);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
/* use the following sequence: eMMC, MMC */
|
|
struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
|
|
{USDHC3_BASE_ADDR},
|
|
{USDHC1_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret = true; /* default: assume inserted */
|
|
|
|
switch (cfg->esdhc_base) {
|
|
case USDHC1_BASE_ADDR:
|
|
gpio_direction_input(GPIO_MMC_CD);
|
|
ret = !gpio_get_value(GPIO_MMC_CD);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
s32 status = 0;
|
|
u32 index = 0;
|
|
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
|
|
usdhc_cfg[0].max_bus_width = 8;
|
|
usdhc_cfg[1].max_bus_width = 4;
|
|
|
|
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
|
|
switch (index) {
|
|
case 0:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
|
break;
|
|
case 1:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
|
|
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
|
|
return status;
|
|
}
|
|
|
|
status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
|
|
}
|
|
|
|
return status;
|
|
#else
|
|
struct src *psrc = (struct src *)SRC_BASE_ADDR;
|
|
unsigned reg = readl(&psrc->sbmr1) >> 11;
|
|
/*
|
|
* Upon reading BOOT_CFG register the following map is done:
|
|
* Bit 11 and 12 of BOOT_CFG register can determine the current
|
|
* mmc port
|
|
* 0x1 SD1
|
|
* 0x2 SD2
|
|
* 0x3 SD4
|
|
*/
|
|
|
|
switch (reg & 0x3) {
|
|
case 0x0:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
|
usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
|
|
break;
|
|
case 0x2:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
|
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
|
|
break;
|
|
default:
|
|
puts("MMC boot device not available");
|
|
}
|
|
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
uint32_t base = IMX_FEC_BASE;
|
|
struct mii_dev *bus = NULL;
|
|
struct phy_device *phydev = NULL;
|
|
int ret;
|
|
|
|
/* provide the PHY clock from the i.MX 6 */
|
|
ret = enable_fec_anatop_clock(0, ENET_50MHZ);
|
|
if (ret)
|
|
return ret;
|
|
/* set gpr1[ENET_CLK_SEL] */
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
|
|
|
setup_iomux_enet();
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
bus = fec_get_miibus(base, -1);
|
|
if (!bus)
|
|
return 0;
|
|
/* scan PHY 1..7 */
|
|
phydev = phy_find_by_mask(bus, 0xff, PHY_INTERFACE_MODE_RMII);
|
|
if (!phydev) {
|
|
free(bus);
|
|
puts("no PHY found\n");
|
|
return 0;
|
|
}
|
|
phy_reset(phydev);
|
|
printf("using PHY at %d\n", phydev->addr);
|
|
ret = fec_probe(bis, -1, base, bus, phydev);
|
|
if (ret) {
|
|
printf("FEC MXC: %s:failed\n", __func__);
|
|
free(phydev);
|
|
free(bus);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const pwr_intb_pads[] = {
|
|
/*
|
|
* the bootrom sets the iomux to vselect, potentially connecting
|
|
* two outputs. Set this back to GPIO
|
|
*/
|
|
MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)
|
|
};
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
|
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
|
/* Backlight On */
|
|
MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 26)
|
|
/* Backlight PWM, used as GPIO in U-Boot */
|
|
MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PULLUP),
|
|
MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 9)
|
|
};
|
|
|
|
static iomux_v3_cfg_t const rgb_pads[] = {
|
|
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
};
|
|
|
|
static void do_enable_hdmi(struct display_info_t const *dev)
|
|
{
|
|
imx_enable_hdmi_phy();
|
|
}
|
|
|
|
static void enable_rgb(struct display_info_t const *dev)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
rgb_pads,
|
|
ARRAY_SIZE(rgb_pads));
|
|
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
|
|
gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
|
|
}
|
|
|
|
static int detect_default(struct display_info_t const *dev)
|
|
{
|
|
(void) dev;
|
|
return 1;
|
|
}
|
|
|
|
struct display_info_t const displays[] = {{
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = detect_hdmi,
|
|
.enable = do_enable_hdmi,
|
|
.mode = {
|
|
.name = "HDMI",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = detect_default,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "vga-rgb",
|
|
.refresh = 60,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.pixclock = 33000,
|
|
.left_margin = 48,
|
|
.right_margin = 16,
|
|
.upper_margin = 31,
|
|
.lower_margin = 11,
|
|
.hsync_len = 96,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "wvga-rgb",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 25000,
|
|
.left_margin = 40,
|
|
.right_margin = 88,
|
|
.upper_margin = 33,
|
|
.lower_margin = 10,
|
|
.hsync_len = 128,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} } };
|
|
size_t display_count = ARRAY_SIZE(displays);
|
|
|
|
static void setup_display(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
int reg;
|
|
|
|
enable_ipu_clock();
|
|
imx_setup_hdmi();
|
|
/* Turn on LDB0,IPU,IPU DI0 clocks */
|
|
reg = __raw_readl(&mxc_ccm->CCGR3);
|
|
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
|
|
writel(reg, &mxc_ccm->CCGR3);
|
|
|
|
/* set LDB0, LDB1 clk select to 011/011 */
|
|
reg = readl(&mxc_ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|
|
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->cs2cdr);
|
|
|
|
reg = readl(&mxc_ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
|
|
writel(reg, &mxc_ccm->cscmr2);
|
|
|
|
reg = readl(&mxc_ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
|
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
|
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|
|
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|
|
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
|
|
|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
|
|
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
|
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
|
|
/* backlight unconditionally on for now */
|
|
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
|
ARRAY_SIZE(backlight_pads));
|
|
/* use 0 for EDT 7", use 1 for LG fullHD panel */
|
|
gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
|
|
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
|
|
}
|
|
#endif /* defined(CONFIG_VIDEO_IPUV3) */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
|
|
ARRAY_SIZE(pwr_intb_pads));
|
|
setup_iomux_uart();
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
setup_display();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Do not overwrite the console
|
|
* Use always serial for U-Boot console
|
|
*/
|
|
int overwrite_console(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
|
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
|
|
|
|
#ifdef CONFIG_TDX_CMD_IMX_MFGR
|
|
(void) pmic_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_SATA
|
|
setup_sata();
|
|
#endif
|
|
|
|
setup_iomux_gpio();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#if defined(CONFIG_REVISION_TAG) && \
|
|
defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
|
|
char env_str[256];
|
|
u32 rev;
|
|
|
|
rev = get_board_rev();
|
|
snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
|
|
setenv("board_rev", env_str);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP)
|
|
int ft_system_setup(void *blob, bd_t *bd)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
char it[] = " IT";
|
|
int minc, maxc;
|
|
|
|
switch (get_cpu_temp_grade(&minc, &maxc)) {
|
|
case TEMP_AUTOMOTIVE:
|
|
case TEMP_INDUSTRIAL:
|
|
break;
|
|
case TEMP_EXTCOMMERCIAL:
|
|
default:
|
|
it[0] = 0;
|
|
};
|
|
printf("Model: Toradex Colibri iMX6 %s %sMB%s\n",
|
|
is_cpu_type(MXC_CPU_MX6DL) ? "DualLite" : "Solo",
|
|
(gd->ram_size == 0x20000000) ? "512" : "256", it);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
return ft_common_board_setup(blob, bd);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
{"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_LDO_BYPASS_CHECK
|
|
/* TODO, use external pmic, for now always ldo_enable */
|
|
void ldo_mode_set(int ldo_bypass)
|
|
{
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#include <spl.h>
|
|
#include <libfdt.h>
|
|
#include "asm/arch/mx6dl-ddr.h"
|
|
#include "asm/arch/iomux.h"
|
|
#include "asm/arch/crm_regs.h"
|
|
|
|
static int mx6s_dcd_table[] = {
|
|
/* ddr-setup.cfg */
|
|
|
|
MX6_IOM_DRAM_SDQS0, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS1, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS2, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS3, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS4, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS5, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS6, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS7, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B0DS, 0x00000030,
|
|
MX6_IOM_GRP_B1DS, 0x00000030,
|
|
MX6_IOM_GRP_B2DS, 0x00000030,
|
|
MX6_IOM_GRP_B3DS, 0x00000030,
|
|
MX6_IOM_GRP_B4DS, 0x00000030,
|
|
MX6_IOM_GRP_B5DS, 0x00000030,
|
|
MX6_IOM_GRP_B6DS, 0x00000030,
|
|
MX6_IOM_GRP_B7DS, 0x00000030,
|
|
MX6_IOM_GRP_ADDDS, 0x00000030,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_CTLDS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM0, 0x00020030,
|
|
MX6_IOM_DRAM_DQM1, 0x00020030,
|
|
MX6_IOM_DRAM_DQM2, 0x00020030,
|
|
MX6_IOM_DRAM_DQM3, 0x00020030,
|
|
MX6_IOM_DRAM_DQM4, 0x00020030,
|
|
MX6_IOM_DRAM_DQM5, 0x00020030,
|
|
MX6_IOM_DRAM_DQM6, 0x00020030,
|
|
MX6_IOM_DRAM_DQM7, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_CAS, 0x00020030,
|
|
MX6_IOM_DRAM_RAS, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_0, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_1, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_RESET, 0x00020030,
|
|
MX6_IOM_DRAM_SDCKE0, 0x00003000,
|
|
MX6_IOM_DRAM_SDCKE1, 0x00003000,
|
|
|
|
MX6_IOM_DRAM_SDODT0, 0x00003030,
|
|
MX6_IOM_DRAM_SDODT1, 0x00003030,
|
|
|
|
/* (differential input) */
|
|
MX6_IOM_DDRMODE_CTL, 0x00020000,
|
|
/* (differential input) */
|
|
MX6_IOM_GRP_DDRMODE, 0x00020000,
|
|
/* disable ddr pullups */
|
|
MX6_IOM_GRP_DDRPKE, 0x00000000,
|
|
MX6_IOM_DRAM_SDBA2, 0x00000000,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
|
|
|
|
/* Read data DQ Byte0-3 delay */
|
|
MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
|
|
|
|
/*
|
|
* MDMISC mirroring interleaved (row/bank/col)
|
|
*/
|
|
/* TODO: check what the RALAT field does */
|
|
MX6_MMDC_P0_MDMISC, 0x00081740,
|
|
|
|
/*
|
|
* MDSCR con_req
|
|
*/
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
|
|
/* 800mhz_2x64mx16.cfg */
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x0002002D,
|
|
MX6_MMDC_P0_MDCFG0, 0x2C305503,
|
|
MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
|
|
MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
|
|
MX6_MMDC_P0_MDRWD, 0x000026D2,
|
|
MX6_MMDC_P0_MDOR, 0x00301023,
|
|
MX6_MMDC_P0_MDOTC, 0x00333030,
|
|
MX6_MMDC_P0_MDPDC, 0x0002556D,
|
|
/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
|
|
MX6_MMDC_P0_MDASP, 0x00000017,
|
|
/* DDR3 DATA BUS SIZE: 64BIT */
|
|
/* MX6_MMDC_P0_MDCTL, 0x821A0000, */
|
|
/* DDR3 DATA BUS SIZE: 32BIT */
|
|
MX6_MMDC_P0_MDCTL, 0x82190000,
|
|
|
|
/* Write commands to DDR */
|
|
/* Load Mode Registers */
|
|
/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
|
|
/* MX6_MMDC_P0_MDSCR, 0x04408032, */
|
|
MX6_MMDC_P0_MDSCR, 0x04008032,
|
|
MX6_MMDC_P0_MDSCR, 0x00008033,
|
|
MX6_MMDC_P0_MDSCR, 0x00048031,
|
|
MX6_MMDC_P0_MDSCR, 0x13208030,
|
|
/* ZQ calibration */
|
|
MX6_MMDC_P0_MDSCR, 0x04008040,
|
|
|
|
MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P0_MDREF, 0x00005800,
|
|
|
|
MX6_MMDC_P0_MPODTCTRL, 0x00000000,
|
|
MX6_MMDC_P1_MPODTCTRL, 0x00000000,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
|
|
MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
|
|
MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
|
|
MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
|
|
|
|
MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
|
|
MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
|
|
MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
|
|
MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
|
|
MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
|
|
MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
|
|
MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
|
|
|
|
MX6_MMDC_P0_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P1_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P0_MDSCR, 0x00000000,
|
|
MX6_MMDC_P0_MAPSR, 0x00011006,
|
|
};
|
|
|
|
static int mx6dl_dcd_table[] = {
|
|
/* ddr-setup.cfg */
|
|
|
|
MX6_IOM_DRAM_SDQS0, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS1, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS2, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS3, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS4, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS5, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS6, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS7, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B0DS, 0x00000030,
|
|
MX6_IOM_GRP_B1DS, 0x00000030,
|
|
MX6_IOM_GRP_B2DS, 0x00000030,
|
|
MX6_IOM_GRP_B3DS, 0x00000030,
|
|
MX6_IOM_GRP_B4DS, 0x00000030,
|
|
MX6_IOM_GRP_B5DS, 0x00000030,
|
|
MX6_IOM_GRP_B6DS, 0x00000030,
|
|
MX6_IOM_GRP_B7DS, 0x00000030,
|
|
MX6_IOM_GRP_ADDDS, 0x00000030,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_CTLDS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM0, 0x00020030,
|
|
MX6_IOM_DRAM_DQM1, 0x00020030,
|
|
MX6_IOM_DRAM_DQM2, 0x00020030,
|
|
MX6_IOM_DRAM_DQM3, 0x00020030,
|
|
MX6_IOM_DRAM_DQM4, 0x00020030,
|
|
MX6_IOM_DRAM_DQM5, 0x00020030,
|
|
MX6_IOM_DRAM_DQM6, 0x00020030,
|
|
MX6_IOM_DRAM_DQM7, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_CAS, 0x00020030,
|
|
MX6_IOM_DRAM_RAS, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_0, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_1, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_RESET, 0x00020030,
|
|
MX6_IOM_DRAM_SDCKE0, 0x00003000,
|
|
MX6_IOM_DRAM_SDCKE1, 0x00003000,
|
|
|
|
MX6_IOM_DRAM_SDODT0, 0x00003030,
|
|
MX6_IOM_DRAM_SDODT1, 0x00003030,
|
|
|
|
/* (differential input) */
|
|
MX6_IOM_DDRMODE_CTL, 0x00020000,
|
|
/* (differential input) */
|
|
MX6_IOM_GRP_DDRMODE, 0x00020000,
|
|
/* disable ddr pullups */
|
|
MX6_IOM_GRP_DDRPKE, 0x00000000,
|
|
MX6_IOM_DRAM_SDBA2, 0x00000000,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
|
|
|
|
/* Read data DQ Byte0-3 delay */
|
|
MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
|
|
|
|
/*
|
|
* MDMISC mirroring interleaved (row/bank/col)
|
|
*/
|
|
/* TODO: check what the RALAT field does */
|
|
MX6_MMDC_P0_MDMISC, 0x00081740,
|
|
|
|
/*
|
|
* MDSCR con_req
|
|
*/
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
|
|
/* 800mhz_2x64mx16.cfg */
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x0002002D,
|
|
MX6_MMDC_P0_MDCFG0, 0x2C305503,
|
|
MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
|
|
MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
|
|
MX6_MMDC_P0_MDRWD, 0x000026D2,
|
|
MX6_MMDC_P0_MDOR, 0x00301023,
|
|
MX6_MMDC_P0_MDOTC, 0x00333030,
|
|
MX6_MMDC_P0_MDPDC, 0x0002556D,
|
|
/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
|
|
MX6_MMDC_P0_MDASP, 0x00000017,
|
|
/* DDR3 DATA BUS SIZE: 64BIT */
|
|
MX6_MMDC_P0_MDCTL, 0x821A0000,
|
|
/* DDR3 DATA BUS SIZE: 32BIT */
|
|
/* MX6_MMDC_P0_MDCTL, 0x82190000, */
|
|
|
|
/* Write commands to DDR */
|
|
/* Load Mode Registers */
|
|
/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
|
|
/* MX6_MMDC_P0_MDSCR, 0x04408032, */
|
|
MX6_MMDC_P0_MDSCR, 0x04008032,
|
|
MX6_MMDC_P0_MDSCR, 0x00008033,
|
|
MX6_MMDC_P0_MDSCR, 0x00048031,
|
|
MX6_MMDC_P0_MDSCR, 0x13208030,
|
|
/* ZQ calibration */
|
|
MX6_MMDC_P0_MDSCR, 0x04008040,
|
|
|
|
MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P0_MDREF, 0x00005800,
|
|
|
|
MX6_MMDC_P0_MPODTCTRL, 0x00000000,
|
|
MX6_MMDC_P1_MPODTCTRL, 0x00000000,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
|
|
MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
|
|
MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
|
|
MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
|
|
|
|
MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
|
|
MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
|
|
MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
|
|
MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
|
|
MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
|
|
MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
|
|
MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
|
|
|
|
MX6_MMDC_P0_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P1_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P0_MDSCR, 0x00000000,
|
|
MX6_MMDC_P0_MAPSR, 0x00011006,
|
|
};
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFFFF3, &ccm->CCGR2);
|
|
writel(0x3FF0300F, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000F3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
|
|
/*
|
|
* Setup CCM_CCOSR register as follows:
|
|
*
|
|
* cko1_en = 1 --> CKO1 enabled
|
|
* cko1_div = 111 --> divide by 8
|
|
* cko1_sel = 1011 --> ahb_clk_root
|
|
*
|
|
* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
|
|
*/
|
|
writel(0x000000FB, &ccm->ccosr);
|
|
}
|
|
|
|
static void gpr_init(void)
|
|
{
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
/* enable AXI cache for VDOA/VPU/IPU */
|
|
writel(0xF00000CF, &iomux->gpr[4]);
|
|
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
|
|
writel(0x007F007F, &iomux->gpr[6]);
|
|
writel(0x007F007F, &iomux->gpr[7]);
|
|
}
|
|
|
|
static void ddr_init(int *table, int size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size / 2 ; i++)
|
|
writel(table[2 * i + 1], table[2 * i]);
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
int minc, maxc;
|
|
|
|
switch (get_cpu_temp_grade(&minc, &maxc)) {
|
|
case TEMP_COMMERCIAL:
|
|
case TEMP_EXTCOMMERCIAL:
|
|
if (is_cpu_type(MXC_CPU_MX6DL)) {
|
|
puts("Commercial temperature grade DDR3 timings, 64bit bus width.\n");
|
|
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
|
|
} else {
|
|
puts("Commercial temperature grade DDR3 timings, 32bit bus width.\n");
|
|
ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
|
|
}
|
|
break;
|
|
case TEMP_INDUSTRIAL:
|
|
case TEMP_AUTOMOTIVE:
|
|
default:
|
|
if (is_cpu_type(MXC_CPU_MX6DL)) {
|
|
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
|
|
} else {
|
|
puts("Industrial temperature grade DDR3 timings, 32bit bus width.\n");
|
|
ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
|
|
}
|
|
break;
|
|
};
|
|
udelay(100);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
ccgr_init();
|
|
gpr_init();
|
|
|
|
/* iomux and setup of i2c */
|
|
board_early_init_f();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* Make sure we use dte mode */
|
|
setup_dtemode_uart();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
/* load/boot image from boot device */
|
|
board_init_r(NULL, 0);
|
|
}
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static struct mxc_serial_platdata mxc_serial_plat = {
|
|
.reg = (struct mxc_uart *)UART1_BASE,
|
|
.use_dte = true,
|
|
};
|
|
|
|
U_BOOT_DEVICE(mxc_serial) = {
|
|
.name = "serial_mxc",
|
|
.platdata = &mxc_serial_plat,
|
|
};
|