mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![]() - Add support for RPXlite_DW board - Update FLASH driver for 4*AM29DL323DB90VI - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board |
||
---|---|---|
.. | ||
config.mk | ||
flash.c | ||
Makefile | ||
README | ||
RPXlite_dw.c | ||
u-boot.lds | ||
u-boot.lds.debug |
After following the step of Yoo. Jonghoon and Wolfgang Denk, I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW. There are three differences between the Yoo-ported RPXlite and the RPXlite_DW. Board(in U-BOOT) version(in EmbeddedPlanet) CPU SDRAM FLASH RPXlite RPXlite CW 850 16MB 4MB RPXlite_DW RPXlite DW 823e 64MB 16MB This fireware is specially coded for EmbeddedPlanet Co. Software Development Platform(RPXlite DW),which has a NEC NL6448BC20-08 LCD panel. It has the following three features: 1. 64MHz/48MHz system frequence setting options. The default setting is 48MHz.To get a 64MHz u-boot,just add '64' in make command,like make RPXlite_DW_64_config make all 2. CFG_ENV_IS_IN_FLASH/CFG_ENV_IS_IN_NVRAM The default environment parameter is stored in FLASH because it is a common choice for environment parameter.So I make NVRAM as backup parameter storeage.The reason why I didn't use EEPROM for ENV is that PlanetCore V2.0 use EEPROM as environment parameter home.Because of the possibility of using two firewares on this board,I didn't 'disturb' EEPROM.To get NVRAM support,you may use the following build command: make RPXlite_DW_NVRAM_config make all 3. LCD panel support To support the Platform better,I added LCD panel(NL6448BC20-08) function.But bewear of the fact that once you build this support and program it to FLASH,you should make sure you put workable kernel and ramdisk at the right place in FLASH or through NFS. Otherwise, you must erase this fireware manually via BDI2000 or ICE tools.So this function is used for deployment and demo only.Pls look before you leap. To get a LCD support u-boot,you can do the following: make RPXlite_DW_LCD_config make all ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The basic make commands could be: make RPXlite_DW_config make RPXlite_DW_64_config make RPXlite_DW_LCD_config make RPXlite_DW_NVRAM_config BTW,you can combine the above features together and get a workable u-boot to meet your need. For example,to get a 64MHZ && ENV_IS_IN_FLASH && LCD panel support u-boot,you can type: make RPXlite_DW_NVRAM_64_LCD_config make all So other combining make commands could be: make RPXlite_DW_NVRAM_64_config make RPXlite_DW_NVRAM_LCD_config make RPXlite_DW_64_LCD_config ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The boot process by "make RPXlite_DW_config" could be: U-Boot 1.1.1 (Jun 8 2004 - 11:16:30) CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache Board: RPXlite_DW DRAM: 64 MB FLASH: 16 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: SCC ETHERNET u-boot> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I'd like to extend my heartfelt gratitute to kind people for helping me work it out. I would particually thank Wolfgang Denk for his nice help. Enjoy, Sam Song, samsongshu@yahoo.com.cn Institute of Electrical Machinery and Controls Shanghai University June 8,2004