mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 22:39:08 +09:00
![Rajesh Bhagat](/assets/img/avatar_default.png)
TFABOOT support includes: - ls1043ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN and QE address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
253 lines
5.8 KiB
C
253 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <fsl_ddr_dimm_params.h>
|
|
#include "ddr.h"
|
|
#ifdef CONFIG_FSL_DEEP_SLEEP
|
|
#include <fsl_sleep.h>
|
|
#endif
|
|
#include <asm/arch/clock.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
|
|
ulong ddr_freq;
|
|
|
|
if (ctrl_num > 1) {
|
|
printf("Not supported controller number %d\n", ctrl_num);
|
|
return;
|
|
}
|
|
if (!pdimm->n_ranks)
|
|
return;
|
|
|
|
pbsp = udimms[0];
|
|
|
|
/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
|
|
* freqency and n_banks specified in board_specific_parameters table.
|
|
*/
|
|
ddr_freq = get_ddr_freq(0) / 1000000;
|
|
while (pbsp->datarate_mhz_high) {
|
|
if (pbsp->n_ranks == pdimm->n_ranks) {
|
|
if (ddr_freq <= pbsp->datarate_mhz_high) {
|
|
popts->clk_adjust = pbsp->clk_adjust;
|
|
popts->wrlvl_start = pbsp->wrlvl_start;
|
|
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
|
|
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
|
|
popts->cpo_override = pbsp->cpo_override;
|
|
popts->write_data_delay =
|
|
pbsp->write_data_delay;
|
|
goto found;
|
|
}
|
|
pbsp_highest = pbsp;
|
|
}
|
|
pbsp++;
|
|
}
|
|
|
|
if (pbsp_highest) {
|
|
printf("Error: board specific timing not found for %lu MT/s\n",
|
|
ddr_freq);
|
|
printf("Trying to use the highest speed (%u) parameters\n",
|
|
pbsp_highest->datarate_mhz_high);
|
|
popts->clk_adjust = pbsp_highest->clk_adjust;
|
|
popts->wrlvl_start = pbsp_highest->wrlvl_start;
|
|
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
|
|
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
|
|
} else {
|
|
panic("DIMM is not supported by this board");
|
|
}
|
|
found:
|
|
debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
|
|
pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
|
|
|
|
/* force DDR bus width to 32 bits */
|
|
popts->data_bus_width = 1;
|
|
popts->otf_burst_chop_en = 0;
|
|
popts->burst_length = DDR_BL8;
|
|
|
|
/*
|
|
* Factors to consider for half-strength driver enable:
|
|
* - number of DIMMs installed
|
|
*/
|
|
popts->half_strength_driver_enable = 1;
|
|
/*
|
|
* Write leveling override
|
|
*/
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0xf;
|
|
|
|
/*
|
|
* Rtt and Rtt_WR override
|
|
*/
|
|
popts->rtt_override = 0;
|
|
|
|
/* Enable ZQ calibration */
|
|
popts->zq_en = 1;
|
|
|
|
/* optimize cpo for erratum A-009942 */
|
|
popts->cpo_sample = 0x46;
|
|
|
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
|
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
|
|
DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
|
|
}
|
|
|
|
/* DDR model number: MT40A512M8HX-093E */
|
|
#ifdef CONFIG_SYS_DDR_RAW_TIMING
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 2147483648u,
|
|
.capacity = 2147483648u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.bank_addr_bits = 0,
|
|
.bank_group_bits = 2,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tckmin_x_ps = 938,
|
|
.tckmax_ps = 1500,
|
|
.caslat_x = 0x000DFA00,
|
|
.taa_ps = 13500,
|
|
.trcd_ps = 13500,
|
|
.trp_ps = 13500,
|
|
.tras_ps = 33000,
|
|
.trc_ps = 46500,
|
|
.trfc1_ps = 260000,
|
|
.trfc2_ps = 160000,
|
|
.trfc4_ps = 110000,
|
|
.tfaw_ps = 21000,
|
|
.trrds_ps = 3700,
|
|
.trrdl_ps = 5300,
|
|
.tccdl_ps = 5355,
|
|
.refresh_rate_ps = 7800000,
|
|
.dq_mapping[0] = 0x0,
|
|
.dq_mapping[1] = 0x0,
|
|
.dq_mapping[2] = 0x0,
|
|
.dq_mapping[3] = 0x0,
|
|
.dq_mapping[4] = 0x0,
|
|
.dq_mapping[5] = 0x0,
|
|
.dq_mapping[6] = 0x0,
|
|
.dq_mapping[7] = 0x0,
|
|
.dq_mapping[8] = 0x0,
|
|
.dq_mapping[9] = 0x0,
|
|
.dq_mapping[10] = 0x0,
|
|
.dq_mapping[11] = 0x0,
|
|
.dq_mapping[12] = 0x0,
|
|
.dq_mapping[13] = 0x0,
|
|
.dq_mapping[14] = 0x0,
|
|
.dq_mapping[15] = 0x0,
|
|
.dq_mapping[16] = 0x0,
|
|
.dq_mapping[17] = 0x0,
|
|
.dq_mapping_ors = 0,
|
|
};
|
|
|
|
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
|
|
unsigned int controller_number,
|
|
unsigned int dimm_number)
|
|
{
|
|
static const char dimm_model[] = "Fixed DDR on board";
|
|
|
|
if (((controller_number == 0) && (dimm_number == 0)) ||
|
|
((controller_number == 1) && (dimm_number == 0))) {
|
|
memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
int i;
|
|
char buf[32];
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs;
|
|
phys_size_t ddr_size;
|
|
ulong ddr_freq, ddr_freq_mhz;
|
|
|
|
ddr_freq = get_ddr_freq(0);
|
|
ddr_freq_mhz = ddr_freq / 1000000;
|
|
|
|
printf("Configuring DDR for %s MT/s data rate\n",
|
|
strmhz(buf, ddr_freq));
|
|
|
|
for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
|
|
if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
|
|
(ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
|
|
memcpy(&ddr_cfg_regs,
|
|
fixed_ddr_parm_0[i].ddr_settings,
|
|
sizeof(ddr_cfg_regs));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (fixed_ddr_parm_0[i].max_freq == 0)
|
|
panic("Unsupported DDR data rate %s MT/s data rate\n",
|
|
strmhz(buf, ddr_freq));
|
|
|
|
ddr_size = (phys_size_t)2048 * 1024 * 1024;
|
|
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
|
|
|
|
return ddr_size;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_TFABOOT
|
|
int fsl_initdram(void)
|
|
{
|
|
gd->ram_size = tfa_get_dram_size();
|
|
if (!gd->ram_size)
|
|
#ifdef CONFIG_SYS_DDR_RAW_TIMING
|
|
gd->ram_size = fsl_ddr_sdram_size();
|
|
#else
|
|
gd->ram_size = 0x80000000;
|
|
#endif
|
|
return 0;
|
|
}
|
|
#else
|
|
int fsl_initdram(void)
|
|
{
|
|
phys_size_t dram_size;
|
|
|
|
#ifdef CONFIG_SYS_DDR_RAW_TIMING
|
|
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
|
|
puts("Initializing DDR....\n");
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fsl_ddr_sdram_size();
|
|
#endif
|
|
#else
|
|
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
|
|
puts("Initialzing DDR using fixed setting\n");
|
|
dram_size = fixed_sdram();
|
|
#else
|
|
gd->ram_size = 0x80000000;
|
|
|
|
return 0;
|
|
#endif
|
|
#endif
|
|
erratum_a008850_post();
|
|
|
|
#ifdef CONFIG_FSL_DEEP_SLEEP
|
|
fsl_dp_ddr_restore();
|
|
#endif
|
|
|
|
gd->ram_size = dram_size;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|