mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Anton Vorontsov](/assets/img/avatar_default.png)
move the BRx_* and ORx_* left behind in mpc85xx.h The same is needed for mpc8xx.h and mpc8260.h (defines are almost the same, just few differences which needs some attention though). But the bad news for mpc8xx and mpc8260 is that there are a lot of users of these defines. So this cleanup I'll leave for the "better times". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
713 lines
20 KiB
C
713 lines
20 KiB
C
/*
|
|
* Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
MPC8349E-mITX and MPC8349E-mITX-GP board configuration file
|
|
|
|
Memory map:
|
|
|
|
0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
|
|
0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
|
|
0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
|
|
0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
|
|
0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
|
|
0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
|
|
0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only)
|
|
0xF001_0000-0xF001_FFFF Local bus expansion slot
|
|
0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only)
|
|
0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory
|
|
0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only)
|
|
|
|
I2C address list:
|
|
Align. Board
|
|
Bus Addr Part No. Description Length Location
|
|
----------------------------------------------------------------
|
|
I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64
|
|
|
|
I2C1 0x20 PCF8574 I2C Expander 0 U8
|
|
I2C1 0x21 PCF8574 I2C Expander 0 U10
|
|
I2C1 0x38 PCF8574A I2C Expander 0 U8
|
|
I2C1 0x39 PCF8574A I2C Expander 0 U10
|
|
I2C1 0x51 (DDR) DDR EEPROM 1 U1
|
|
I2C1 0x68 DS1339 RTC 1 U68
|
|
|
|
Note that a given board has *either* a pair of 8574s or a pair of 8574As.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#if (TEXT_BASE == 0xFE000000)
|
|
#define CFG_LOWBOOT
|
|
#endif
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */
|
|
#define CONFIG_MPC8349 /* MPC8349 specific */
|
|
|
|
#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */
|
|
|
|
#define CONFIG_MISC_INIT_F
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/*
|
|
* On-board devices
|
|
*/
|
|
|
|
#ifdef CONFIG_MPC8349ITX
|
|
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
|
|
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
|
|
#endif
|
|
|
|
#define CONFIG_PCI
|
|
#define CONFIG_RTC_DS1337
|
|
#define CONFIG_HARD_I2C
|
|
#define CONFIG_TSEC_ENET /* TSEC Ethernet support */
|
|
|
|
/*
|
|
* Device configurations
|
|
*/
|
|
|
|
/* I2C */
|
|
#ifdef CONFIG_HARD_I2C
|
|
|
|
#define CONFIG_FSL_I2C
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_I2C_CMD_TREE
|
|
#define CFG_I2C_OFFSET 0x3000
|
|
#define CFG_I2C2_OFFSET 0x3100
|
|
#define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */
|
|
|
|
#define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */
|
|
#define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */
|
|
#define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */
|
|
#define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */
|
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */
|
|
#define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/
|
|
#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */
|
|
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
#define CFG_I2C_SLAVE 0x7F
|
|
|
|
/* Don't probe these addresses: */
|
|
#define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \
|
|
{1, CFG_I2C_8574_ADDR2}, \
|
|
{1, CFG_I2C_8574A_ADDR1}, \
|
|
{1, CFG_I2C_8574A_ADDR2}}
|
|
/* Bit definitions for the 8574[A] I2C expander */
|
|
#define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
|
|
#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */
|
|
#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */
|
|
#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
|
|
#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/
|
|
|
|
#undef CONFIG_SOFT_I2C
|
|
|
|
#endif
|
|
|
|
/* Compact Flash */
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
|
|
#define CFG_IDE_MAXBUS 1
|
|
#define CFG_IDE_MAXDEVICE 1
|
|
|
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
|
#define CFG_ATA_BASE_ADDR CFG_CF_BASE
|
|
#define CFG_ATA_DATA_OFFSET 0x0000
|
|
#define CFG_ATA_REG_OFFSET 0
|
|
#define CFG_ATA_ALT_OFFSET 0x0200
|
|
#define CFG_ATA_STRIDE 2
|
|
|
|
#define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#endif
|
|
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
|
|
#define CFG_SDRAM_BASE CFG_DDR_BASE
|
|
#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
|
|
#define CFG_83XX_DDR_USES_CS0
|
|
#define CFG_MEMTEST_START 0x1000 /* memtest region */
|
|
#define CFG_MEMTEST_END 0x2000
|
|
|
|
#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
|
|
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */
|
|
#define CFG_DDR_SIZE 256 /* Mb */
|
|
#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
|
|
|
|
#define CFG_DDR_TIMING_1 0x26242321
|
|
#define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */
|
|
#endif
|
|
|
|
/*
|
|
*Flash on the Local Bus
|
|
*/
|
|
|
|
#define CFG_FLASH_CFI /* use the Common Flash Interface */
|
|
#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
|
|
#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */
|
|
#define CFG_FLASH_EMPTY_INFO
|
|
#define CFG_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */
|
|
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
/* The ITX has two flash chips, but the ITX-GP has only one. To support both
|
|
boards, we say we have two, but don't display a message if we find only one. */
|
|
#define CFG_FLASH_QUIET_TEST
|
|
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
|
|
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
|
|
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
|
|
#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
|
|
|
|
/* Vitesse 7385 */
|
|
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
|
|
#define CONFIG_TSEC2
|
|
|
|
/* The flash address and size of the VSC7385 firmware image */
|
|
#define CONFIG_VSC7385_IMAGE 0xFEFFE000
|
|
#define CONFIG_VSC7385_IMAGE_SIZE 8192
|
|
|
|
#endif
|
|
|
|
/*
|
|
* BRx, ORx, LBLAWBARx, and LBLAWARx
|
|
*/
|
|
|
|
/* Flash */
|
|
|
|
#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V)
|
|
#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
|
|
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
|
|
OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE
|
|
#define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT))
|
|
|
|
/* Vitesse 7385 */
|
|
|
|
#define CFG_VSC7385_BASE 0xF8000000
|
|
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
|
|
#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V)
|
|
#define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
|
|
OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
|
|
OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
|
|
#define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE
|
|
#define CFG_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB)
|
|
|
|
#endif
|
|
|
|
/* LED */
|
|
|
|
#define CFG_LED_BASE 0xF9000000
|
|
#define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V)
|
|
#define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
|
|
OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \
|
|
OR_GPCM_EHTR | OR_GPCM_EAD)
|
|
|
|
/* Compact Flash */
|
|
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
|
|
#define CFG_CF_BASE 0xF0000000
|
|
|
|
#define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
|
|
#define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI)
|
|
|
|
#define CFG_LBLAWBAR3_PRELIM CFG_CF_BASE
|
|
#define CFG_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot memory configuration
|
|
*/
|
|
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
|
|
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
#define CFG_RAMBOOT
|
|
#else
|
|
#undef CFG_RAMBOOT
|
|
#endif
|
|
|
|
#define CONFIG_L1_INIT_RAM
|
|
#define CFG_INIT_RAM_LOCK
|
|
#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
|
|
#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/
|
|
|
|
#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
|
|
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
|
|
|
/*
|
|
* Local Bus LCRR and LBCR regs
|
|
* LCRR: DLL bypass, Clock divider is 4
|
|
* External Local Bus rate is
|
|
* CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
|
|
*/
|
|
#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4)
|
|
#define CFG_LBC_LBCR 0x00000000
|
|
|
|
#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
|
|
#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_CONS_INDEX 1
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE 1
|
|
#define CFG_NS16550_CLK get_bus_freq(0)
|
|
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
|
|
#define CONFIG_CONSOLE ttyS0
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
|
|
#define CFG_NS16550_COM2 (CFG_IMMR + 0x4600)
|
|
|
|
/* pass open firmware flat tree */
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
|
|
|
/*
|
|
* PCI
|
|
*/
|
|
#ifdef CONFIG_PCI
|
|
|
|
#define CONFIG_MPC83XX_PCI2
|
|
|
|
/*
|
|
* General PCI
|
|
* Addresses are mapped 1-1.
|
|
*/
|
|
#define CFG_PCI1_MEM_BASE 0x80000000
|
|
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
|
|
#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
|
|
#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
|
|
#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI1_IO_BASE 0x00000000
|
|
#define CFG_PCI1_IO_PHYS 0xE2000000
|
|
#define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */
|
|
|
|
#ifdef CONFIG_MPC83XX_PCI2
|
|
#define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
|
|
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
|
|
#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
|
|
#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE
|
|
#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */
|
|
#define CFG_PCI2_IO_BASE 0x00000000
|
|
#define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
|
|
#define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */
|
|
#endif
|
|
|
|
#define _IO_BASE 0x00000000 /* points to PCI I/O space */
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#ifdef CONFIG_RTL8139
|
|
/* This macro is used by RTL8139 but not defined in PPC architecture */
|
|
#define KSEG1ADDR(x) (x)
|
|
#endif
|
|
|
|
#ifndef CONFIG_PCI_PNP
|
|
#define PCI_ENET0_IOADDR 0x00000000
|
|
#define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE
|
|
#define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */
|
|
#endif
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
|
|
#endif
|
|
|
|
#define PCI_66M
|
|
#ifdef PCI_66M
|
|
#define CONFIG_83XX_CLKIN 66666666 /* in Hz */
|
|
#else
|
|
#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
|
|
#endif
|
|
|
|
/* TSEC */
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_MII
|
|
#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */
|
|
|
|
#define CONFIG_TSEC1
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CFG_TSEC1_OFFSET 0x24000
|
|
#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#endif
|
|
|
|
#ifdef CONFIG_TSEC2
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
#define CFG_TSEC2_OFFSET 0x25000
|
|
|
|
#define TSEC2_PHY_ADDR 4
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#endif
|
|
|
|
#define CONFIG_ETHPRIME "Freescale TSEC"
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#ifndef CFG_RAMBOOT
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
|
|
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
|
|
#define CFG_ENV_SIZE 0x2000
|
|
#else
|
|
#define CFG_NO_FLASH /* Flash is not usable now */
|
|
#undef CFG_FLASH_CFI_DRIVER
|
|
#define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
|
|
#define CFG_ENV_SIZE 0x2000
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SDRAM
|
|
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_FAT
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
#ifdef CONFIG_HARD_I2C
|
|
#define CONFIG_CMD_I2C
|
|
#endif
|
|
|
|
/* Watchdog */
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
|
|
#define CFG_HUSH_PARSER /* Use the HUSH parser */
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
|
|
#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
|
|
|
|
#ifdef CONFIG_MPC8349ITX
|
|
#define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */
|
|
#else
|
|
#define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
|
|
|
|
#define CFG_HRCW_LOW (\
|
|
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
|
HRCWL_DDR_TO_SCB_CLK_1X1 |\
|
|
HRCWL_CSB_TO_CLKIN_4X1 |\
|
|
HRCWL_VCO_1X2 |\
|
|
HRCWL_CORE_TO_CSB_2X1)
|
|
|
|
#ifdef CFG_LOWBOOT
|
|
#define CFG_HRCW_HIGH (\
|
|
HRCWH_PCI_HOST |\
|
|
HRCWH_32_BIT_PCI |\
|
|
HRCWH_PCI1_ARBITER_ENABLE |\
|
|
HRCWH_PCI2_ARBITER_ENABLE |\
|
|
HRCWH_CORE_ENABLE |\
|
|
HRCWH_FROM_0X00000100 |\
|
|
HRCWH_BOOTSEQ_DISABLE |\
|
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
|
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
|
HRCWH_TSEC1M_IN_GMII |\
|
|
HRCWH_TSEC2M_IN_GMII )
|
|
#else
|
|
#define CFG_HRCW_HIGH (\
|
|
HRCWH_PCI_HOST |\
|
|
HRCWH_32_BIT_PCI |\
|
|
HRCWH_PCI1_ARBITER_ENABLE |\
|
|
HRCWH_PCI2_ARBITER_ENABLE |\
|
|
HRCWH_CORE_ENABLE |\
|
|
HRCWH_FROM_0XFFF00100 |\
|
|
HRCWH_BOOTSEQ_DISABLE |\
|
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
|
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
|
HRCWH_TSEC1M_IN_GMII |\
|
|
HRCWH_TSEC2M_IN_GMII )
|
|
#endif
|
|
|
|
/*
|
|
* System performance
|
|
*/
|
|
#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
|
|
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
|
|
#define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */
|
|
#define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */
|
|
#define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
|
|
#define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
|
|
|
|
/*
|
|
* System IO Config
|
|
*/
|
|
#define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */
|
|
#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
|
|
|
|
#define CFG_HID0_INIT 0x000000000
|
|
#define CFG_HID0_FINAL CFG_HID0_INIT
|
|
|
|
#define CFG_HID2 HID2_HBE
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/* DDR */
|
|
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* PCI */
|
|
#ifdef CONFIG_PCI
|
|
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#else
|
|
#define CFG_IBAT1L 0
|
|
#define CFG_IBAT1U 0
|
|
#define CFG_IBAT2L 0
|
|
#define CFG_IBAT2U 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC83XX_PCI2
|
|
#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#else
|
|
#define CFG_IBAT3L 0
|
|
#define CFG_IBAT3U 0
|
|
#define CFG_IBAT4L 0
|
|
#define CFG_IBAT4U 0
|
|
#endif
|
|
|
|
/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
|
|
#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
|
|
#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
|
|
#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
#define CFG_IBAT7L 0
|
|
#define CFG_IBAT7U 0
|
|
|
|
#define CFG_DBAT0L CFG_IBAT0L
|
|
#define CFG_DBAT0U CFG_IBAT0U
|
|
#define CFG_DBAT1L CFG_IBAT1L
|
|
#define CFG_DBAT1U CFG_IBAT1U
|
|
#define CFG_DBAT2L CFG_IBAT2L
|
|
#define CFG_DBAT2U CFG_IBAT2U
|
|
#define CFG_DBAT3L CFG_IBAT3L
|
|
#define CFG_DBAT3U CFG_IBAT3U
|
|
#define CFG_DBAT4L CFG_IBAT4L
|
|
#define CFG_DBAT4U CFG_IBAT4U
|
|
#define CFG_DBAT5L CFG_IBAT5L
|
|
#define CFG_DBAT5U CFG_IBAT5U
|
|
#define CFG_DBAT6L CFG_IBAT6L
|
|
#define CFG_DBAT6U CFG_IBAT6U
|
|
#define CFG_DBAT7L CFG_IBAT7L
|
|
#define CFG_DBAT7U CFG_IBAT7U
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#ifdef CONFIG_HAS_ETH0
|
|
#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_ETH1
|
|
#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
|
|
#endif
|
|
|
|
#define CONFIG_IPADDR 192.168.1.253
|
|
#define CONFIG_SERVERIP 192.168.1.1
|
|
#define CONFIG_GATEWAYIP 192.168.1.1
|
|
#define CONFIG_NETMASK 255.255.252.0
|
|
#define CONFIG_NETDEV eth0
|
|
|
|
#ifdef CONFIG_MPC8349ITX
|
|
#define CONFIG_HOSTNAME mpc8349emitx
|
|
#else
|
|
#define CONFIG_HOSTNAME mpc8349emitxgp
|
|
#endif
|
|
|
|
/* Default path and filenames */
|
|
#define CONFIG_ROOTPATH /nfsroot/rootfs
|
|
#define CONFIG_BOOTFILE uImage
|
|
#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
|
|
|
|
#ifdef CONFIG_MPC8349ITX
|
|
#define CONFIG_FDTFILE mpc8349emitx.dtb
|
|
#else
|
|
#define CONFIG_FDTFILE mpc8349emitxgp.dtb
|
|
#endif
|
|
|
|
#define CONFIG_BOOTDELAY 0
|
|
|
|
#define XMK_STR(x) #x
|
|
#define MK_STR(x) XMK_STR(x)
|
|
|
|
#define CONFIG_BOOTARGS \
|
|
"root=/dev/nfs rw" \
|
|
" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
|
|
" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
|
|
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
|
|
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
|
|
" console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=" MK_STR(CONFIG_CONSOLE) "\0" \
|
|
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
|
|
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
|
|
"tftpflash=tftpboot $loadaddr $uboot; " \
|
|
"protect off " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"erase " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
|
|
"protect on " MK_STR(TEXT_BASE) " +$filesize; " \
|
|
"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
|
|
"fdtaddr=400000\0" \
|
|
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \
|
|
" ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
|
|
" console=$console,$baudrate $othbootargs; " \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr - $fdtaddr"
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw" \
|
|
" console=$console,$baudrate $othbootargs; " \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#undef MK_STR
|
|
#undef XMK_STR
|
|
|
|
#endif
|