mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 05:48:51 +09:00
![Scott Wood](/assets/img/avatar_default.png)
This allows DDR configuration to be deferred to the final U-Boot image, which is able to make use of SPD data. The SPL itself cannot use SPD due to code size constraints. It previously used fixed register values for DDR configuration, and those values did not work on the p2020rdb-pca board I tested with. It's possible that different revisions of the board require different settings. Using SPD eliminates that problem. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
295 lines
7.3 KiB
C
295 lines
7.3 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* Version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_ddr_dimm_params.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_law.h>
|
|
|
|
#ifdef CONFIG_SYS_DDR_RAW_TIMING
|
|
#if defined(CONFIG_P1020RDB_PROTO) || \
|
|
defined(CONFIG_P1021RDB) || \
|
|
defined(CONFIG_P1020UTM)
|
|
/* Micron MT41J256M8_187E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1870,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P2020RDB)
|
|
/* Micron MT41J128M16_15E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 64,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 14,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1500,
|
|
.caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */
|
|
.tAA_ps = 13500,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13500,
|
|
.tRRD_ps = 6000,
|
|
.tRP_ps = 13500,
|
|
.tRAS_ps = 36000,
|
|
.tRC_ps = 49500,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 30000,
|
|
};
|
|
#elif defined(CONFIG_P1020MBG)
|
|
/* Micron MT41J512M8_187E */
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 2,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 2147483648u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1870,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P1020RDB)
|
|
/*
|
|
* Samsung K4B2G0846C-HCF8
|
|
* The following timing are for "downshift"
|
|
* i.e. to use CL9 part as CL7
|
|
* otherwise, tAA, tRCD, tRP will be 13500ps
|
|
* and tRC will be 49500ps
|
|
*/
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1875,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
#elif defined(CONFIG_P1024RDB) || \
|
|
defined(CONFIG_P1025RDB)
|
|
/*
|
|
* Samsung K4B2G0846C-HCH9
|
|
* The following timing are for "downshift"
|
|
* i.e. to use CL9 part as CL7
|
|
* otherwise, tAA, tRCD, tRP will be 13500ps
|
|
* and tRC will be 49500ps
|
|
*/
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1500,
|
|
.caslat_X = 0x3e << 4, /* 5,6,7,8,9 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 6000,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 36000,
|
|
.tRC_ps = 49125,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 30000,
|
|
};
|
|
#else
|
|
#error Missing raw timing data for this board
|
|
#endif
|
|
|
|
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
|
|
unsigned int controller_number,
|
|
unsigned int dimm_number)
|
|
{
|
|
const char dimm_model[] = "Fixed DDR on board";
|
|
|
|
if ((controller_number == 0) && (dimm_number == 0)) {
|
|
memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SYS_DDR_RAW_TIMING */
|
|
|
|
#ifdef CONFIG_SYS_DDR_CS0_BNDS
|
|
/* Fixed sdram init -- doesn't use serial presence detect. */
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
char buf[32];
|
|
size_t ddr_size;
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs = {
|
|
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
|
|
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
|
|
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
|
|
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
|
|
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
|
|
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
|
|
.cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
|
|
#endif
|
|
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
|
|
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
|
|
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
|
|
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
|
|
.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
|
|
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
|
|
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
|
|
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
|
|
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
|
|
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
|
|
.ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
|
|
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
|
|
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
|
|
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
|
|
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
|
|
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
|
|
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
|
|
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
|
|
.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
|
|
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
|
|
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
|
|
};
|
|
|
|
get_sys_info(&sysinfo);
|
|
printf("Configuring DDR for %s MT/s data rate\n",
|
|
strmhz(buf, sysinfo.freqDDRBus));
|
|
|
|
ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
|
|
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
|
|
|
|
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
|
|
ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
|
|
printf("ERROR setting Local Access Windows for DDR\n");
|
|
return 0;
|
|
};
|
|
|
|
return ddr_size;
|
|
}
|
|
#endif
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
int i;
|
|
popts->clk_adjust = 6;
|
|
popts->cpo_override = 0x1f;
|
|
popts->write_data_delay = 2;
|
|
popts->half_strength_driver_enable = 1;
|
|
/* Write leveling override */
|
|
popts->wrlvl_en = 1;
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0xf;
|
|
popts->wrlvl_start = 0x8;
|
|
popts->trwt_override = 1;
|
|
popts->trwt = 0;
|
|
|
|
if (pdimm->primary_sdram_width == 64)
|
|
popts->data_bus_width = 0;
|
|
else if (pdimm->primary_sdram_width == 32)
|
|
popts->data_bus_width = 1;
|
|
else
|
|
printf("Error in DDR bus width configuration!\n");
|
|
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
|
|
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
|
|
}
|
|
}
|