mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 19:38:52 +09:00
![Jagan Teki](/assets/img/avatar_default.png)
Update all A83T devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 221cb9fd2ee3042689fe0e6613d0f34eb46a5af6 Author: Mylène Josserand <mylene.josserand@bootlin.com> Date: Fri May 4 21:05:44 2018 +0200 ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC Note: bananapi-m3 and cubietruck-plus board dts files has usb_otg enabled in U-Boot which were not present in Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
424 lines
9.2 KiB
Plaintext
424 lines
9.2 KiB
Plaintext
/*
|
|
* Copyright (C) 2017 Touchless Biometric Systems AG
|
|
* Tomas Novotny <tomas@novotny.cz>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "sun8i-a83t.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "TBS A711 Tablet";
|
|
compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
|
|
enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
|
|
|
|
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <9>;
|
|
};
|
|
|
|
panel {
|
|
compatible = "tbs,a711-panel", "panel-lvds";
|
|
backlight = <&backlight>;
|
|
power-supply = <®_sw>;
|
|
|
|
width-mm = <153>;
|
|
height-mm = <90>;
|
|
data-mapping = "vesa-24";
|
|
|
|
panel-timing {
|
|
/* 1024x600 @60Hz */
|
|
clock-frequency = <52000000>;
|
|
hactive = <1024>;
|
|
vactive = <600>;
|
|
hsync-len = <20>;
|
|
hfront-porch = <180>;
|
|
hback-porch = <160>;
|
|
vfront-porch = <12>;
|
|
vback-porch = <23>;
|
|
vsync-len = <5>;
|
|
};
|
|
|
|
port {
|
|
panel_input: endpoint {
|
|
remote-endpoint = <&tcon0_out_lcd>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_vbat: reg-vbat {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat";
|
|
regulator-min-microvolt = <3700000>;
|
|
regulator-max-microvolt = <3700000>;
|
|
};
|
|
|
|
reg_vmain: reg-vmain {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmain";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
vin-supply = <®_vbat>;
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
|
|
|
|
/*
|
|
* This is actually Bluetooth's clock, but we have to
|
|
* hook it up somewheere
|
|
*/
|
|
clocks = <&ac100_rtc 1>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu100 {
|
|
cpu-supply = <®_dcdc3>;
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* An USB-2 hub is connected here, which also means we don't need to
|
|
* enable the OHCI controller.
|
|
*/
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/*
|
|
* There's a modem connected here that needs to be initialised before
|
|
* being able to be enumerated.
|
|
*/
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_dcdc1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_dldo1>;
|
|
vqmmc-supply = <®_dldo1>;
|
|
non-removable;
|
|
wakeup-source;
|
|
status = "okay";
|
|
|
|
brcmf: wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&r_pio>;
|
|
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_dcdc1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp81x: pmic@3a3 {
|
|
compatible = "x-powers,axp813";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
swin-supply = <®_dcdc1>;
|
|
x-powers,drive-vbus-en;
|
|
};
|
|
|
|
ac100: codec@e89 {
|
|
compatible = "x-powers,ac100";
|
|
reg = <0xe89>;
|
|
|
|
ac100_codec: codec {
|
|
compatible = "x-powers,ac100-codec";
|
|
interrupt-parent = <&r_pio>;
|
|
interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
|
|
#clock-cells = <0>;
|
|
clock-output-names = "4M_adda";
|
|
};
|
|
|
|
ac100_rtc: rtc {
|
|
compatible = "x-powers,ac100-rtc";
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&ac100_codec>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "cko1_rtc",
|
|
"cko2_rtc",
|
|
"cko3_rtc";
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
#include "axp81x.dtsi"
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-1.8";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-name = "vdd-drampll";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-name = "avcc";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-always-on;
|
|
regulator-name = "vcc-io";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-name = "vdd-cpu-A";
|
|
};
|
|
|
|
®_dcdc3 {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-name = "vdd-cpu-B";
|
|
};
|
|
|
|
®_dcdc4 {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-gpu";
|
|
};
|
|
|
|
®_dcdc5 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-always-on;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-name = "vcc-wifi-io";
|
|
};
|
|
|
|
®_dldo2 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <4200000>;
|
|
regulator-name = "vcc-mipi";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "vdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_drivevbus {
|
|
regulator-name = "usb0-vbus";
|
|
status = "okay";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-csi-r";
|
|
};
|
|
|
|
®_eldo2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-dsi";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-csi-f";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-hsic";
|
|
};
|
|
|
|
®_fldo2 {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_ldo_io0 {
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-name = "vcc-ctp";
|
|
status = "okay";
|
|
};
|
|
|
|
®_ldo_io1 {
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-name = "vcc-vb";
|
|
status = "okay";
|
|
};
|
|
|
|
®_sw {
|
|
regulator-min-microvolt = <3100000>;
|
|
regulator-max-microvolt = <3100000>;
|
|
regulator-name = "vcc-lcd";
|
|
};
|
|
|
|
&tcon0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_lvds_pins>;
|
|
};
|
|
|
|
&tcon0_out {
|
|
tcon0_out_lcd: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_input>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* There's the BT part of the AP6210 connected to that UART */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
|
|
usb0_vbus-supply = <®_drivevbus>;
|
|
usb1_vbus_supply = <®_vmain>;
|
|
usb2_vbus_supply = <®_vmain>;
|
|
status = "okay";
|
|
};
|