mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
879 lines
23 KiB
C
879 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Rockchip DesignWare based PCIe host controller driver
|
|
*
|
|
* Copyright (c) 2021 Rockchip, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <generic-phy.h>
|
|
#include <pci.h>
|
|
#include <power-domain.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/delay.h>
|
|
#include <power/regulator.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/**
|
|
* struct rk_pcie - RK DW PCIe controller state
|
|
*
|
|
* @vpcie3v3: The 3.3v power supply for slot
|
|
* @dbi_base: The base address of dwc core regs
|
|
* @apb_base: The base address of vendor regs
|
|
* @cfg_base: The base address of config header space
|
|
* @cfg_size: The size of the configuration space which is needed
|
|
* as it gets written into the PCIE_ATU_LIMIT register
|
|
* @first_busno: This driver supports multiple PCIe controllers.
|
|
* first_busno stores the bus number of the PCIe root-port
|
|
* number which may vary depending on the PCIe setup
|
|
* (PEX switches etc).
|
|
* @rst_gpio: The #PERST signal for slot
|
|
* @io: The IO space for EP's BAR
|
|
* @mem: The memory space for EP's BAR
|
|
*/
|
|
struct rk_pcie {
|
|
struct udevice *dev;
|
|
struct udevice *vpcie3v3;
|
|
void *dbi_base;
|
|
void *apb_base;
|
|
void *cfg_base;
|
|
fdt_size_t cfg_size;
|
|
struct phy phy;
|
|
struct clk_bulk clks;
|
|
int first_busno;
|
|
struct reset_ctl_bulk rsts;
|
|
struct gpio_desc rst_gpio;
|
|
struct pci_region io;
|
|
struct pci_region mem;
|
|
};
|
|
|
|
/* Parameters for the waiting for iATU enabled routine */
|
|
#define PCIE_CLIENT_GENERAL_DEBUG 0x104
|
|
#define PCIE_CLIENT_HOT_RESET_CTRL 0x180
|
|
#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4)
|
|
#define PCIE_CLIENT_LTSSM_STATUS 0x300
|
|
#define SMLH_LINKUP BIT(16)
|
|
#define RDLH_LINKUP BIT(17)
|
|
#define PCIE_CLIENT_DBG_FIFO_MODE_CON 0x310
|
|
#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0 0x320
|
|
#define PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1 0x324
|
|
#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0 0x328
|
|
#define PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1 0x32c
|
|
#define PCIE_CLIENT_DBG_FIFO_STATUS 0x350
|
|
#define PCIE_CLIENT_DBG_TRANSITION_DATA 0xffff0000
|
|
#define PCIE_CLIENT_DBF_EN 0xffff0003
|
|
|
|
/* PCI DBICS registers */
|
|
#define PCIE_LINK_STATUS_REG 0x80
|
|
#define PCIE_LINK_STATUS_SPEED_OFF 16
|
|
#define PCIE_LINK_STATUS_SPEED_MASK (0xf << PCIE_LINK_STATUS_SPEED_OFF)
|
|
#define PCIE_LINK_STATUS_WIDTH_OFF 20
|
|
#define PCIE_LINK_STATUS_WIDTH_MASK (0xf << PCIE_LINK_STATUS_WIDTH_OFF)
|
|
|
|
#define PCIE_LINK_CAPABILITY 0x7c
|
|
#define PCIE_LINK_CTL_2 0xa0
|
|
#define TARGET_LINK_SPEED_MASK 0xf
|
|
#define LINK_SPEED_GEN_1 0x1
|
|
#define LINK_SPEED_GEN_2 0x2
|
|
#define LINK_SPEED_GEN_3 0x3
|
|
|
|
#define PCIE_MISC_CONTROL_1_OFF 0x8bc
|
|
#define PCIE_DBI_RO_WR_EN BIT(0)
|
|
|
|
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80c
|
|
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
|
|
|
|
/*
|
|
* iATU Unroll-specific register definitions
|
|
* From 4.80 core version the address translation will be made by unroll.
|
|
* The registers are offset from atu_base
|
|
*/
|
|
#define PCIE_ATU_UNR_REGION_CTRL1 0x00
|
|
#define PCIE_ATU_UNR_REGION_CTRL2 0x04
|
|
#define PCIE_ATU_UNR_LOWER_BASE 0x08
|
|
#define PCIE_ATU_UNR_UPPER_BASE 0x0c
|
|
#define PCIE_ATU_UNR_LIMIT 0x10
|
|
#define PCIE_ATU_UNR_LOWER_TARGET 0x14
|
|
#define PCIE_ATU_UNR_UPPER_TARGET 0x18
|
|
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
|
|
/* Register address builder */
|
|
#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
|
|
((0x3 << 20) | ((region) << 9))
|
|
|
|
/* Parameters for the waiting for iATU enabled routine */
|
|
#define LINK_WAIT_MAX_IATU_RETRIES 5
|
|
#define LINK_WAIT_IATU_US 10000
|
|
|
|
/* Parameters for the waiting for #perst signal */
|
|
#define PERST_WAIT_MS 1000
|
|
|
|
static int rk_pcie_read(void __iomem *addr, int size, u32 *val)
|
|
{
|
|
if ((uintptr_t)addr & (size - 1)) {
|
|
*val = 0;
|
|
return PCIBIOS_UNSUPPORTED;
|
|
}
|
|
|
|
if (size == 4) {
|
|
*val = readl(addr);
|
|
} else if (size == 2) {
|
|
*val = readw(addr);
|
|
} else if (size == 1) {
|
|
*val = readb(addr);
|
|
} else {
|
|
*val = 0;
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_pcie_write(void __iomem *addr, int size, u32 val)
|
|
{
|
|
if ((uintptr_t)addr & (size - 1))
|
|
return PCIBIOS_UNSUPPORTED;
|
|
|
|
if (size == 4)
|
|
writel(val, addr);
|
|
else if (size == 2)
|
|
writew(val, addr);
|
|
else if (size == 1)
|
|
writeb(val, addr);
|
|
else
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 __rk_pcie_read_apb(struct rk_pcie *rk_pcie, void __iomem *base,
|
|
u32 reg, size_t size)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = rk_pcie_read(base + reg, size, &val);
|
|
if (ret)
|
|
dev_err(rk_pcie->dev, "Read APB address failed\n");
|
|
|
|
return val;
|
|
}
|
|
|
|
static void __rk_pcie_write_apb(struct rk_pcie *rk_pcie, void __iomem *base,
|
|
u32 reg, size_t size, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = rk_pcie_write(base + reg, size, val);
|
|
if (ret)
|
|
dev_err(rk_pcie->dev, "Write APB address failed\n");
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_readl_apb() - Read vendor regs
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @reg: Offset of regs
|
|
*/
|
|
static inline u32 rk_pcie_readl_apb(struct rk_pcie *rk_pcie, u32 reg)
|
|
{
|
|
return __rk_pcie_read_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4);
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_writel_apb() - Write vendor regs
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @reg: Offset of regs
|
|
* @val: Value to be writen
|
|
*/
|
|
static inline void rk_pcie_writel_apb(struct rk_pcie *rk_pcie, u32 reg,
|
|
u32 val)
|
|
{
|
|
__rk_pcie_write_apb(rk_pcie, rk_pcie->apb_base, reg, 0x4, val);
|
|
}
|
|
|
|
static int rk_pcie_get_link_speed(struct rk_pcie *rk_pcie)
|
|
{
|
|
return (readl(rk_pcie->dbi_base + PCIE_LINK_STATUS_REG) &
|
|
PCIE_LINK_STATUS_SPEED_MASK) >> PCIE_LINK_STATUS_SPEED_OFF;
|
|
}
|
|
|
|
static int rk_pcie_get_link_width(struct rk_pcie *rk_pcie)
|
|
{
|
|
return (readl(rk_pcie->dbi_base + PCIE_LINK_STATUS_REG) &
|
|
PCIE_LINK_STATUS_WIDTH_MASK) >> PCIE_LINK_STATUS_WIDTH_OFF;
|
|
}
|
|
|
|
static void rk_pcie_writel_ob_unroll(struct rk_pcie *rk_pcie, u32 index,
|
|
u32 reg, u32 val)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
void __iomem *base = rk_pcie->dbi_base;
|
|
|
|
writel(val, base + offset + reg);
|
|
}
|
|
|
|
static u32 rk_pcie_readl_ob_unroll(struct rk_pcie *rk_pcie, u32 index, u32 reg)
|
|
{
|
|
u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
|
|
void __iomem *base = rk_pcie->dbi_base;
|
|
|
|
return readl(base + offset + reg);
|
|
}
|
|
|
|
static inline void rk_pcie_dbi_write_enable(struct rk_pcie *rk_pcie, bool en)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(rk_pcie->dbi_base + PCIE_MISC_CONTROL_1_OFF);
|
|
|
|
if (en)
|
|
val |= PCIE_DBI_RO_WR_EN;
|
|
else
|
|
val &= ~PCIE_DBI_RO_WR_EN;
|
|
writel(val, rk_pcie->dbi_base + PCIE_MISC_CONTROL_1_OFF);
|
|
}
|
|
|
|
/**
|
|
* rockchip_pcie_setup_host() - Setup the PCIe controller for RC opertaion
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
*
|
|
* Configure the host BARs of the PCIe controller root port so that
|
|
* PCI(e) devices may access the system memory.
|
|
*/
|
|
static void rk_pcie_setup_host(struct rk_pcie *rk_pcie)
|
|
{
|
|
u32 val;
|
|
|
|
rk_pcie_dbi_write_enable(rk_pcie, true);
|
|
|
|
/* setup RC BARs */
|
|
writel(PCI_BASE_ADDRESS_MEM_TYPE_64,
|
|
rk_pcie->dbi_base + PCI_BASE_ADDRESS_0);
|
|
writel(0x0, rk_pcie->dbi_base + PCI_BASE_ADDRESS_1);
|
|
|
|
/* setup interrupt pins */
|
|
clrsetbits_le32(rk_pcie->dbi_base + PCI_INTERRUPT_LINE,
|
|
0xff00, 0x100);
|
|
|
|
/* setup bus numbers */
|
|
clrsetbits_le32(rk_pcie->dbi_base + PCI_PRIMARY_BUS,
|
|
0xffffff, 0x00ff0100);
|
|
|
|
/* setup command register */
|
|
clrsetbits_le32(rk_pcie->dbi_base + PCI_PRIMARY_BUS,
|
|
0xffff,
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
|
|
|
|
/* program correct class for RC */
|
|
writew(PCI_CLASS_BRIDGE_PCI, rk_pcie->dbi_base + PCI_CLASS_DEVICE);
|
|
/* Better disable write permission right after the update */
|
|
|
|
setbits_le32(rk_pcie->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL,
|
|
PORT_LOGIC_SPEED_CHANGE)
|
|
|
|
rk_pcie_dbi_write_enable(rk_pcie, false);
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_configure() - Configure link capabilities and speed
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @cap_speed: The capabilities and speed to configure
|
|
*
|
|
* Configure the link capabilities and speed in the PCIe root complex.
|
|
*/
|
|
static void rk_pcie_configure(struct rk_pcie *pci, u32 cap_speed)
|
|
{
|
|
u32 val;
|
|
|
|
rk_pcie_dbi_write_enable(pci, true);
|
|
|
|
clrsetbits_le32(pci->dbi_base + PCIE_LINK_CAPABILITY,
|
|
TARGET_LINK_SPEED_MASK, cap_speed);
|
|
|
|
clrsetbits_le32(pci->dbi_base + PCIE_LINK_CTL_2,
|
|
TARGET_LINK_SPEED_MASK, cap_speed);
|
|
|
|
rk_pcie_dbi_write_enable(pci, false);
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_dw_prog_outbound_atu_unroll() - Configure ATU for outbound accesses
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @index: ATU region index
|
|
* @type: ATU accsess type
|
|
* @cpu_addr: the physical address for the translation entry
|
|
* @pci_addr: the pcie bus address for the translation entry
|
|
* @size: the size of the translation entry
|
|
*
|
|
* Return: 0 is successful and -1 is failure
|
|
*/
|
|
static int rk_pcie_prog_outbound_atu_unroll(struct rk_pcie *pci, int index,
|
|
int type, u64 cpu_addr,
|
|
u64 pci_addr, u32 size)
|
|
{
|
|
u32 retries, val;
|
|
|
|
dev_dbg(pci->dev, "ATU programmed with: index: %d, type: %d, cpu addr: %8llx, pci addr: %8llx, size: %8x\n",
|
|
index, type, cpu_addr, pci_addr, size);
|
|
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
|
|
lower_32_bits(cpu_addr));
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
|
|
upper_32_bits(cpu_addr));
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
|
|
lower_32_bits(cpu_addr + size - 1));
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
|
|
lower_32_bits(pci_addr));
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
|
|
upper_32_bits(pci_addr));
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
|
|
type);
|
|
rk_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
|
|
PCIE_ATU_ENABLE);
|
|
|
|
/*
|
|
* Make sure ATU enable takes effect before any subsequent config
|
|
* and I/O accesses.
|
|
*/
|
|
for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
|
|
val = rk_pcie_readl_ob_unroll(pci, index,
|
|
PCIE_ATU_UNR_REGION_CTRL2);
|
|
if (val & PCIE_ATU_ENABLE)
|
|
return 0;
|
|
|
|
udelay(LINK_WAIT_IATU_US);
|
|
}
|
|
dev_err(pci->dev, "outbound iATU is not being enabled\n");
|
|
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_dw_addr_valid() - Check for valid bus address
|
|
*
|
|
* @d: The PCI device to access
|
|
* @first_busno: Bus number of the PCIe controller root complex
|
|
*
|
|
* Return 1 (true) if the PCI device can be accessed by this controller.
|
|
*
|
|
* Return: 1 on valid, 0 on invalid
|
|
*/
|
|
static int rk_pcie_addr_valid(pci_dev_t d, int first_busno)
|
|
{
|
|
if ((PCI_BUS(d) == first_busno) && (PCI_DEV(d) > 0))
|
|
return 0;
|
|
if ((PCI_BUS(d) == first_busno + 1) && (PCI_DEV(d) > 0))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* set_cfg_address() - Configure the PCIe controller config space access
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @d: PCI device to access
|
|
* @where: Offset in the configuration space
|
|
*
|
|
* Configures the PCIe controller to access the configuration space of
|
|
* a specific PCIe device and returns the address to use for this
|
|
* access.
|
|
*
|
|
* Return: Address that can be used to access the configation space
|
|
* of the requested device / offset
|
|
*/
|
|
static uintptr_t set_cfg_address(struct rk_pcie *pcie,
|
|
pci_dev_t d, uint where)
|
|
{
|
|
int rel_bus = PCI_BUS(d) - pcie->first_busno;
|
|
uintptr_t va_address;
|
|
u32 atu_type;
|
|
int ret;
|
|
|
|
/* Use dbi_base for own configuration read and write */
|
|
if (!rel_bus) {
|
|
va_address = (uintptr_t)pcie->dbi_base;
|
|
goto out;
|
|
}
|
|
|
|
if (rel_bus == 1)
|
|
/*
|
|
* For local bus whose primary bus number is root bridge,
|
|
* change TLP Type field to 4.
|
|
*/
|
|
atu_type = PCIE_ATU_TYPE_CFG0;
|
|
else
|
|
/* Otherwise, change TLP Type field to 5. */
|
|
atu_type = PCIE_ATU_TYPE_CFG1;
|
|
|
|
/*
|
|
* Not accessing root port configuration space?
|
|
* Region #0 is used for Outbound CFG space access.
|
|
* Direction = Outbound
|
|
* Region Index = 0
|
|
*/
|
|
d = PCI_MASK_BUS(d);
|
|
d = PCI_ADD_BUS(rel_bus, d);
|
|
ret = rk_pcie_prog_outbound_atu_unroll(pcie, PCIE_ATU_REGION_INDEX1,
|
|
atu_type, (u64)pcie->cfg_base,
|
|
d << 8, pcie->cfg_size);
|
|
if (ret)
|
|
return (uintptr_t)ret;
|
|
|
|
va_address = (uintptr_t)pcie->cfg_base;
|
|
|
|
out:
|
|
va_address += where & ~0x3;
|
|
|
|
return va_address;
|
|
}
|
|
|
|
/**
|
|
* rockchip_pcie_rd_conf() - Read from configuration space
|
|
*
|
|
* @bus: Pointer to the PCI bus
|
|
* @bdf: Identifies the PCIe device to access
|
|
* @offset: The offset into the device's configuration space
|
|
* @valuep: A pointer at which to store the read value
|
|
* @size: Indicates the size of access to perform
|
|
*
|
|
* Read a value of size @size from offset @offset within the configuration
|
|
* space of the device identified by the bus, device & function numbers in @bdf
|
|
* on the PCI bus @bus.
|
|
*
|
|
* Return: 0 on success
|
|
*/
|
|
static int rockchip_pcie_rd_conf(const struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong *valuep,
|
|
enum pci_size_t size)
|
|
{
|
|
struct rk_pcie *pcie = dev_get_priv(bus);
|
|
uintptr_t va_address;
|
|
ulong value;
|
|
|
|
debug("PCIE CFG read: bdf=%2x:%2x:%2x\n",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
|
|
if (!rk_pcie_addr_valid(bdf, pcie->first_busno)) {
|
|
debug("- out of range\n");
|
|
*valuep = pci_get_ff(size);
|
|
return 0;
|
|
}
|
|
|
|
va_address = set_cfg_address(pcie, bdf, offset);
|
|
|
|
value = readl(va_address);
|
|
|
|
debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
|
|
*valuep = pci_conv_32_to_size(value, offset, size);
|
|
|
|
return rk_pcie_prog_outbound_atu_unroll(pcie,
|
|
PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_IO,
|
|
pcie->io.phys_start,
|
|
pcie->io.bus_start,
|
|
pcie->io.size);
|
|
}
|
|
|
|
/**
|
|
* rockchip_pcie_wr_conf() - Write to configuration space
|
|
*
|
|
* @bus: Pointer to the PCI bus
|
|
* @bdf: Identifies the PCIe device to access
|
|
* @offset: The offset into the device's configuration space
|
|
* @value: The value to write
|
|
* @size: Indicates the size of access to perform
|
|
*
|
|
* Write the value @value of size @size from offset @offset within the
|
|
* configuration space of the device identified by the bus, device & function
|
|
* numbers in @bdf on the PCI bus @bus.
|
|
*
|
|
* Return: 0 on success
|
|
*/
|
|
static int rockchip_pcie_wr_conf(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
struct rk_pcie *pcie = dev_get_priv(bus);
|
|
uintptr_t va_address;
|
|
ulong old;
|
|
|
|
debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d)\n",
|
|
PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
|
|
debug("(addr,val)=(0x%04x, 0x%08lx)\n", offset, value);
|
|
|
|
if (!rk_pcie_addr_valid(bdf, pcie->first_busno)) {
|
|
debug("- out of range\n");
|
|
return 0;
|
|
}
|
|
|
|
va_address = set_cfg_address(pcie, bdf, offset);
|
|
|
|
old = readl(va_address);
|
|
value = pci_conv_size_to_32(old, value, offset, size);
|
|
writel(value, va_address);
|
|
|
|
return rk_pcie_prog_outbound_atu_unroll(pcie,
|
|
PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_IO,
|
|
pcie->io.phys_start,
|
|
pcie->io.bus_start,
|
|
pcie->io.size);
|
|
|
|
}
|
|
|
|
static void rk_pcie_enable_debug(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D0,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_PTN_HIT_D1,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D0,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_TRN_HIT_D1,
|
|
PCIE_CLIENT_DBG_TRANSITION_DATA);
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_MODE_CON,
|
|
PCIE_CLIENT_DBF_EN);
|
|
}
|
|
|
|
static void rk_pcie_debug_dump(struct rk_pcie *rk_pcie)
|
|
{
|
|
u32 loop;
|
|
|
|
debug("ltssm = 0x%x\n",
|
|
rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_LTSSM_STATUS));
|
|
for (loop = 0; loop < 64; loop++)
|
|
debug("fifo_status = 0x%x\n",
|
|
rk_pcie_readl_apb(rk_pcie, PCIE_CLIENT_DBG_FIFO_STATUS));
|
|
}
|
|
|
|
static inline void rk_pcie_link_status_clear(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, PCIE_CLIENT_GENERAL_DEBUG, 0x0);
|
|
}
|
|
|
|
static inline void rk_pcie_disable_ltssm(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, 0x0, 0xc0008);
|
|
}
|
|
|
|
static inline void rk_pcie_enable_ltssm(struct rk_pcie *rk_pcie)
|
|
{
|
|
rk_pcie_writel_apb(rk_pcie, 0x0, 0xc000c);
|
|
}
|
|
|
|
static int is_link_up(struct rk_pcie *priv)
|
|
{
|
|
u32 val;
|
|
|
|
val = rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS);
|
|
if ((val & (RDLH_LINKUP | SMLH_LINKUP)) == 0x30000 &&
|
|
(val & GENMASK(5, 0)) == 0x11)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rk_pcie_link_up() - Wait for the link to come up
|
|
*
|
|
* @rk_pcie: Pointer to the PCI controller state
|
|
* @cap_speed: Desired link speed
|
|
*
|
|
* Return: 1 (true) for active line and negetive (false) for no link (timeout)
|
|
*/
|
|
static int rk_pcie_link_up(struct rk_pcie *priv, u32 cap_speed)
|
|
{
|
|
int retries;
|
|
|
|
if (is_link_up(priv)) {
|
|
printf("PCI Link already up before configuration!\n");
|
|
return 1;
|
|
}
|
|
|
|
/* DW pre link configurations */
|
|
rk_pcie_configure(priv, cap_speed);
|
|
|
|
/* Rest the device */
|
|
if (dm_gpio_is_valid(&priv->rst_gpio)) {
|
|
dm_gpio_set_value(&priv->rst_gpio, 0);
|
|
/*
|
|
* Minimal is 100ms from spec but we see
|
|
* some wired devices need much more, such as 600ms.
|
|
* Add a enough delay to cover all cases.
|
|
*/
|
|
msleep(PERST_WAIT_MS);
|
|
dm_gpio_set_value(&priv->rst_gpio, 1);
|
|
}
|
|
|
|
rk_pcie_disable_ltssm(priv);
|
|
rk_pcie_link_status_clear(priv);
|
|
rk_pcie_enable_debug(priv);
|
|
|
|
/* Enable LTSSM */
|
|
rk_pcie_enable_ltssm(priv);
|
|
|
|
for (retries = 0; retries < 5; retries++) {
|
|
if (is_link_up(priv)) {
|
|
dev_info(priv->dev, "PCIe Link up, LTSSM is 0x%x\n",
|
|
rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS));
|
|
rk_pcie_debug_dump(priv);
|
|
return 0;
|
|
}
|
|
|
|
dev_info(priv->dev, "PCIe Linking... LTSSM is 0x%x\n",
|
|
rk_pcie_readl_apb(priv, PCIE_CLIENT_LTSSM_STATUS));
|
|
rk_pcie_debug_dump(priv);
|
|
msleep(1000);
|
|
}
|
|
|
|
dev_err(priv->dev, "PCIe-%d Link Fail\n", dev_seq(priv->dev));
|
|
/* Link maybe in Gen switch recovery but we need to wait more 1s */
|
|
msleep(1000);
|
|
return -EIO;
|
|
}
|
|
|
|
static int rockchip_pcie_init_port(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
|
|
/* Set power and maybe external ref clk input */
|
|
if (priv->vpcie3v3) {
|
|
ret = regulator_set_value(priv->vpcie3v3, 3300000);
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed to enable vpcie3v3 (ret=%d)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
msleep(1000);
|
|
|
|
ret = generic_phy_init(&priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to init phy (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = generic_phy_power_on(&priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to power on phy (ret=%d)\n", ret);
|
|
goto err_exit_phy;
|
|
}
|
|
|
|
ret = reset_deassert_bulk(&priv->rsts);
|
|
if (ret) {
|
|
dev_err(dev, "failed to deassert resets (ret=%d)\n", ret);
|
|
goto err_power_off_phy;
|
|
}
|
|
|
|
ret = clk_enable_bulk(&priv->clks);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clks (ret=%d)\n", ret);
|
|
goto err_deassert_bulk;
|
|
}
|
|
|
|
/* LTSSM EN ctrl mode */
|
|
val = rk_pcie_readl_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL);
|
|
val |= PCIE_LTSSM_ENABLE_ENHANCE | (PCIE_LTSSM_ENABLE_ENHANCE << 16);
|
|
rk_pcie_writel_apb(priv, PCIE_CLIENT_HOT_RESET_CTRL, val);
|
|
|
|
/* Set RC mode */
|
|
rk_pcie_writel_apb(priv, 0x0, 0xf00040);
|
|
rk_pcie_setup_host(priv);
|
|
|
|
ret = rk_pcie_link_up(priv, LINK_SPEED_GEN_3);
|
|
if (ret < 0)
|
|
goto err_link_up;
|
|
|
|
return 0;
|
|
err_link_up:
|
|
clk_disable_bulk(&priv->clks);
|
|
err_deassert_bulk:
|
|
reset_assert_bulk(&priv->rsts);
|
|
err_power_off_phy:
|
|
generic_phy_power_off(&priv->phy);
|
|
err_exit_phy:
|
|
generic_phy_exit(&priv->phy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_pcie_parse_dt(struct udevice *dev)
|
|
{
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->dbi_base = (void *)dev_read_addr_index(dev, 0);
|
|
if (!priv->dbi_base)
|
|
return -ENODEV;
|
|
|
|
dev_dbg(dev, "DBI address is 0x%p\n", priv->dbi_base);
|
|
|
|
priv->apb_base = (void *)dev_read_addr_index(dev, 1);
|
|
if (!priv->apb_base)
|
|
return -ENODEV;
|
|
|
|
dev_dbg(dev, "APB address is 0x%p\n", priv->apb_base);
|
|
|
|
ret = gpio_request_by_name(dev, "reset-gpios", 0,
|
|
&priv->rst_gpio, GPIOD_IS_OUT);
|
|
if (ret) {
|
|
dev_err(dev, "failed to find reset-gpios property\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_bulk(dev, &priv->rsts);
|
|
if (ret) {
|
|
dev_err(dev, "Can't get reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_get_bulk(dev, &priv->clks);
|
|
if (ret) {
|
|
dev_err(dev, "Can't get clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = device_get_supply_regulator(dev, "vpcie3v3-supply",
|
|
&priv->vpcie3v3);
|
|
if (ret && ret != -ENOENT) {
|
|
dev_err(dev, "failed to get vpcie3v3 supply (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = generic_phy_get_by_index(dev, 0, &priv->phy);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get pcie phy (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rockchip_pcie_probe() - Probe the PCIe bus for active link
|
|
*
|
|
* @dev: A pointer to the device being operated on
|
|
*
|
|
* Probe for an active link on the PCIe bus and configure the controller
|
|
* to enable this port.
|
|
*
|
|
* Return: 0 on success, else -ENODEV
|
|
*/
|
|
static int rockchip_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct rk_pcie *priv = dev_get_priv(dev);
|
|
struct udevice *ctlr = pci_get_controller(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
int reti = 0;
|
|
|
|
priv->first_busno = dev_seq(dev);
|
|
priv->dev = dev;
|
|
|
|
ret = rockchip_pcie_parse_dt(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_pcie_init_port(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(dev, "PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n",
|
|
dev_seq(dev), rk_pcie_get_link_speed(priv),
|
|
rk_pcie_get_link_width(priv),
|
|
hose->first_busno);
|
|
|
|
for (ret = 0; ret < hose->region_count; ret++) {
|
|
if (hose->regions[ret].flags == PCI_REGION_IO) {
|
|
priv->io.phys_start = hose->regions[ret].phys_start; /* IO base */
|
|
priv->io.bus_start = hose->regions[ret].bus_start; /* IO_bus_addr */
|
|
priv->io.size = hose->regions[ret].size; /* IO size */
|
|
} else if (hose->regions[ret].flags == PCI_REGION_MEM) {
|
|
priv->mem.phys_start = hose->regions[ret].phys_start; /* MEM base */
|
|
priv->mem.bus_start = hose->regions[ret].bus_start; /* MEM_bus_addr */
|
|
priv->mem.size = hose->regions[ret].size; /* MEM size */
|
|
} else if (hose->regions[ret].flags == PCI_REGION_SYS_MEMORY) {
|
|
priv->cfg_base = (void *)(priv->io.phys_start - priv->io.size);
|
|
priv->cfg_size = priv->io.size;
|
|
} else {
|
|
dev_err(dev, "invalid flags type!\n");
|
|
}
|
|
}
|
|
|
|
dev_dbg(dev, "Config space: [0x%p - 0x%p, size 0x%llx]\n",
|
|
priv->cfg_base, priv->cfg_base + priv->cfg_size,
|
|
priv->cfg_size);
|
|
|
|
dev_dbg(dev, "IO space: [0x%llx - 0x%llx, size 0x%lx]\n",
|
|
priv->io.phys_start, priv->io.phys_start + priv->io.size,
|
|
priv->io.size);
|
|
|
|
dev_dbg(dev, "IO bus: [0x%lx - 0x%lx, size 0x%lx]\n",
|
|
priv->io.bus_start, priv->io.bus_start + priv->io.size,
|
|
priv->io.size);
|
|
|
|
dev_dbg(dev, "MEM space: [0x%llx - 0x%llx, size 0x%lx]\n",
|
|
priv->mem.phys_start, priv->mem.phys_start + priv->mem.size,
|
|
priv->mem.size);
|
|
|
|
dev_dbg(dev, "MEM bus: [0x%lx - 0x%lx, size 0x%lx]\n",
|
|
priv->mem.bus_start, priv->mem.bus_start + priv->mem.size,
|
|
priv->mem.size);
|
|
|
|
return rk_pcie_prog_outbound_atu_unroll(priv,
|
|
PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_TYPE_MEM,
|
|
priv->mem.phys_start,
|
|
priv->mem.bus_start,
|
|
priv->mem.size);
|
|
}
|
|
|
|
static const struct dm_pci_ops rockchip_pcie_ops = {
|
|
.read_config = rockchip_pcie_rd_conf,
|
|
.write_config = rockchip_pcie_wr_conf,
|
|
};
|
|
|
|
static const struct udevice_id rockchip_pcie_ids[] = {
|
|
{ .compatible = "rockchip,rk3568-pcie" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_dw_pcie) = {
|
|
.name = "pcie_dw_rockchip",
|
|
.id = UCLASS_PCI,
|
|
.of_match = rockchip_pcie_ids,
|
|
.ops = &rockchip_pcie_ops,
|
|
.probe = rockchip_pcie_probe,
|
|
.priv_auto = sizeof(struct rk_pcie),
|
|
};
|