mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Joe Hershberger](/assets/img/avatar_default.png)
Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
1018 lines
24 KiB
C
1018 lines
24 KiB
C
/*
|
|
* (C) Copyright 2003-2010
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* This file is based on mpc4200fec.c,
|
|
* (C) Copyright Motorola, Inc., 2000
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc5xxx.h>
|
|
#include <mpc5xxx_sdma.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include "mpc5xxx_fec.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* #define DEBUG 0x28 */
|
|
|
|
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
|
|
#error "CONFIG_MII has to be defined!"
|
|
#endif
|
|
|
|
#if (DEBUG & 0x60)
|
|
static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
|
|
static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
|
|
#endif /* DEBUG */
|
|
|
|
typedef struct {
|
|
uint8 data[1500]; /* actual data */
|
|
int length; /* actual length */
|
|
int used; /* buffer in use or not */
|
|
uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
|
|
} NBUF;
|
|
|
|
int fec5xxx_miiphy_read(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 *retVal);
|
|
int fec5xxx_miiphy_write(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
|
|
|
|
static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis);
|
|
|
|
/********************************************************************/
|
|
#if (DEBUG & 0x2)
|
|
static void mpc5xxx_fec_phydump (char *devname)
|
|
{
|
|
uint16 phyStatus, i;
|
|
uint8 phyAddr = CONFIG_PHY_ADDR;
|
|
uint8 reg_mask[] = {
|
|
#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
|
|
/* regs to print: 0...7, 16...19, 21, 23, 24 */
|
|
1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
|
|
#else
|
|
/* regs to print: 0...8, 16...20 */
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
|
|
1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
#endif
|
|
};
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
if (reg_mask[i]) {
|
|
miiphy_read(devname, phyAddr, i, &phyStatus);
|
|
printf("Mii reg %d: 0x%04x\n", i, phyStatus);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/********************************************************************/
|
|
static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec)
|
|
{
|
|
int ix;
|
|
char *data;
|
|
static int once = 0;
|
|
|
|
for (ix = 0; ix < FEC_RBD_NUM; ix++) {
|
|
if (!once) {
|
|
data = (char *)malloc(FEC_MAX_PKT_SIZE);
|
|
if (data == NULL) {
|
|
printf ("RBD INIT FAILED\n");
|
|
return -1;
|
|
}
|
|
fec->rbdBase[ix].dataPointer = (uint32)data;
|
|
}
|
|
fec->rbdBase[ix].status = FEC_RBD_EMPTY;
|
|
fec->rbdBase[ix].dataLength = 0;
|
|
}
|
|
once ++;
|
|
|
|
/*
|
|
* have the last RBD to close the ring
|
|
*/
|
|
fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
|
|
fec->rbdIndex = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec)
|
|
{
|
|
int ix;
|
|
|
|
for (ix = 0; ix < FEC_TBD_NUM; ix++) {
|
|
fec->tbdBase[ix].status = 0;
|
|
}
|
|
|
|
/*
|
|
* Have the last TBD to close the ring
|
|
*/
|
|
fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
|
|
|
|
/*
|
|
* Initialize some indices
|
|
*/
|
|
fec->tbdIndex = 0;
|
|
fec->usedTbdIndex = 0;
|
|
fec->cleanTbdNum = FEC_TBD_NUM;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd)
|
|
{
|
|
/*
|
|
* Reset buffer descriptor as empty
|
|
*/
|
|
if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
|
|
pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
|
|
else
|
|
pRbd->status = FEC_RBD_EMPTY;
|
|
|
|
pRbd->dataLength = 0;
|
|
|
|
/*
|
|
* Now, we have an empty RxBD, restart the SmartDMA receive task
|
|
*/
|
|
SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
|
|
|
|
/*
|
|
* Increment BD count
|
|
*/
|
|
fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec)
|
|
{
|
|
volatile FEC_TBD *pUsedTbd;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
|
|
fec->cleanTbdNum, fec->usedTbdIndex);
|
|
#endif
|
|
|
|
/*
|
|
* process all the consumed TBDs
|
|
*/
|
|
while (fec->cleanTbdNum < FEC_TBD_NUM) {
|
|
pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
|
|
if (pUsedTbd->status & FEC_TBD_READY) {
|
|
#if (DEBUG & 0x20)
|
|
printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum);
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* clean this buffer descriptor
|
|
*/
|
|
if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
|
|
pUsedTbd->status = FEC_TBD_WRAP;
|
|
else
|
|
pUsedTbd->status = 0;
|
|
|
|
/*
|
|
* update some indeces for a correct handling of the TBD ring
|
|
*/
|
|
fec->cleanTbdNum++;
|
|
fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
|
|
}
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac)
|
|
{
|
|
uint8 currByte; /* byte for which to compute the CRC */
|
|
int byte; /* loop - counter */
|
|
int bit; /* loop - counter */
|
|
uint32 crc = 0xffffffff; /* initial value */
|
|
|
|
/*
|
|
* The algorithm used is the following:
|
|
* we loop on each of the six bytes of the provided address,
|
|
* and we compute the CRC by left-shifting the previous
|
|
* value by one position, so that each bit in the current
|
|
* byte of the address may contribute the calculation. If
|
|
* the latter and the MSB in the CRC are different, then
|
|
* the CRC value so computed is also ex-ored with the
|
|
* "polynomium generator". The current byte of the address
|
|
* is also shifted right by one bit at each iteration.
|
|
* This is because the CRC generatore in hardware is implemented
|
|
* as a shift-register with as many ex-ores as the radixes
|
|
* in the polynomium. This suggests that we represent the
|
|
* polynomiumm itself as a 32-bit constant.
|
|
*/
|
|
for (byte = 0; byte < 6; byte++) {
|
|
currByte = mac[byte];
|
|
for (bit = 0; bit < 8; bit++) {
|
|
if ((currByte & 0x01) ^ (crc & 0x01)) {
|
|
crc >>= 1;
|
|
crc = crc ^ 0xedb88320;
|
|
} else {
|
|
crc >>= 1;
|
|
}
|
|
currByte >>= 1;
|
|
}
|
|
}
|
|
|
|
crc = crc >> 26;
|
|
|
|
/*
|
|
* Set individual hash table register
|
|
*/
|
|
if (crc >= 32) {
|
|
fec->eth->iaddr1 = (1 << (crc - 32));
|
|
fec->eth->iaddr2 = 0;
|
|
} else {
|
|
fec->eth->iaddr1 = 0;
|
|
fec->eth->iaddr2 = (1 << crc);
|
|
}
|
|
|
|
/*
|
|
* Set physical address
|
|
*/
|
|
fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
|
|
fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
|
|
{
|
|
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
|
|
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc5xxx_fec_init... Begin\n");
|
|
#endif
|
|
|
|
mpc5xxx_fec_init_phy(dev, bis);
|
|
|
|
/*
|
|
* Call board-specific PHY fixups (if any)
|
|
*/
|
|
#ifdef CONFIG_RESET_PHY_R
|
|
reset_phy();
|
|
#endif
|
|
|
|
/*
|
|
* Initialize RxBD/TxBD rings
|
|
*/
|
|
mpc5xxx_fec_rbd_init(fec);
|
|
mpc5xxx_fec_tbd_init(fec);
|
|
|
|
/*
|
|
* Clear FEC-Lite interrupt event register(IEVENT)
|
|
*/
|
|
fec->eth->ievent = 0xffffffff;
|
|
|
|
/*
|
|
* Set interrupt mask register
|
|
*/
|
|
fec->eth->imask = 0x00000000;
|
|
|
|
/*
|
|
* Set FEC-Lite receive control register(R_CNTRL):
|
|
*/
|
|
if (fec->xcv_type == SEVENWIRE) {
|
|
/*
|
|
* Frame length=1518; 7-wire mode
|
|
*/
|
|
fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
|
|
} else {
|
|
/*
|
|
* Frame length=1518; MII mode;
|
|
*/
|
|
fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
|
|
}
|
|
|
|
fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
|
|
|
|
/*
|
|
* Set Opcode/Pause Duration Register
|
|
*/
|
|
fec->eth->op_pause = 0x00010020; /*FIXME 0xffff0020; */
|
|
|
|
/*
|
|
* Set Rx FIFO alarm and granularity value
|
|
*/
|
|
fec->eth->rfifo_cntrl = 0x0c000000
|
|
| (fec->eth->rfifo_cntrl & ~0x0f000000);
|
|
fec->eth->rfifo_alarm = 0x0000030c;
|
|
#if (DEBUG & 0x22)
|
|
if (fec->eth->rfifo_status & 0x00700000 ) {
|
|
printf("mpc5xxx_fec_init() RFIFO error\n");
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Set Tx FIFO granularity value
|
|
*/
|
|
fec->eth->tfifo_cntrl = 0x0c000000
|
|
| (fec->eth->tfifo_cntrl & ~0x0f000000);
|
|
#if (DEBUG & 0x2)
|
|
printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
|
|
printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
|
|
#endif
|
|
|
|
/*
|
|
* Set transmit fifo watermark register(X_WMRK), default = 64
|
|
*/
|
|
fec->eth->tfifo_alarm = 0x00000080;
|
|
fec->eth->x_wmrk = 0x2;
|
|
|
|
/*
|
|
* Set individual address filter for unicast address
|
|
* and set physical address registers.
|
|
*/
|
|
mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr);
|
|
|
|
/*
|
|
* Set multicast address filter
|
|
*/
|
|
fec->eth->gaddr1 = 0x00000000;
|
|
fec->eth->gaddr2 = 0x00000000;
|
|
|
|
/*
|
|
* Turn ON cheater FSM: ????
|
|
*/
|
|
fec->eth->xmit_fsm = 0x03000000;
|
|
|
|
/*
|
|
* Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't
|
|
* work w/ the current receive task.
|
|
*/
|
|
sdma->PtdCntrl |= 0x00000001;
|
|
|
|
/*
|
|
* Set priority of different initiators
|
|
*/
|
|
sdma->IPR0 = 7; /* always */
|
|
sdma->IPR3 = 6; /* Eth RX */
|
|
sdma->IPR4 = 5; /* Eth Tx */
|
|
|
|
/*
|
|
* Clear SmartDMA task interrupt pending bits
|
|
*/
|
|
SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO);
|
|
|
|
/*
|
|
* Initialize SmartDMA parameters stored in SRAM
|
|
*/
|
|
*(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase;
|
|
*(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase;
|
|
*(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase;
|
|
*(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase;
|
|
|
|
/*
|
|
* Enable FEC-Lite controller
|
|
*/
|
|
fec->eth->ecntrl |= 0x00000006;
|
|
|
|
#if (DEBUG & 0x2)
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
mpc5xxx_fec_phydump (dev->name);
|
|
#endif
|
|
|
|
/*
|
|
* Enable SmartDMA receive task
|
|
*/
|
|
SDMA_TASK_ENABLE(FEC_RECV_TASK_NO);
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf("mpc5xxx_fec_init... Done \n");
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
|
|
{
|
|
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
|
|
const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
|
|
static int initialized = 0;
|
|
|
|
if(initialized)
|
|
return 0;
|
|
initialized = 1;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc5xxx_fec_init_phy... Begin\n");
|
|
#endif
|
|
|
|
/*
|
|
* Initialize GPIO pins
|
|
*/
|
|
if (fec->xcv_type == SEVENWIRE) {
|
|
/* 10MBit with 7-wire operation */
|
|
/* 7-wire only */
|
|
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000;
|
|
} else {
|
|
/* 100MBit with MD operation */
|
|
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000;
|
|
}
|
|
|
|
/*
|
|
* Clear FEC-Lite interrupt event register(IEVENT)
|
|
*/
|
|
fec->eth->ievent = 0xffffffff;
|
|
|
|
/*
|
|
* Set interrupt mask register
|
|
*/
|
|
fec->eth->imask = 0x00000000;
|
|
|
|
/*
|
|
* In original Promess-provided code PHY initialization is disabled with the
|
|
* following comment: "Phy initialization is DISABLED for now. There was a
|
|
* problem with running 100 Mbps on PRO board". Thus we temporarily disable
|
|
* PHY initialization for the Motion-PRO board, until a proper fix is found.
|
|
*/
|
|
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
/*
|
|
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
|
|
* and do not drop the Preamble.
|
|
* No MII for 7-wire mode
|
|
*/
|
|
fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
|
|
}
|
|
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
/*
|
|
* Initialize PHY(LXT971A):
|
|
*
|
|
* Generally, on power up, the LXT971A reads its configuration
|
|
* pins to check for forced operation, If not cofigured for
|
|
* forced operation, it uses auto-negotiation/parallel detection
|
|
* to automatically determine line operating conditions.
|
|
* If the PHY device on the other side of the link supports
|
|
* auto-negotiation, the LXT971A auto-negotiates with it
|
|
* using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
|
|
* support auto-negotiation, the LXT971A automatically detects
|
|
* the presence of either link pulses(10Mbps PHY) or Idle
|
|
* symbols(100Mbps) and sets its operating conditions accordingly.
|
|
*
|
|
* When auto-negotiation is controlled by software, the following
|
|
* steps are recommended.
|
|
*
|
|
* Note:
|
|
* The physical address is dependent on hardware configuration.
|
|
*
|
|
*/
|
|
int timeout = 1;
|
|
uint16 phyStatus;
|
|
|
|
/*
|
|
* Reset PHY, then delay 300ns
|
|
*/
|
|
miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
|
|
udelay(1000);
|
|
|
|
if (fec->xcv_type == MII10) {
|
|
/*
|
|
* Force 10Base-T, FDX operation
|
|
*/
|
|
#if (DEBUG & 0x2)
|
|
printf("Forcing 10 Mbps ethernet link... ");
|
|
#endif
|
|
miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
|
|
/*
|
|
miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100);
|
|
*/
|
|
miiphy_write(dev->name, phyAddr, 0x0, 0x0180);
|
|
|
|
timeout = 20;
|
|
do { /* wait for link status to go down */
|
|
udelay(10000);
|
|
if ((timeout--) == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf("hmmm, should not have waited...");
|
|
#endif
|
|
break;
|
|
}
|
|
miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
|
|
#if (DEBUG & 0x2)
|
|
printf("=");
|
|
#endif
|
|
} while ((phyStatus & 0x0004)); /* !link up */
|
|
|
|
timeout = 1000;
|
|
do { /* wait for link status to come back up */
|
|
udelay(10000);
|
|
if ((timeout--) == 0) {
|
|
printf("failed. Link is down.\n");
|
|
break;
|
|
}
|
|
miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
|
|
#if (DEBUG & 0x2)
|
|
printf("+");
|
|
#endif
|
|
} while (!(phyStatus & 0x0004)); /* !link up */
|
|
|
|
#if (DEBUG & 0x2)
|
|
printf ("done.\n");
|
|
#endif
|
|
} else { /* MII100 */
|
|
/*
|
|
* Set the auto-negotiation advertisement register bits
|
|
*/
|
|
miiphy_write(dev->name, phyAddr, 0x4, 0x01e1);
|
|
|
|
/*
|
|
* Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
|
|
*/
|
|
miiphy_write(dev->name, phyAddr, 0x0, 0x1200);
|
|
|
|
/*
|
|
* Wait for AN completion
|
|
*/
|
|
timeout = 5000;
|
|
do {
|
|
udelay(1000);
|
|
|
|
if ((timeout--) == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf("PHY auto neg 0 failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
|
|
#endif
|
|
return -1;
|
|
}
|
|
} while (!(phyStatus & 0x0004));
|
|
|
|
#if (DEBUG & 0x2)
|
|
printf("PHY auto neg complete! \n");
|
|
#endif
|
|
}
|
|
|
|
}
|
|
|
|
#if (DEBUG & 0x2)
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
mpc5xxx_fec_phydump (dev->name);
|
|
#endif
|
|
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf("mpc5xxx_fec_init_phy... Done \n");
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc5xxx_fec_halt(struct eth_device *dev)
|
|
{
|
|
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
|
|
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
|
|
int counter = 0xffff;
|
|
|
|
#if (DEBUG & 0x2)
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
mpc5xxx_fec_phydump (dev->name);
|
|
#endif
|
|
|
|
/*
|
|
* mask FEC chip interrupts
|
|
*/
|
|
fec->eth->imask = 0;
|
|
|
|
/*
|
|
* issue graceful stop command to the FEC transmitter if necessary
|
|
*/
|
|
fec->eth->x_cntrl |= 0x00000001;
|
|
|
|
/*
|
|
* wait for graceful stop to register
|
|
*/
|
|
while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
|
|
|
|
/*
|
|
* Disable SmartDMA tasks
|
|
*/
|
|
SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
|
|
SDMA_TASK_DISABLE (FEC_RECV_TASK_NO);
|
|
|
|
/*
|
|
* Turn on COMM bus prefetch in the MPC5200 BestComm after we're
|
|
* done. It doesn't work w/ the current receive task.
|
|
*/
|
|
sdma->PtdCntrl &= ~0x00000001;
|
|
|
|
/*
|
|
* Disable the Ethernet Controller
|
|
*/
|
|
fec->eth->ecntrl &= 0xfffffffd;
|
|
|
|
/*
|
|
* Clear FIFO status registers
|
|
*/
|
|
fec->eth->rfifo_status &= 0x00700000;
|
|
fec->eth->tfifo_status &= 0x00700000;
|
|
|
|
fec->eth->reset_cntrl = 0x01000000;
|
|
|
|
/*
|
|
* Issue a reset command to the FEC chip
|
|
*/
|
|
fec->eth->ecntrl |= 0x1;
|
|
|
|
/*
|
|
* wait at least 16 clock cycles
|
|
*/
|
|
udelay(10);
|
|
|
|
/* don't leave the MII speed set to zero */
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
/*
|
|
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
|
|
* and do not drop the Preamble.
|
|
* No MII for 7-wire mode
|
|
*/
|
|
fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
|
|
}
|
|
|
|
#if (DEBUG & 0x3)
|
|
printf("Ethernet task stopped\n");
|
|
#endif
|
|
}
|
|
|
|
#if (DEBUG & 0x60)
|
|
/********************************************************************/
|
|
|
|
static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec)
|
|
{
|
|
uint16 phyAddr = CONFIG_PHY_ADDR;
|
|
uint16 phyStatus;
|
|
|
|
if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
|
|
|| (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
|
|
|
|
miiphy_read(devname, phyAddr, 0x1, &phyStatus);
|
|
printf("\nphyStatus: 0x%04x\n", phyStatus);
|
|
printf("ecntrl: 0x%08x\n", fec->eth->ecntrl);
|
|
printf("ievent: 0x%08x\n", fec->eth->ievent);
|
|
printf("x_status: 0x%08x\n", fec->eth->x_status);
|
|
printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
|
|
|
|
printf(" control 0x%08x\n", fec->eth->tfifo_cntrl);
|
|
printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
|
|
printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
|
|
printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm);
|
|
printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
|
|
printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
|
|
}
|
|
}
|
|
|
|
static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec)
|
|
{
|
|
uint16 phyAddr = CONFIG_PHY_ADDR;
|
|
uint16 phyStatus;
|
|
|
|
if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
|
|
|| (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
|
|
|
|
miiphy_read(devname, phyAddr, 0x1, &phyStatus);
|
|
printf("\nphyStatus: 0x%04x\n", phyStatus);
|
|
printf("ecntrl: 0x%08x\n", fec->eth->ecntrl);
|
|
printf("ievent: 0x%08x\n", fec->eth->ievent);
|
|
printf("x_status: 0x%08x\n", fec->eth->x_status);
|
|
printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
|
|
|
|
printf(" control 0x%08x\n", fec->eth->rfifo_cntrl);
|
|
printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
|
|
printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
|
|
printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm);
|
|
printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
|
|
printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
|
|
}
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
/********************************************************************/
|
|
|
|
static int mpc5xxx_fec_send(struct eth_device *dev, void *eth_data,
|
|
int data_length)
|
|
{
|
|
/*
|
|
* This routine transmits one frame. This routine only accepts
|
|
* 6-byte Ethernet addresses.
|
|
*/
|
|
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
|
|
volatile FEC_TBD *pTbd;
|
|
|
|
#if (DEBUG & 0x20)
|
|
printf("tbd status: 0x%04x\n", fec->tbdBase[0].status);
|
|
tfifo_print(dev->name, fec);
|
|
#endif
|
|
|
|
/*
|
|
* Clear Tx BD ring at first
|
|
*/
|
|
mpc5xxx_fec_tbd_scrub(fec);
|
|
|
|
/*
|
|
* Check for valid length of data.
|
|
*/
|
|
if ((data_length > 1500) || (data_length <= 0)) {
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Check the number of vacant TxBDs.
|
|
*/
|
|
if (fec->cleanTbdNum < 1) {
|
|
#if (DEBUG & 0x20)
|
|
printf("No available TxBDs ...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Get the first TxBD to send the mac header
|
|
*/
|
|
pTbd = &fec->tbdBase[fec->tbdIndex];
|
|
pTbd->dataLength = data_length;
|
|
pTbd->dataPointer = (uint32)eth_data;
|
|
pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
|
|
fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
|
|
|
|
#if (DEBUG & 0x100)
|
|
printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
|
|
#endif
|
|
|
|
/*
|
|
* Kick the MII i/f
|
|
*/
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
uint16 phyStatus;
|
|
miiphy_read(dev->name, 0, 0x1, &phyStatus);
|
|
}
|
|
|
|
/*
|
|
* Enable SmartDMA transmit task
|
|
*/
|
|
|
|
#if (DEBUG & 0x20)
|
|
tfifo_print(dev->name, fec);
|
|
#endif
|
|
SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
|
|
#if (DEBUG & 0x20)
|
|
tfifo_print(dev->name, fec);
|
|
#endif
|
|
#if (DEBUG & 0x8)
|
|
printf( "+" );
|
|
#endif
|
|
|
|
fec->cleanTbdNum -= 1;
|
|
|
|
#if (DEBUG & 0x129) && (DEBUG & 0x80000000)
|
|
printf ("smartDMA ethernet Tx task enabled\n");
|
|
#endif
|
|
/*
|
|
* wait until frame is sent .
|
|
*/
|
|
while (pTbd->status & FEC_TBD_READY) {
|
|
udelay(10);
|
|
#if (DEBUG & 0x8)
|
|
printf ("TDB status = %04x\n", pTbd->status);
|
|
#endif
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/********************************************************************/
|
|
static int mpc5xxx_fec_recv(struct eth_device *dev)
|
|
{
|
|
/*
|
|
* This command pulls one frame from the card
|
|
*/
|
|
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
|
|
volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
|
|
unsigned long ievent;
|
|
int frame_length, len = 0;
|
|
NBUF *frame;
|
|
uchar buff[FEC_MAX_PKT_SIZE];
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex);
|
|
#endif
|
|
#if (DEBUG & 0x8)
|
|
printf( "-" );
|
|
#endif
|
|
|
|
/*
|
|
* Check if any critical events have happened
|
|
*/
|
|
ievent = fec->eth->ievent;
|
|
fec->eth->ievent = ievent;
|
|
if (ievent & 0x20060000) {
|
|
/* BABT, Rx/Tx FIFO errors */
|
|
mpc5xxx_fec_halt(dev);
|
|
mpc5xxx_fec_init(dev, NULL);
|
|
return 0;
|
|
}
|
|
if (ievent & 0x80000000) {
|
|
/* Heartbeat error */
|
|
fec->eth->x_cntrl |= 0x00000001;
|
|
}
|
|
if (ievent & 0x10000000) {
|
|
/* Graceful stop complete */
|
|
if (fec->eth->x_cntrl & 0x00000001) {
|
|
mpc5xxx_fec_halt(dev);
|
|
fec->eth->x_cntrl &= ~0x00000001;
|
|
mpc5xxx_fec_init(dev, NULL);
|
|
}
|
|
}
|
|
|
|
if (!(pRbd->status & FEC_RBD_EMPTY)) {
|
|
if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) &&
|
|
((pRbd->dataLength - 4) > 14)) {
|
|
|
|
/*
|
|
* Get buffer address and size
|
|
*/
|
|
frame = (NBUF *)pRbd->dataPointer;
|
|
frame_length = pRbd->dataLength - 4;
|
|
|
|
#if (DEBUG & 0x20)
|
|
{
|
|
int i;
|
|
printf("recv data hdr:");
|
|
for (i = 0; i < 14; i++)
|
|
printf("%x ", *(frame->head + i));
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
/*
|
|
* Fill the buffer and pass it to upper layers
|
|
*/
|
|
memcpy(buff, frame->head, 14);
|
|
memcpy(buff + 14, frame->data, frame_length);
|
|
net_process_received_packet(buff, frame_length);
|
|
len = frame_length;
|
|
}
|
|
/*
|
|
* Reset buffer descriptor as empty
|
|
*/
|
|
mpc5xxx_fec_rbd_clean(fec, pRbd);
|
|
}
|
|
SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
|
|
return len;
|
|
}
|
|
|
|
|
|
/********************************************************************/
|
|
int mpc5xxx_fec_initialize(bd_t * bis)
|
|
{
|
|
mpc5xxx_fec_priv *fec;
|
|
struct eth_device *dev;
|
|
char *tmp, *end;
|
|
char env_enetaddr[6];
|
|
int i;
|
|
|
|
fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec));
|
|
dev = (struct eth_device *)malloc(sizeof(*dev));
|
|
memset(dev, 0, sizeof *dev);
|
|
|
|
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
|
|
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
|
|
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
|
|
#if defined(CONFIG_MPC5xxx_FEC_MII100)
|
|
fec->xcv_type = MII100;
|
|
#elif defined(CONFIG_MPC5xxx_FEC_MII10)
|
|
fec->xcv_type = MII10;
|
|
#elif defined(CONFIG_MPC5xxx_FEC_SEVENWIRE)
|
|
fec->xcv_type = SEVENWIRE;
|
|
#else
|
|
#error fec->xcv_type not initialized.
|
|
#endif
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
/*
|
|
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
|
|
* and do not drop the Preamble.
|
|
* No MII for 7-wire mode
|
|
*/
|
|
fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
|
|
}
|
|
|
|
dev->priv = (void *)fec;
|
|
dev->iobase = MPC5XXX_FEC;
|
|
dev->init = mpc5xxx_fec_init;
|
|
dev->halt = mpc5xxx_fec_halt;
|
|
dev->send = mpc5xxx_fec_send;
|
|
dev->recv = mpc5xxx_fec_recv;
|
|
|
|
sprintf(dev->name, "FEC");
|
|
eth_register(dev);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
miiphy_register (dev->name,
|
|
fec5xxx_miiphy_read, fec5xxx_miiphy_write);
|
|
#endif
|
|
|
|
/*
|
|
* Try to set the mac address now. The fec mac address is
|
|
* a garbage after reset. When not using fec for booting
|
|
* the Linux fec driver will try to work with this garbage.
|
|
*/
|
|
tmp = getenv("ethaddr");
|
|
if (tmp) {
|
|
for (i=0; i<6; i++) {
|
|
env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
|
|
if (tmp)
|
|
tmp = (*end) ? end+1 : end;
|
|
}
|
|
mpc5xxx_fec_set_hwaddr(fec, env_enetaddr);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* MII-interface related functions */
|
|
/********************************************************************/
|
|
int fec5xxx_miiphy_read(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
|
|
{
|
|
ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
|
|
uint32 reg; /* convenient holder for the PHY register */
|
|
uint32 phy; /* convenient holder for the PHY */
|
|
int timeout = 0xffff;
|
|
|
|
/*
|
|
* reading from any PHY's register is done by properly
|
|
* programming the FEC's MII data register.
|
|
*/
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
|
|
|
|
/*
|
|
* wait for the related interrupt
|
|
*/
|
|
while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
|
|
|
|
if (timeout == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("Read MDIO failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* clear mii interrupt bit
|
|
*/
|
|
eth->ievent = 0x00800000;
|
|
|
|
/*
|
|
* it's now safe to read the PHY's register
|
|
*/
|
|
*retVal = (uint16) eth->mii_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
int fec5xxx_miiphy_write(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
|
|
{
|
|
ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
|
|
uint32 reg; /* convenient holder for the PHY register */
|
|
uint32 phy; /* convenient holder for the PHY */
|
|
int timeout = 0xffff;
|
|
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
|
|
FEC_MII_DATA_TA | phy | reg | data);
|
|
|
|
/*
|
|
* wait for the MII interrupt
|
|
*/
|
|
while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
|
|
|
|
if (timeout == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("Write MDIO failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* clear MII interrupt bit
|
|
*/
|
|
eth->ievent = 0x00800000;
|
|
|
|
return 0;
|
|
}
|