mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-03 08:43:45 +09:00
f4db6c976c
This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Phil Sutter <phil@nwl.cc> Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
143 lines
4.5 KiB
C
143 lines
4.5 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* Header file for the Marvell's Feroceon CPU core.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _MVEBU_SOC_H
|
|
#define _MVEBU_SOC_H
|
|
|
|
#define SOC_MV78260_ID 0x7826
|
|
#define SOC_MV78460_ID 0x7846
|
|
#define SOC_88F6810_ID 0x6810
|
|
#define SOC_88F6820_ID 0x6820
|
|
#define SOC_88F6828_ID 0x6828
|
|
|
|
/* A38x revisions */
|
|
#define MV_88F68XX_Z1_ID 0x0
|
|
#define MV_88F68XX_A0_ID 0x4
|
|
|
|
/* TCLK Core Clock definition */
|
|
#ifndef CONFIG_SYS_TCLK
|
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
#endif
|
|
|
|
/* Armada XP PLL frequency (used for NAND clock generation) */
|
|
#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
|
|
|
|
/* SOC specific definations */
|
|
#define INTREG_BASE 0xd0000000
|
|
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* The SPL U-Boot version still runs with the default
|
|
* address for the internal registers, configured by
|
|
* the BootROM. Only the main U-Boot version uses the
|
|
* new internal register base address, that also is
|
|
* required for the Linux kernel.
|
|
*/
|
|
#define SOC_REGS_PHY_BASE 0xd0000000
|
|
#else
|
|
#define SOC_REGS_PHY_BASE 0xf1000000
|
|
#endif
|
|
#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x)
|
|
|
|
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
|
|
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
|
|
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
|
|
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
|
|
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
|
|
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))
|
|
#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140))
|
|
#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180))
|
|
#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200))
|
|
#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700))
|
|
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
|
|
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
|
|
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
|
|
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
|
|
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
|
|
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
|
|
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
|
|
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
|
|
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
|
|
#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000))
|
|
|
|
#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200))
|
|
#define MBUS_ERR_PROP_EN (1 << 8)
|
|
|
|
#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
|
|
#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
|
|
|
|
#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08)
|
|
#define NAND_EN BIT(0)
|
|
#define NAND_ARBITER_EN BIT(27)
|
|
|
|
#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c)
|
|
#define GE0_PUP_EN BIT(0)
|
|
#define GE1_PUP_EN BIT(1)
|
|
#define LCD_PUP_EN BIT(2)
|
|
#define NAND_PUP_EN BIT(4)
|
|
#define SPI_PUP_EN BIT(5)
|
|
|
|
#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8))
|
|
#define NAND_ECC_DIVCKL_RATIO_OFFS 8
|
|
#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
|
|
|
|
#define SDRAM_MAX_CS 4
|
|
#define SDRAM_ADDR_MASK 0xFF000000
|
|
|
|
/* MVEBU CPU memory windows */
|
|
#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA
|
|
#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE
|
|
#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE
|
|
|
|
/* BootROM error register (also includes some status infos) */
|
|
#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0))
|
|
#define BOOTROM_ERR_MODE_OFFS 28
|
|
#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS)
|
|
#define BOOTROM_ERR_MODE_UART 0x6
|
|
|
|
#if defined(CONFIG_ARMADA_38X)
|
|
/* SAR values for Armada 38x */
|
|
#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600))
|
|
|
|
#define SAR_CPU_FREQ_OFFS 10
|
|
#define SAR_CPU_FREQ_MASK (0x1f << SAR_CPU_FREQ_OFFS)
|
|
#define SAR_BOOT_DEVICE_OFFS 4
|
|
#define SAR_BOOT_DEVICE_MASK (0x1f << SAR_BOOT_DEVICE_OFFS)
|
|
|
|
#define BOOT_DEV_SEL_OFFS 4
|
|
#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS)
|
|
|
|
#define BOOT_FROM_UART 0x28
|
|
#define BOOT_FROM_SPI 0x32
|
|
#define BOOT_FROM_MMC 0x30
|
|
#define BOOT_FROM_MMC_ALT 0x31
|
|
#else
|
|
/* SAR values for Armada XP */
|
|
#define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230))
|
|
#define CONFIG_SAR2_REG (MVEBU_REGISTER(0x18234))
|
|
|
|
#define SAR_CPU_FREQ_OFFS 21
|
|
#define SAR_CPU_FREQ_MASK (0x7 << SAR_CPU_FREQ_OFFS)
|
|
#define SAR_FFC_FREQ_OFFS 24
|
|
#define SAR_FFC_FREQ_MASK (0xf << SAR_FFC_FREQ_OFFS)
|
|
#define SAR2_CPU_FREQ_OFFS 20
|
|
#define SAR2_CPU_FREQ_MASK (0x1 << SAR2_CPU_FREQ_OFFS)
|
|
#define SAR_BOOT_DEVICE_OFFS 5
|
|
#define SAR_BOOT_DEVICE_MASK (0xf << SAR_BOOT_DEVICE_OFFS)
|
|
|
|
#define BOOT_DEV_SEL_OFFS 5
|
|
#define BOOT_DEV_SEL_MASK (0xf << BOOT_DEV_SEL_OFFS)
|
|
|
|
#define BOOT_FROM_UART 0x2
|
|
#define BOOT_FROM_SPI 0x3
|
|
#endif
|
|
|
|
#endif /* _MVEBU_SOC_H */
|