u-boot-brain/board/davinci/da8xxevm/hawkboard_nand_spl.c
Christian Riesch e8c856d288 arm, hawkboard: Use the pinmux configurations defined in the arch tree
The boards in board/davinci/da8xxevm/ define pinmux_config[] vectors
that contain pinmux configurations for emac, uarts, memory controllers...
In an earlier patch such pinmux configurations were added to the arch
tree. This patch makes the hawkboard use these definitions instead of
defining its own.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Syed Mohammed Khasim <sm.khasim@gmail.com>
Cc: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: Heiko Schocher <hs@denx.de>
2011-12-06 23:59:37 +01:00

116 lines
3.4 KiB
C

/*
* Modified for Hawkboard - Syed Mohammed Khasim <khasim@beagleboard.org>
*
* Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. <nsekhar@ti.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
* Copyright (C) 2004 Texas Instruments.
*
* ----------------------------------------------------------------------------
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*/
#include <common.h>
#include <asm/errno.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include <asm/arch/davinci_misc.h>
#include <asm/arch/pinmux_defs.h>
#include <ns16550.h>
#include <nand.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct pinmux_resource pinmuxes[] = {
PINMUX_ITEM(emac_pins_mii),
PINMUX_ITEM(emac_pins_mdio),
PINMUX_ITEM(emifa_pins_cs3),
PINMUX_ITEM(emifa_pins_cs4),
PINMUX_ITEM(emifa_pins_nand),
PINMUX_ITEM(uart2_pins_txrx),
PINMUX_ITEM(uart2_pins_rtscts),
};
static const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_SPI1 }, /* Serial Flash */
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
};
void board_init_f(ulong bootflag)
{
/*
* Kick Registers need to be set to allow access to Pin Mux registers
*/
writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
/* setup the SUSPSRC for ARM to control emulation suspend */
writel(readl(&davinci_syscfg_regs->suspsrc) &
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
DAVINCI_SYSCFG_SUSPSRC_UART2), &davinci_syscfg_regs->suspsrc);
/* Power on required peripherals
* ARM does not have acess by default to PSC0 and PSC1
* assuming here that the DSP bootloader has set the IOPU
* such that PSC access is available to ARM
*/
da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc));
/* configure pinmux settings */
davinci_configure_pin_mux_items(pinmuxes,
ARRAY_SIZE(pinmuxes));
writel(readl(&davinci_uart2_ctrl_regs->pwremu_mgmt) |
(DAVINCI_UART_PWREMU_MGMT_FREE) |
(DAVINCI_UART_PWREMU_MGMT_URRST) |
(DAVINCI_UART_PWREMU_MGMT_UTRST),
&davinci_uart2_ctrl_regs->pwremu_mgmt);
NS16550_init((NS16550_t)(DAVINCI_UART2_BASE),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
puts("Nand boot...\n");
nand_boot();
}
void puts(const char *str)
{
while (*str)
putc(*str++);
}
void putc(char c)
{
if (gd->flags & GD_FLG_SILENT)
return;
if (c == '\n')
NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), '\r');
NS16550_putc((NS16550_t)(DAVINCI_UART2_BASE), c);
}
void hang(void)
{
puts("### ERROR ### Please RESET the board ###\n");
for (;;)
;
}