mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 05:13:21 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
- Cleanup a lot of fix values, and use defines instead. - Also make some values configurable through the board config file. - delete the NAND_SPL code for da850, as it is not used actually - remove the asm code Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
312 lines
9.5 KiB
C
312 lines
9.5 KiB
C
/*
|
|
* SoC-specific lowlevel code for DA850
|
|
*
|
|
* Copyright (C) 2011
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <ns16550.h>
|
|
#include <post.h>
|
|
#include <asm/arch/da850_lowlevel.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/ddr2_defs.h>
|
|
#include <asm/arch/emif_defs.h>
|
|
#include <asm/arch/pll_defs.h>
|
|
|
|
void da850_waitloop(unsigned long loopcnt)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0; i < loopcnt; i++)
|
|
asm(" NOP");
|
|
}
|
|
|
|
int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
|
|
{
|
|
if (reg == davinci_pllc0_regs)
|
|
/* Unlock PLL registers. */
|
|
clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
|
|
|
|
/*
|
|
* Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
|
|
* through MMR
|
|
*/
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLENSRC);
|
|
/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
|
|
clrbits_le32(®->pllctl, PLLCTL_EXTCLKSRC);
|
|
|
|
/* Set PLLEN=0 => PLL BYPASS MODE */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLEN);
|
|
|
|
da850_waitloop(150);
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
/*
|
|
* Select the Clock Mode bit 8 as External Clock or On Chip
|
|
* Oscilator
|
|
*/
|
|
dv_maskbits(®->pllctl, ~PLLCTL_RES_9);
|
|
setbits_le32(®->pllctl,
|
|
(CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
|
|
}
|
|
|
|
/* Clear PLLRST bit to reset the PLL */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Disable the PLL output */
|
|
setbits_le32(®->pllctl, PLLCTL_PLLDIS);
|
|
|
|
/* PLL initialization sequence */
|
|
/*
|
|
* Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
|
|
* power down bit
|
|
*/
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLPWRDN);
|
|
|
|
/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
|
|
clrbits_le32(®->pllctl, PLLCTL_PLLDIS);
|
|
|
|
/* Program the required multiplier value in PLLM */
|
|
writel(pllmult, ®->pllm);
|
|
|
|
/* program the postdiv */
|
|
if (reg == davinci_pllc0_regs)
|
|
writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
|
|
®->postdiv);
|
|
else
|
|
writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
|
|
®->postdiv);
|
|
|
|
/*
|
|
* Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
|
|
* no GO operation is currently in progress
|
|
*/
|
|
while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
|
|
;
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, ®->plldiv3);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, ®->plldiv4);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, ®->plldiv5);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, ®->plldiv6);
|
|
writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, ®->plldiv7);
|
|
} else {
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, ®->plldiv3);
|
|
}
|
|
|
|
/*
|
|
* Set the GOSET bit in PLLCMD to 1 to initiate a new divider
|
|
* transition.
|
|
*/
|
|
setbits_le32(®->pllcmd, PLLCMD_GOSTAT);
|
|
|
|
/*
|
|
* Wait for the GOSTAT bit in PLLSTAT to clear to 0
|
|
* (completion of phase alignment).
|
|
*/
|
|
while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
|
|
;
|
|
|
|
/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
|
|
da850_waitloop(200);
|
|
|
|
/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
|
|
setbits_le32(®->pllctl, PLLCTL_PLLRST);
|
|
|
|
/* Wait for PLL to lock. See PLL spec for PLL lock time */
|
|
da850_waitloop(2400);
|
|
|
|
/*
|
|
* Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
|
|
* mode
|
|
*/
|
|
setbits_le32(®->pllctl, PLLCTL_PLLEN);
|
|
|
|
|
|
/*
|
|
* clear EMIFA and EMIFB clock source settings, let them
|
|
* run off SYSCLK
|
|
*/
|
|
if (reg == davinci_pllc0_regs)
|
|
dv_maskbits(&davinci_syscfg_regs->cfgchip3,
|
|
~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int da850_ddr_setup(void)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Enable the Clock to DDR2/mDDR */
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
|
|
/* Begin VTP Calibration */
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
|
|
/* Polling READY bit to see when VTP calibration is done */
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
while ((tmp & VTP_READY) != VTP_READY)
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
|
|
}
|
|
|
|
writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
|
|
clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
|
|
(1 << DDR_SLEW_CMOSEN_BIT));
|
|
|
|
/*
|
|
* SDRAM Configuration Register (SDCR):
|
|
* First set the BOOTUNLOCK bit to make configuration bits
|
|
* writeable.
|
|
*/
|
|
setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
|
|
|
|
/*
|
|
* Write the new value of these bits and clear BOOTUNLOCK.
|
|
* At the same time, set the TIMUNLOCK bit to allow changing
|
|
* the timing registers
|
|
*/
|
|
tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
|
|
tmp &= ~DV_DDR_BOOTUNLOCK;
|
|
tmp |= DV_DDR_TIMUNLOCK;
|
|
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/* write memory configuration and timing */
|
|
writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
|
|
writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
|
|
writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
|
|
|
|
/* clear the TIMUNLOCK bit and write the value of the CL field */
|
|
tmp &= ~DV_DDR_TIMUNLOCK;
|
|
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
|
|
|
|
/*
|
|
* LPMODEN and MCLKSTOPEN must be set!
|
|
* Without this bits set, PSC don;t switch states !!
|
|
*/
|
|
writel(CONFIG_SYS_DA850_DDR2_SDRCR |
|
|
(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
|
|
(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
|
|
&dv_ddr2_regs_ctrl->sdrcr);
|
|
|
|
/* SyncReset the Clock to EMIF3A SDRAM */
|
|
lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
|
|
/* Enable the Clock to EMIF3A SDRAM */
|
|
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
|
|
|
|
/* disable self refresh */
|
|
clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
|
|
DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
|
|
writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
|
|
unsigned long value)
|
|
{
|
|
clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
|
|
setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void board_gpio_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
/* Unlock kick registers */
|
|
writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
|
|
writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
|
|
|
|
dv_maskbits(&davinci_syscfg_regs->suspsrc,
|
|
CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
|
|
|
|
/* Setup Pinmux */
|
|
da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
|
|
da850_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX1);
|
|
da850_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX2);
|
|
da850_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX3);
|
|
da850_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX4);
|
|
da850_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX5);
|
|
da850_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX6);
|
|
da850_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX7);
|
|
da850_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX8);
|
|
da850_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX9);
|
|
da850_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX10);
|
|
da850_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX11);
|
|
da850_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX12);
|
|
da850_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX13);
|
|
da850_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX14);
|
|
da850_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX15);
|
|
da850_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX16);
|
|
da850_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX17);
|
|
da850_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX18);
|
|
da850_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX19);
|
|
|
|
/* PLL setup */
|
|
da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
|
|
da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
|
|
|
|
/* GPIO setup */
|
|
board_gpio_init();
|
|
|
|
/* setup CSn config */
|
|
#if defined(CONFIG_SYS_DA850_CS2CFG)
|
|
writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
|
|
#endif
|
|
#if defined(CONFIG_SYS_DA850_CS3CFG)
|
|
writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
|
|
#endif
|
|
|
|
lpsc_on(CONFIG_SYS_DA850_LPSC_UART);
|
|
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
|
|
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
|
|
|
|
/*
|
|
* Fix Power and Emulation Management Register
|
|
* see sprufw3a.pdf page 37 Table 24
|
|
*/
|
|
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
|
|
DAVINCI_UART_PWREMU_MGMT_UTRST),
|
|
&davinci_uart2_ctrl_regs->pwremu_mgmt);
|
|
|
|
da850_ddr_setup();
|
|
return 0;
|
|
}
|