brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity
f3ba55235d
u-boot-brain/drivers/net/sunxi_emac.c
Simon Glass a1ca92eaaf dm: eth: Avoid blocking on packet reception 
Some devices can take a long time to work out whether they have a new packet
or now. For example the ASIX USB Ethernet dongle can take 5 seconds to do
this, since it waits until it gets a new packet on the wire before allowing
the USB bulk read packet to be submitted.

At present with driver mode the Ethernet receive code reads 32 packets. This
can take a very long time if we must wait for all 32 packets. The old code
(before driver model) worked by reading a single set of packets from the USB
device, then processing all the packets with in. It would be nice to use
the same behaviour with driver model.

Add a flag to the receive method which indicates that the driver should try
to find a packet if available, by consulting the hardware. When the flag is
not set, it should just return any packet data it has already received. If
there is none, it should return -EAGAIN so that the loop will terminate.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:40 -06:00

588 lines
14 KiB
C
Raw Blame History

/*
* sunxi_emac.c -- Allwinner A10 ethernet driver
*
* (C) Copyright 2012, Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <linux/err.h>
#include <malloc.h>
#include <miiphy.h>
#include <net.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
/* EMAC register */
struct emac_regs {
u32 ctl; /* 0x00 */
u32 tx_mode; /* 0x04 */
u32 tx_flow; /* 0x08 */
u32 tx_ctl0; /* 0x0c */
u32 tx_ctl1; /* 0x10 */
u32 tx_ins; /* 0x14 */
u32 tx_pl0; /* 0x18 */
u32 tx_pl1; /* 0x1c */
u32 tx_sta; /* 0x20 */
u32 tx_io_data; /* 0x24 */
u32 tx_io_data1;/* 0x28 */
u32 tx_tsvl0; /* 0x2c */
u32 tx_tsvh0; /* 0x30 */
u32 tx_tsvl1; /* 0x34 */
u32 tx_tsvh1; /* 0x38 */
u32 rx_ctl; /* 0x3c */
u32 rx_hash0; /* 0x40 */
u32 rx_hash1; /* 0x44 */
u32 rx_sta; /* 0x48 */
u32 rx_io_data; /* 0x4c */
u32 rx_fbc; /* 0x50 */
u32 int_ctl; /* 0x54 */
u32 int_sta; /* 0x58 */
u32 mac_ctl0; /* 0x5c */
u32 mac_ctl1; /* 0x60 */
u32 mac_ipgt; /* 0x64 */
u32 mac_ipgr; /* 0x68 */
u32 mac_clrt; /* 0x6c */
u32 mac_maxf; /* 0x70 */
u32 mac_supp; /* 0x74 */
u32 mac_test; /* 0x78 */
u32 mac_mcfg; /* 0x7c */
u32 mac_mcmd; /* 0x80 */
u32 mac_madr; /* 0x84 */
u32 mac_mwtd; /* 0x88 */
u32 mac_mrdd; /* 0x8c */
u32 mac_mind; /* 0x90 */
u32 mac_ssrr; /* 0x94 */
u32 mac_a0; /* 0x98 */
u32 mac_a1; /* 0x9c */
};
/* SRAMC register */
struct sunxi_sramc_regs {
u32 ctrl0;
u32 ctrl1;
};
/* 0: Disable 1: Aborted frame enable(default) */
#define EMAC_TX_AB_M (0x1 << 0)
/* 0: CPU 1: DMA(default) */
#define EMAC_TX_TM (0x1 << 1)
#define EMAC_TX_SETUP (0)
/* 0: DRQ asserted 1: DRQ automatically(default) */
#define EMAC_RX_DRQ_MODE (0x1 << 1)
/* 0: CPU 1: DMA(default) */
#define EMAC_RX_TM (0x1 << 2)
/* 0: Normal(default) 1: Pass all Frames */
#define EMAC_RX_PA (0x1 << 4)
/* 0: Normal(default) 1: Pass Control Frames */
#define EMAC_RX_PCF (0x1 << 5)
/* 0: Normal(default) 1: Pass Frames with CRC Error */
#define EMAC_RX_PCRCE (0x1 << 6)
/* 0: Normal(default) 1: Pass Frames with Length Error */
#define EMAC_RX_PLE (0x1 << 7)
/* 0: Normal 1: Pass Frames length out of range(default) */
#define EMAC_RX_POR (0x1 << 8)
/* 0: Not accept 1: Accept unicast Packets(default) */
#define EMAC_RX_UCAD (0x1 << 16)
/* 0: Normal(default) 1: DA Filtering */
#define EMAC_RX_DAF (0x1 << 17)
/* 0: Not accept 1: Accept multicast Packets(default) */
#define EMAC_RX_MCO (0x1 << 20)
/* 0: Disable(default) 1: Enable Hash filter */
#define EMAC_RX_MHF (0x1 << 21)
/* 0: Not accept 1: Accept Broadcast Packets(default) */
#define EMAC_RX_BCO (0x1 << 22)
/* 0: Disable(default) 1: Enable SA Filtering */
#define EMAC_RX_SAF (0x1 << 24)
/* 0: Normal(default) 1: Inverse Filtering */
#define EMAC_RX_SAIF (0x1 << 25)
#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
EMAC_RX_MCO | EMAC_RX_BCO)
/* 0: Disable 1: Enable Receive Flow Control(default) */
#define EMAC_MAC_CTL0_RFC (0x1 << 2)
/* 0: Disable 1: Enable Transmit Flow Control(default) */
#define EMAC_MAC_CTL0_TFC (0x1 << 3)
#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
/* 0: Disable 1: Enable MAC Frame Length Checking(default) */
#define EMAC_MAC_CTL1_FLC (0x1 << 1)
/* 0: Disable(default) 1: Enable Huge Frame */
#define EMAC_MAC_CTL1_HF (0x1 << 2)
/* 0: Disable(default) 1: Enable MAC Delayed CRC */
#define EMAC_MAC_CTL1_DCRC (0x1 << 3)
/* 0: Disable 1: Enable MAC CRC(default) */
#define EMAC_MAC_CTL1_CRC (0x1 << 4)
/* 0: Disable 1: Enable MAC PAD Short frames(default) */
#define EMAC_MAC_CTL1_PC (0x1 << 5)
/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */
#define EMAC_MAC_CTL1_VC (0x1 << 6)
/* 0: Disable(default) 1: Enable MAC auto detect Short frames */
#define EMAC_MAC_CTL1_ADP (0x1 << 7)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_PRE (0x1 << 8)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_LPE (0x1 << 9)
/* 0: Disable(default) 1: Enable no back off */
#define EMAC_MAC_CTL1_NB (0x1 << 12)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_BNB (0x1 << 13)
/* 0: Disable(default) 1: Enable */
#define EMAC_MAC_CTL1_ED (0x1 << 14)
#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
EMAC_MAC_CTL1_PC)
#define EMAC_MAC_IPGT 0x15
#define EMAC_MAC_NBTB_IPG1 0xc
#define EMAC_MAC_NBTB_IPG2 0x12
#define EMAC_MAC_CW 0x37
#define EMAC_MAC_RM 0xf
#define EMAC_MAC_MFL 0x0600
/* Receive status */
#define EMAC_CRCERR (0x1 << 4)
#define EMAC_LENERR (0x3 << 5)
#define EMAC_RX_BUFSIZE 2000
struct emac_eth_dev {
struct emac_regs *regs;
struct mii_dev *bus;
struct phy_device *phydev;
int link_printed;
#ifdef CONFIG_DM_ETH
uchar rx_buf[EMAC_RX_BUFSIZE];
#endif
};
struct emac_rxhdr {
s16 rx_len;
u16 rx_status;
};
static void emac_inblk_32bit(void *reg, void *data, int count)
{
int cnt = (count + 3) >> 2;
if (cnt) {
u32 *buf = data;
do {
u32 x = readl(reg);
*buf++ = x;
} while (--cnt);
}
}
static void emac_outblk_32bit(void *reg, void *data, int count)
{
int cnt = (count + 3) >> 2;
if (cnt) {
const u32 *buf = data;
do {
writel(*buf++, reg);
} while (--cnt);
}
}
/* Read a word from phyxcer */
static int emac_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
struct emac_eth_dev *priv = bus->priv;
struct emac_regs *regs = priv->regs;
/* issue the phy address and reg */
writel(addr << 8 | reg, &regs->mac_madr);
/* pull up the phy io line */
writel(0x1, &regs->mac_mcmd);
/* Wait read complete */
mdelay(1);
/* push down the phy io line */
writel(0x0, &regs->mac_mcmd);
/* And read data */
return readl(&regs->mac_mrdd);
}
/* Write a word to phyxcer */
static int emac_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 value)
{
struct emac_eth_dev *priv = bus->priv;
struct emac_regs *regs = priv->regs;
/* issue the phy address and reg */
writel(addr << 8 | reg, &regs->mac_madr);
/* pull up the phy io line */
writel(0x1, &regs->mac_mcmd);
/* Wait write complete */
mdelay(1);
/* push down the phy io line */
writel(0x0, &regs->mac_mcmd);
/* and write data */
writel(value, &regs->mac_mwtd);
return 0;
}
static int sunxi_emac_init_phy(struct emac_eth_dev *priv, void *dev)
{
int ret, mask = 0xffffffff;
#ifdef CONFIG_PHY_ADDR
mask = 1 << CONFIG_PHY_ADDR;
#endif
priv->bus = mdio_alloc();
if (!priv->bus) {
printf("Failed to allocate MDIO bus\n");
return -ENOMEM;
}
priv->bus->read = emac_mdio_read;
priv->bus->write = emac_mdio_write;
priv->bus->priv = priv;
strcpy(priv->bus->name, "emac");
ret = mdio_register(priv->bus);
if (ret)
return ret;
priv->phydev = phy_find_by_mask(priv->bus, mask,
PHY_INTERFACE_MODE_MII);
if (!priv->phydev)
return -ENODEV;
phy_connect_dev(priv->phydev, dev);
phy_config(priv->phydev);
return 0;
}
static void emac_setup(struct emac_eth_dev *priv)
{
struct emac_regs *regs = priv->regs;
u32 reg_val;
/* Set up TX */
writel(EMAC_TX_SETUP, &regs->tx_mode);
/* Set up RX */
writel(EMAC_RX_SETUP, &regs->rx_ctl);
/* Set MAC */
/* Set MAC CTL0 */
writel(EMAC_MAC_CTL0_SETUP, &regs->mac_ctl0);
/* Set MAC CTL1 */
reg_val = 0;
if (priv->phydev->duplex == DUPLEX_FULL)
reg_val = (0x1 << 0);
writel(EMAC_MAC_CTL1_SETUP | reg_val, &regs->mac_ctl1);
/* Set up IPGT */
writel(EMAC_MAC_IPGT, &regs->mac_ipgt);
/* Set up IPGR */
writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), &regs->mac_ipgr);
/* Set up Collison window */
writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), &regs->mac_clrt);
/* Set up Max Frame Length */
writel(EMAC_MAC_MFL, &regs->mac_maxf);
}
static void emac_reset(struct emac_eth_dev *priv)
{
struct emac_regs *regs = priv->regs;
debug("resetting device\n");
/* RESET device */
writel(0, &regs->ctl);
udelay(200);
writel(1, &regs->ctl);
udelay(200);
}
static int _sunxi_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr)
{
struct emac_regs *regs = priv->regs;
int ret;
/* Init EMAC */
/* Flush RX FIFO */
setbits_le32(&regs->rx_ctl, 0x8);
udelay(1);
/* Init MAC */
/* Soft reset MAC */
clrbits_le32(&regs->mac_ctl0, 0x1 << 15);
/* Clear RX counter */
writel(0x0, &regs->rx_fbc);
udelay(1);
/* Set up EMAC */
emac_setup(priv);
writel(enetaddr[0] << 16 | enetaddr[1] << 8 | enetaddr[2],
&regs->mac_a1);
writel(enetaddr[3] << 16 | enetaddr[4] << 8 | enetaddr[5],
&regs->mac_a0);
mdelay(1);
emac_reset(priv);
/* PHY POWER UP */
ret = phy_startup(priv->phydev);
if (ret) {
printf("Could not initialize PHY %s\n",
priv->phydev->dev->name);
return ret;
}
/* Print link status only once */
if (!priv->link_printed) {
printf("ENET Speed is %d Mbps - %s duplex connection\n",
priv->phydev->speed,
priv->phydev->duplex ? "FULL" : "HALF");
priv->link_printed = 1;
}
/* Set EMAC SPEED depend on PHY */
if (priv->phydev->speed == SPEED_100)
setbits_le32(&regs->mac_supp, 1 << 8);
else
clrbits_le32(&regs->mac_supp, 1 << 8);
/* Set duplex depend on phy */
if (priv->phydev->duplex == DUPLEX_FULL)
setbits_le32(&regs->mac_ctl1, 1 << 0);
else
clrbits_le32(&regs->mac_ctl1, 1 << 0);
/* Enable RX/TX */
setbits_le32(&regs->ctl, 0x7);
return 0;
}
static int _sunxi_emac_eth_recv(struct emac_eth_dev *priv, void *packet)
{
struct emac_regs *regs = priv->regs;
struct emac_rxhdr rxhdr;
u32 rxcount;
u32 reg_val;
int rx_len;
int rx_status;
int good_packet;
/* Check packet ready or not */
/* Race warning: The first packet might arrive with
* the interrupts disabled, but the second will fix
*/
rxcount = readl(&regs->rx_fbc);
if (!rxcount) {
/* Had one stuck? */
rxcount = readl(&regs->rx_fbc);
if (!rxcount)
return -EAGAIN;
}
reg_val = readl(&regs->rx_io_data);
if (reg_val != 0x0143414d) {
/* Disable RX */
clrbits_le32(&regs->ctl, 0x1 << 2);
/* Flush RX FIFO */
setbits_le32(&regs->rx_ctl, 0x1 << 3);
while (readl(&regs->rx_ctl) & (0x1 << 3))
;
/* Enable RX */
setbits_le32(&regs->ctl, 0x1 << 2);
return -EAGAIN;
}
/* A packet ready now
* Get status/length
*/
good_packet = 1;
emac_inblk_32bit(&regs->rx_io_data, &rxhdr, sizeof(rxhdr));
rx_len = rxhdr.rx_len;
rx_status = rxhdr.rx_status;
/* Packet Status check */
if (rx_len < 0x40) {
good_packet = 0;
debug("RX: Bad Packet (runt)\n");
}
/* rx_status is identical to RSR register. */
if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
good_packet = 0;
if (rx_status & EMAC_CRCERR)
printf("crc error\n");
if (rx_status & EMAC_LENERR)
printf("length error\n");
}
/* Move data from EMAC */
if (good_packet) {
if (rx_len > EMAC_RX_BUFSIZE) {
printf("Received packet is too big (len=%d)\n", rx_len);
return -EMSGSIZE;
}
emac_inblk_32bit((void *)&regs->rx_io_data, packet, rx_len);
return rx_len;
}
return -EIO; /* Bad packet */
}
static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet,
int len)
{
struct emac_regs *regs = priv->regs;
/* Select channel 0 */
writel(0, &regs->tx_ins);
/* Write packet */
emac_outblk_32bit((void *)&regs->tx_io_data, packet, len);
/* Set TX len */
writel(len, &regs->tx_pl0);
/* Start translate from fifo to phy */
setbits_le32(&regs->tx_ctl0, 1);
return 0;
}
static void sunxi_emac_board_setup(struct emac_eth_dev *priv)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_sramc_regs *sram =
(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
struct emac_regs *regs = priv->regs;
int pin;
/* Map SRAM to EMAC */
setbits_le32(&sram->ctrl1, 0x5 << 2);
/* Configure pin mux settings for MII Ethernet */
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC);
/* Set up clock gating */
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
/* Set MII clock */
clrsetbits_le32(&regs->mac_mcfg, 0xf << 2, 0xd << 2);
}
static int sunxi_emac_eth_start(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
return _sunxi_emac_eth_init(dev->priv, pdata->enetaddr);
}
static int sunxi_emac_eth_send(struct udevice *dev, void *packet, int length)
{
struct emac_eth_dev *priv = dev_get_priv(dev);
return _sunxi_emac_eth_send(priv, packet, length);
}
static int sunxi_emac_eth_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct emac_eth_dev *priv = dev_get_priv(dev);
int rx_len;
rx_len = _sunxi_emac_eth_recv(priv, priv->rx_buf);
*packetp = priv->rx_buf;
return rx_len;
}
static void sunxi_emac_eth_stop(struct udevice *dev)
{
/* Nothing to do here */
}
static int sunxi_emac_eth_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct emac_eth_dev *priv = dev_get_priv(dev);
priv->regs = (struct emac_regs *)pdata->iobase;
sunxi_emac_board_setup(priv);
return sunxi_emac_init_phy(priv, dev);
}
static const struct eth_ops sunxi_emac_eth_ops = {
.start = sunxi_emac_eth_start,
.send = sunxi_emac_eth_send,
.recv = sunxi_emac_eth_recv,
.stop = sunxi_emac_eth_stop,
};
static int sunxi_emac_eth_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
pdata->iobase = dev_get_addr(dev);
return 0;
}
static const struct udevice_id sunxi_emac_eth_ids[] = {
{ .compatible = "allwinner,sun4i-a10-emac" },
{ }
};
U_BOOT_DRIVER(eth_sunxi_emac) = {
.name = "eth_sunxi_emac",
.id = UCLASS_ETH,
.of_match = sunxi_emac_eth_ids,
.ofdata_to_platdata = sunxi_emac_eth_ofdata_to_platdata,
.probe = sunxi_emac_eth_probe,
.ops = &sunxi_emac_eth_ops,
.priv_auto_alloc_size = sizeof(struct emac_eth_dev),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};
Reference in New Issue View Git Blame Copy Permalink