mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-09 20:56:16 +09:00
6f6b7cfa89
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
82 lines
2.1 KiB
Plaintext
82 lines
2.1 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_OMAP2PLUS=y
|
|
CONFIG_SYS_TEXT_BASE=0x80100000
|
|
CONFIG_TARGET_OMAP3_BEAGLE=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_SPL=y
|
|
# CONFIG_SPL_EXT_SUPPORT is not set
|
|
CONFIG_SPL_MTD_SUPPORT=y
|
|
CONFIG_SPL_OS_BOOT=y
|
|
CONFIG_SYS_PROMPT="BeagleBoard # "
|
|
CONFIG_FASTBOOT=y
|
|
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
|
CONFIG_CMD_SPL=y
|
|
CONFIG_CMD_SPL_NAND_OFS=0x280000
|
|
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
|
CONFIG_CMD_ASKENV=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_NAND_TRIMFFS=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FS_UUID=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
# CONFIG_ISO_PARTITION is not set
|
|
# CONFIG_EFI_PARTITION is not set
|
|
CONFIG_SPL_PARTITION_UUIDS=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_LED_STATUS=y
|
|
CONFIG_LED_STATUS0=y
|
|
CONFIG_LED_STATUS_BIT=1
|
|
CONFIG_LED_STATUS_STATE=2
|
|
CONFIG_LED_STATUS1=y
|
|
CONFIG_LED_STATUS_BIT1=2
|
|
CONFIG_LED_STATUS_STATE1=2
|
|
CONFIG_LED_STATUS_BOOT_ENABLE=y
|
|
CONFIG_LED_STATUS_BOOT=1
|
|
CONFIG_LED_STATUS_GREEN_ENABLE=y
|
|
CONFIG_LED_STATUS_GREEN=2
|
|
CONFIG_LED_STATUS_CMD=y
|
|
CONFIG_MMC_OMAP_HS=y
|
|
CONFIG_NAND=y
|
|
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
|
|
CONFIG_SPL_NAND_SIMPLE=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_OMAP3_SPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OMAP3=y
|
|
CONFIG_USB_MUSB_GADGET=y
|
|
CONFIG_USB_MUSB_OMAP2PLUS=y
|
|
CONFIG_TWL4030_USB=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="TI"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
|
|
CONFIG_USB_ETHER=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_FAT_WRITE=y
|
|
CONFIG_BCH=y
|
|
CONFIG_SPL_OF_LIBFDT=y
|
|
# CONFIG_EFI_LOADER is not set
|