u-boot-brain/drivers/firmware/firmware-zynqmp.c
Michal Simek 4c86e0834a firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()
There is no need to panic all the time when pmufw config object loading
failed. The patch improves function logic to report permission deny case
and also panic only for SPL case.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
2020-06-24 13:07:57 +02:00

206 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Xilinx Zynq MPSoC Firmware driver
*
* Copyright (C) 2018-2019 Xilinx, Inc.
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <zynqmp_firmware.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
#if defined(CONFIG_ZYNQMP_IPI)
#include <mailbox.h>
#include <asm/arch/sys_proto.h>
#define PMUFW_PAYLOAD_ARG_CNT 8
#define XST_PM_NO_ACCESS 2002L
struct zynqmp_power {
struct mbox_chan tx_chan;
struct mbox_chan rx_chan;
} zynqmp_power;
static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
{
struct zynqmp_ipi_msg msg;
int ret;
if (req_len > PMUFW_PAYLOAD_ARG_CNT ||
res_maxlen > PMUFW_PAYLOAD_ARG_CNT)
return -EINVAL;
if (!(zynqmp_power.tx_chan.dev) || !(&zynqmp_power.rx_chan.dev))
return -EINVAL;
msg.buf = (u32 *)req;
msg.len = req_len;
ret = mbox_send(&zynqmp_power.tx_chan, &msg);
if (ret) {
debug("%s: Sending message failed\n", __func__);
return ret;
}
msg.buf = res;
msg.len = res_maxlen;
ret = mbox_recv(&zynqmp_power.rx_chan, &msg, 100);
if (ret)
debug("%s: Receiving message failed\n", __func__);
return ret;
}
static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
{
if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3)
return ipi_req(req, req_len, res, res_maxlen);
return xilinx_pm_request(req[0], 0, 0, 0, 0, res);
}
unsigned int zynqmp_firmware_version(void)
{
int ret;
u32 ret_payload[PAYLOAD_ARG_CNT];
static u32 pm_api_version = ZYNQMP_PM_VERSION_INVALID;
/*
* Get PMU version only once and later
* just return stored values instead of
* asking PMUFW again.
**/
if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) {
const u32 request[] = { PM_GET_API_VERSION };
ret = send_req(request, ARRAY_SIZE(request), ret_payload, 2);
if (ret)
panic("PMUFW is not found - Please load it!\n");
pm_api_version = ret_payload[1];
if (pm_api_version < ZYNQMP_PM_VERSION)
panic("PMUFW version error. Expected: v%d.%d\n",
ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR);
}
return pm_api_version;
};
/**
* Send a configuration object to the PMU firmware.
*
* @cfg_obj: Pointer to the configuration object
* @size: Size of @cfg_obj in bytes
*/
void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size)
{
const u32 request[] = {
PM_SET_CONFIGURATION,
(u32)((u64)cfg_obj)
};
u32 response = 0;
int err;
printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);
err = send_req(request, ARRAY_SIZE(request), &response, 1);
if (err == XST_PM_NO_ACCESS) {
printf("PMUFW no permission to change config object\n");
return;
}
if (err)
printf("Cannot load PMUFW configuration object (%d)\n", err);
if (response)
printf("PMUFW returned 0x%08x status!\n", response);
if ((err || response) && IS_ENABLED(CONFIG_SPL_BUILD))
panic("PMUFW config object loading failed in EL3\n");
}
static int zynqmp_power_probe(struct udevice *dev)
{
int ret;
debug("%s, (dev=%p)\n", __func__, dev);
ret = mbox_get_by_name(dev, "tx", &zynqmp_power.tx_chan);
if (ret) {
debug("%s: Cannot find tx mailbox\n", __func__);
return ret;
}
ret = mbox_get_by_name(dev, "rx", &zynqmp_power.rx_chan);
if (ret) {
debug("%s: Cannot find rx mailbox\n", __func__);
return ret;
}
ret = zynqmp_firmware_version();
printf("PMUFW:\tv%d.%d\n",
ret >> ZYNQMP_PM_VERSION_MAJOR_SHIFT,
ret & ZYNQMP_PM_VERSION_MINOR_MASK);
return 0;
};
static const struct udevice_id zynqmp_power_ids[] = {
{ .compatible = "xlnx,zynqmp-power" },
{ }
};
U_BOOT_DRIVER(zynqmp_power) = {
.name = "zynqmp_power",
.id = UCLASS_FIRMWARE,
.of_match = zynqmp_power_ids,
.probe = zynqmp_power_probe,
};
#endif
int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2,
u32 arg3, u32 *ret_payload)
{
/*
* Added SIP service call Function Identifier
* Make sure to stay in x0 register
*/
struct pt_regs regs;
if (current_el() == 3) {
printf("%s: Can't call SMC from EL3 context\n", __func__);
return -EPERM;
}
regs.regs[0] = PM_SIP_SVC | api_id;
regs.regs[1] = ((u64)arg1 << 32) | arg0;
regs.regs[2] = ((u64)arg3 << 32) | arg2;
smc_call(&regs);
if (ret_payload) {
ret_payload[0] = (u32)regs.regs[0];
ret_payload[1] = upper_32_bits(regs.regs[0]);
ret_payload[2] = (u32)regs.regs[1];
ret_payload[3] = upper_32_bits(regs.regs[1]);
ret_payload[4] = (u32)regs.regs[2];
}
return regs.regs[0];
}
static const struct udevice_id zynqmp_firmware_ids[] = {
{ .compatible = "xlnx,zynqmp-firmware" },
{ .compatible = "xlnx,versal-firmware"},
{ }
};
U_BOOT_DRIVER(zynqmp_firmware) = {
.id = UCLASS_FIRMWARE,
.name = "zynqmp-firmware",
.of_match = zynqmp_firmware_ids,
};