u-boot-brain/drivers/ddr/imx/imx8m
Sherry Sun f3acb02386 drivers: ddr: imx8mp: Add inline ECC feature support
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC".
This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and
DDR3L). When this feature is enabled by software, the DRAM Controller
reserves 12.5% of DRAM capacity for ECC information, and presents only
the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to
the rest of the SoC.
The DRAM memory can be divided into 8 regions so that if a use case only
requires ECC protection on a subset of memory, then only that subset of
memory need support inline ECC. If this occurs, then there is no
performance penalty accessing the non-ECC-protected memory (no need to
access ECC for this portion of the memory map). This is all configured
with the DRAM Controller.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14 15:23:46 +08:00
..
ddr_init.c drivers: ddr: imx8mp: Add inline ECC feature support 2020-07-14 15:23:46 +08:00
ddrphy_csr.c drivers: ddr: introduce DDR driver for i.MX8M 2019-01-01 14:12:18 +01:00
ddrphy_train.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
ddrphy_utils.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
helper.c common: Drop log.h from common header 2020-05-18 21:19:18 -04:00
Kconfig drivers: ddr: imx8mp: Add inline ECC feature support 2020-07-14 15:23:46 +08:00
Makefile driver: ddr: Refine the ddr init driver on imx8m 2019-10-08 16:36:37 +02:00