u-boot-brain/include/configs/rk3399_common.h
Jagan Teki f263b860ac rk3399: Enable SF distro bootcmd
Enable SPI flash(SF) distro boot command in rk3399.

This distro boot will read the boot script at specific
location at the flash and start sourcing the same.

Included the SF device at the last of the target devices
list since all the rest of the devices on the list have
more possibility to boot the distribution due to the
size of the SPI flash is concern.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30 22:33:31 +05:30

79 lines
2.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*/
#ifndef __CONFIG_RK3399_COMMON_H
#define __CONFIG_RK3399_COMMON_H
#include "rockchip-common.h"
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COUNTER_FREQUENCY 24000000
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff8680a0
#define CONFIG_IRAM_BASE 0xff8c0000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SPL_MAX_SIZE 0x40000
#define CONFIG_SPL_BSS_START_ADDR 0x00400000
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
#else
#define CONFIG_SPL_STACK 0xff8effff
#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
/* BSS setup */
#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
#endif
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* MMC/SD IP block */
#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
/* RAW SD card / eMMC locations. */
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf8000000
#ifndef CONFIG_SPL_BUILD
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00500000\0" \
"script_offset_f=0xffe000\0" \
"script_size_f=0x2000\0" \
"pxefile_addr_r=0x00600000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02080000\0" \
"ramdisk_addr_r=0x06000000\0"
#ifndef ROCKCHIP_DEVICE_SETTINGS
#define ROCKCHIP_DEVICE_SETTINGS
#endif
#include <config_distro_bootcmd.h>
#include <environment/distro/sf.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV \
"altbootcmd=" \
"setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \
"run distro_bootcmd\0"
#endif
/* enable usb config for usb ether */
#endif