mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
649 lines
15 KiB
C
649 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016
|
|
*
|
|
* Michael Kurz, <michi.kurz@gmail.com>
|
|
*
|
|
* STM32 QSPI driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <clk.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct stm32_qspi_regs {
|
|
u32 cr; /* 0x00 */
|
|
u32 dcr; /* 0x04 */
|
|
u32 sr; /* 0x08 */
|
|
u32 fcr; /* 0x0C */
|
|
u32 dlr; /* 0x10 */
|
|
u32 ccr; /* 0x14 */
|
|
u32 ar; /* 0x18 */
|
|
u32 abr; /* 0x1C */
|
|
u32 dr; /* 0x20 */
|
|
u32 psmkr; /* 0x24 */
|
|
u32 psmar; /* 0x28 */
|
|
u32 pir; /* 0x2C */
|
|
u32 lptr; /* 0x30 */
|
|
};
|
|
|
|
/*
|
|
* QUADSPI control register
|
|
*/
|
|
#define STM32_QSPI_CR_EN BIT(0)
|
|
#define STM32_QSPI_CR_ABORT BIT(1)
|
|
#define STM32_QSPI_CR_DMAEN BIT(2)
|
|
#define STM32_QSPI_CR_TCEN BIT(3)
|
|
#define STM32_QSPI_CR_SSHIFT BIT(4)
|
|
#define STM32_QSPI_CR_DFM BIT(6)
|
|
#define STM32_QSPI_CR_FSEL BIT(7)
|
|
#define STM32_QSPI_CR_FTHRES_MASK GENMASK(4, 0)
|
|
#define STM32_QSPI_CR_FTHRES_SHIFT (8)
|
|
#define STM32_QSPI_CR_TEIE BIT(16)
|
|
#define STM32_QSPI_CR_TCIE BIT(17)
|
|
#define STM32_QSPI_CR_FTIE BIT(18)
|
|
#define STM32_QSPI_CR_SMIE BIT(19)
|
|
#define STM32_QSPI_CR_TOIE BIT(20)
|
|
#define STM32_QSPI_CR_APMS BIT(22)
|
|
#define STM32_QSPI_CR_PMM BIT(23)
|
|
#define STM32_QSPI_CR_PRESCALER_MASK GENMASK(7, 0)
|
|
#define STM32_QSPI_CR_PRESCALER_SHIFT (24)
|
|
|
|
/*
|
|
* QUADSPI device configuration register
|
|
*/
|
|
#define STM32_QSPI_DCR_CKMODE BIT(0)
|
|
#define STM32_QSPI_DCR_CSHT_MASK GENMASK(2, 0)
|
|
#define STM32_QSPI_DCR_CSHT_SHIFT (8)
|
|
#define STM32_QSPI_DCR_FSIZE_MASK GENMASK(4, 0)
|
|
#define STM32_QSPI_DCR_FSIZE_SHIFT (16)
|
|
|
|
/*
|
|
* QUADSPI status register
|
|
*/
|
|
#define STM32_QSPI_SR_TEF BIT(0)
|
|
#define STM32_QSPI_SR_TCF BIT(1)
|
|
#define STM32_QSPI_SR_FTF BIT(2)
|
|
#define STM32_QSPI_SR_SMF BIT(3)
|
|
#define STM32_QSPI_SR_TOF BIT(4)
|
|
#define STM32_QSPI_SR_BUSY BIT(5)
|
|
#define STM32_QSPI_SR_FLEVEL_MASK GENMASK(5, 0)
|
|
#define STM32_QSPI_SR_FLEVEL_SHIFT (8)
|
|
|
|
/*
|
|
* QUADSPI flag clear register
|
|
*/
|
|
#define STM32_QSPI_FCR_CTEF BIT(0)
|
|
#define STM32_QSPI_FCR_CTCF BIT(1)
|
|
#define STM32_QSPI_FCR_CSMF BIT(3)
|
|
#define STM32_QSPI_FCR_CTOF BIT(4)
|
|
|
|
/*
|
|
* QUADSPI communication configuration register
|
|
*/
|
|
#define STM32_QSPI_CCR_DDRM BIT(31)
|
|
#define STM32_QSPI_CCR_DHHC BIT(30)
|
|
#define STM32_QSPI_CCR_SIOO BIT(28)
|
|
#define STM32_QSPI_CCR_FMODE_SHIFT (26)
|
|
#define STM32_QSPI_CCR_DMODE_SHIFT (24)
|
|
#define STM32_QSPI_CCR_DCYC_SHIFT (18)
|
|
#define STM32_QSPI_CCR_DCYC_MASK GENMASK(4, 0)
|
|
#define STM32_QSPI_CCR_ABSIZE_SHIFT (16)
|
|
#define STM32_QSPI_CCR_ABMODE_SHIFT (14)
|
|
#define STM32_QSPI_CCR_ADSIZE_SHIFT (12)
|
|
#define STM32_QSPI_CCR_ADMODE_SHIFT (10)
|
|
#define STM32_QSPI_CCR_IMODE_SHIFT (8)
|
|
#define STM32_QSPI_CCR_INSTRUCTION_MASK GENMASK(7, 0)
|
|
|
|
enum STM32_QSPI_CCR_IMODE {
|
|
STM32_QSPI_CCR_IMODE_NONE = 0,
|
|
STM32_QSPI_CCR_IMODE_ONE_LINE = 1,
|
|
STM32_QSPI_CCR_IMODE_TWO_LINE = 2,
|
|
STM32_QSPI_CCR_IMODE_FOUR_LINE = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_ADMODE {
|
|
STM32_QSPI_CCR_ADMODE_NONE = 0,
|
|
STM32_QSPI_CCR_ADMODE_ONE_LINE = 1,
|
|
STM32_QSPI_CCR_ADMODE_TWO_LINE = 2,
|
|
STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_ADSIZE {
|
|
STM32_QSPI_CCR_ADSIZE_8BIT = 0,
|
|
STM32_QSPI_CCR_ADSIZE_16BIT = 1,
|
|
STM32_QSPI_CCR_ADSIZE_24BIT = 2,
|
|
STM32_QSPI_CCR_ADSIZE_32BIT = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_ABMODE {
|
|
STM32_QSPI_CCR_ABMODE_NONE = 0,
|
|
STM32_QSPI_CCR_ABMODE_ONE_LINE = 1,
|
|
STM32_QSPI_CCR_ABMODE_TWO_LINE = 2,
|
|
STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_ABSIZE {
|
|
STM32_QSPI_CCR_ABSIZE_8BIT = 0,
|
|
STM32_QSPI_CCR_ABSIZE_16BIT = 1,
|
|
STM32_QSPI_CCR_ABSIZE_24BIT = 2,
|
|
STM32_QSPI_CCR_ABSIZE_32BIT = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_DMODE {
|
|
STM32_QSPI_CCR_DMODE_NONE = 0,
|
|
STM32_QSPI_CCR_DMODE_ONE_LINE = 1,
|
|
STM32_QSPI_CCR_DMODE_TWO_LINE = 2,
|
|
STM32_QSPI_CCR_DMODE_FOUR_LINE = 3,
|
|
};
|
|
|
|
enum STM32_QSPI_CCR_FMODE {
|
|
STM32_QSPI_CCR_IND_WRITE = 0,
|
|
STM32_QSPI_CCR_IND_READ = 1,
|
|
STM32_QSPI_CCR_AUTO_POLL = 2,
|
|
STM32_QSPI_CCR_MEM_MAP = 3,
|
|
};
|
|
|
|
/* default SCK frequency, unit: HZ */
|
|
#define STM32_QSPI_DEFAULT_SCK_FREQ 108000000
|
|
|
|
struct stm32_qspi_platdata {
|
|
u32 base;
|
|
u32 memory_map;
|
|
u32 max_hz;
|
|
};
|
|
|
|
struct stm32_qspi_priv {
|
|
struct stm32_qspi_regs *regs;
|
|
ulong clock_rate;
|
|
u32 max_hz;
|
|
u32 mode;
|
|
|
|
u32 command;
|
|
u32 address;
|
|
u32 dummycycles;
|
|
#define CMD_HAS_ADR BIT(24)
|
|
#define CMD_HAS_DUMMY BIT(25)
|
|
#define CMD_HAS_DATA BIT(26)
|
|
};
|
|
|
|
static void _stm32_qspi_disable(struct stm32_qspi_priv *priv)
|
|
{
|
|
clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
|
|
}
|
|
|
|
static void _stm32_qspi_enable(struct stm32_qspi_priv *priv)
|
|
{
|
|
setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
|
|
}
|
|
|
|
static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv)
|
|
{
|
|
while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY)
|
|
;
|
|
}
|
|
|
|
static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv)
|
|
{
|
|
while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF))
|
|
;
|
|
}
|
|
|
|
static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv)
|
|
{
|
|
while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF))
|
|
;
|
|
}
|
|
|
|
static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size)
|
|
{
|
|
u32 fsize = fls(size) - 1;
|
|
clrsetbits_le32(&priv->regs->dcr,
|
|
STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT,
|
|
fsize << STM32_QSPI_DCR_FSIZE_SHIFT);
|
|
}
|
|
|
|
static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv)
|
|
{
|
|
unsigned int ccr_reg = 0;
|
|
u8 imode, admode, dmode;
|
|
u32 mode = priv->mode;
|
|
u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK);
|
|
|
|
imode = STM32_QSPI_CCR_IMODE_ONE_LINE;
|
|
admode = STM32_QSPI_CCR_ADMODE_ONE_LINE;
|
|
|
|
if (mode & SPI_RX_QUAD) {
|
|
dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE;
|
|
if (mode & SPI_TX_QUAD) {
|
|
imode = STM32_QSPI_CCR_IMODE_FOUR_LINE;
|
|
admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE;
|
|
}
|
|
} else if (mode & SPI_RX_DUAL) {
|
|
dmode = STM32_QSPI_CCR_DMODE_TWO_LINE;
|
|
if (mode & SPI_TX_DUAL) {
|
|
imode = STM32_QSPI_CCR_IMODE_TWO_LINE;
|
|
admode = STM32_QSPI_CCR_ADMODE_TWO_LINE;
|
|
}
|
|
} else {
|
|
dmode = STM32_QSPI_CCR_DMODE_ONE_LINE;
|
|
}
|
|
|
|
if (priv->command & CMD_HAS_DATA)
|
|
ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT);
|
|
|
|
if (priv->command & CMD_HAS_DUMMY)
|
|
ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK)
|
|
<< STM32_QSPI_CCR_DCYC_SHIFT);
|
|
|
|
if (priv->command & CMD_HAS_ADR) {
|
|
ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT
|
|
<< STM32_QSPI_CCR_ADSIZE_SHIFT);
|
|
ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT);
|
|
}
|
|
ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT);
|
|
ccr_reg |= cmd;
|
|
return ccr_reg;
|
|
}
|
|
|
|
static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv,
|
|
struct spi_flash *flash)
|
|
{
|
|
priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA
|
|
| CMD_HAS_DUMMY;
|
|
priv->dummycycles = flash->dummy_byte * 8;
|
|
|
|
unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv);
|
|
ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT);
|
|
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
|
|
writel(ccr_reg, &priv->regs->ccr);
|
|
|
|
priv->dummycycles = 0;
|
|
}
|
|
|
|
static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv)
|
|
{
|
|
setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT);
|
|
}
|
|
|
|
static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv,
|
|
u32 length)
|
|
{
|
|
writel(length - 1, &priv->regs->dlr);
|
|
}
|
|
|
|
static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg)
|
|
{
|
|
writel(cr_reg, &priv->regs->ccr);
|
|
|
|
if (priv->command & CMD_HAS_ADR)
|
|
writel(priv->address, &priv->regs->ar);
|
|
}
|
|
|
|
static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv,
|
|
struct spi_flash *flash, unsigned int bitlen,
|
|
const u8 *dout, u8 *din, unsigned long flags)
|
|
{
|
|
unsigned int words = bitlen / 8;
|
|
|
|
if (flags & SPI_XFER_MMAP) {
|
|
_stm32_qspi_enable_mmap(priv, flash);
|
|
return 0;
|
|
} else if (flags & SPI_XFER_MMAP_END) {
|
|
_stm32_qspi_disable_mmap(priv);
|
|
return 0;
|
|
}
|
|
|
|
if (bitlen == 0)
|
|
return -1;
|
|
|
|
if (bitlen % 8) {
|
|
debug("spi_xfer: Non byte aligned SPI transfer\n");
|
|
return -1;
|
|
}
|
|
|
|
if (dout && din) {
|
|
debug("spi_xfer: QSPI cannot have data in and data out set\n");
|
|
return -1;
|
|
}
|
|
|
|
if (!dout && (flags & SPI_XFER_BEGIN)) {
|
|
debug("spi_xfer: QSPI transfer must begin with command\n");
|
|
return -1;
|
|
}
|
|
|
|
if (dout) {
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
/* data is command */
|
|
priv->command = dout[0] | CMD_HAS_DATA;
|
|
if (words >= 4) {
|
|
/* address is here too */
|
|
priv->address = (dout[1] << 16) |
|
|
(dout[2] << 8) | dout[3];
|
|
priv->command |= CMD_HAS_ADR;
|
|
}
|
|
|
|
if (words > 4) {
|
|
/* rest is dummy bytes */
|
|
priv->dummycycles = (words - 4) * 8;
|
|
priv->command |= CMD_HAS_DUMMY;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
/* command without data */
|
|
priv->command &= ~(CMD_HAS_DATA);
|
|
}
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
|
|
ccr_reg |= STM32_QSPI_CCR_IND_WRITE
|
|
<< STM32_QSPI_CCR_FMODE_SHIFT;
|
|
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
|
|
if (priv->command & CMD_HAS_DATA)
|
|
_stm32_qspi_set_xfer_length(priv, words);
|
|
|
|
_stm32_qspi_start_xfer(priv, ccr_reg);
|
|
|
|
debug("%s: write: ccr:0x%08x adr:0x%08x\n",
|
|
__func__, priv->regs->ccr, priv->regs->ar);
|
|
|
|
if (priv->command & CMD_HAS_DATA) {
|
|
_stm32_qspi_wait_for_ftf(priv);
|
|
|
|
debug("%s: words:%d data:", __func__, words);
|
|
|
|
int i = 0;
|
|
while (words > i) {
|
|
writeb(dout[i], &priv->regs->dr);
|
|
debug("%02x ", dout[i]);
|
|
i++;
|
|
}
|
|
debug("\n");
|
|
|
|
_stm32_qspi_wait_for_complete(priv);
|
|
} else {
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
}
|
|
}
|
|
} else if (din) {
|
|
u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
|
|
ccr_reg |= STM32_QSPI_CCR_IND_READ
|
|
<< STM32_QSPI_CCR_FMODE_SHIFT;
|
|
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
|
|
_stm32_qspi_set_xfer_length(priv, words);
|
|
|
|
_stm32_qspi_start_xfer(priv, ccr_reg);
|
|
|
|
debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__,
|
|
priv->regs->ccr, priv->regs->ar, priv->regs->dlr);
|
|
|
|
debug("%s: data:", __func__);
|
|
|
|
int i = 0;
|
|
while (words > i) {
|
|
din[i] = readb(&priv->regs->dr);
|
|
debug("%02x ", din[i]);
|
|
i++;
|
|
}
|
|
debug("\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct fdt_resource res_regs, res_mem;
|
|
struct stm32_qspi_platdata *plat = bus->platdata;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
int ret;
|
|
|
|
ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
|
|
"QuadSPI", &res_regs);
|
|
if (ret) {
|
|
debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
|
|
return -ENOMEM;
|
|
}
|
|
ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
|
|
"QuadSPI-memory", &res_mem);
|
|
if (ret) {
|
|
debug("Error: can't get mmap base address(ret = %d)!\n", ret);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
|
|
STM32_QSPI_DEFAULT_SCK_FREQ);
|
|
|
|
plat->base = res_regs.start;
|
|
plat->memory_map = res_mem.start;
|
|
|
|
debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n",
|
|
__func__,
|
|
plat->base,
|
|
plat->memory_map,
|
|
plat->max_hz
|
|
);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_probe(struct udevice *bus)
|
|
{
|
|
struct stm32_qspi_platdata *plat = dev_get_platdata(bus);
|
|
struct stm32_qspi_priv *priv = dev_get_priv(bus);
|
|
struct dm_spi_bus *dm_spi_bus;
|
|
|
|
dm_spi_bus = bus->uclass_priv;
|
|
|
|
dm_spi_bus->max_hz = plat->max_hz;
|
|
|
|
priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base;
|
|
|
|
priv->max_hz = plat->max_hz;
|
|
|
|
#ifdef CONFIG_CLK
|
|
int ret;
|
|
struct clk clk;
|
|
ret = clk_get_by_index(bus, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
|
|
if (ret) {
|
|
dev_err(bus, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->clock_rate = clk_get_rate(&clk);
|
|
if (priv->clock_rate < 0) {
|
|
clk_disable(&clk);
|
|
return priv->clock_rate;
|
|
}
|
|
|
|
#endif
|
|
|
|
setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_remove(struct udevice *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct stm32_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
struct spi_flash *flash;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
flash = dev_get_uclass_priv(dev);
|
|
|
|
_stm32_qspi_set_flash_size(priv, flash->size);
|
|
|
|
_stm32_qspi_enable(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_release_bus(struct udevice *dev)
|
|
{
|
|
struct stm32_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
|
|
_stm32_qspi_disable(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct stm32_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
struct spi_flash *flash;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
flash = dev_get_uclass_priv(dev);
|
|
|
|
return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout,
|
|
(u8 *)din, flags);
|
|
}
|
|
|
|
static int stm32_qspi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct stm32_qspi_platdata *plat = bus->platdata;
|
|
struct stm32_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
if (speed > plat->max_hz)
|
|
speed = plat->max_hz;
|
|
|
|
u32 qspi_clk = priv->clock_rate;
|
|
u32 prescaler = 255;
|
|
if (speed > 0) {
|
|
prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
|
|
if (prescaler > 255)
|
|
prescaler = 255;
|
|
else if (prescaler < 0)
|
|
prescaler = 0;
|
|
}
|
|
|
|
u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000);
|
|
csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK;
|
|
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
|
|
clrsetbits_le32(&priv->regs->cr,
|
|
STM32_QSPI_CR_PRESCALER_MASK <<
|
|
STM32_QSPI_CR_PRESCALER_SHIFT,
|
|
prescaler << STM32_QSPI_CR_PRESCALER_SHIFT);
|
|
|
|
|
|
clrsetbits_le32(&priv->regs->dcr,
|
|
STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT,
|
|
csht << STM32_QSPI_DCR_CSHT_SHIFT);
|
|
|
|
debug("%s: regs=%p, speed=%d\n", __func__, priv->regs,
|
|
(qspi_clk / (prescaler + 1)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_qspi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct stm32_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
_stm32_qspi_wait_for_not_busy(priv);
|
|
|
|
if ((mode & SPI_CPHA) && (mode & SPI_CPOL))
|
|
setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
|
|
else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL))
|
|
clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
|
|
else
|
|
return -ENODEV;
|
|
|
|
if (mode & SPI_CS_HIGH)
|
|
return -ENODEV;
|
|
|
|
if (mode & SPI_RX_QUAD)
|
|
priv->mode |= SPI_RX_QUAD;
|
|
else if (mode & SPI_RX_DUAL)
|
|
priv->mode |= SPI_RX_DUAL;
|
|
else
|
|
priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL);
|
|
|
|
if (mode & SPI_TX_QUAD)
|
|
priv->mode |= SPI_TX_QUAD;
|
|
else if (mode & SPI_TX_DUAL)
|
|
priv->mode |= SPI_TX_DUAL;
|
|
else
|
|
priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL);
|
|
|
|
debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode);
|
|
|
|
if (mode & SPI_RX_QUAD)
|
|
debug("quad, tx: ");
|
|
else if (mode & SPI_RX_DUAL)
|
|
debug("dual, tx: ");
|
|
else
|
|
debug("single, tx: ");
|
|
|
|
if (mode & SPI_TX_QUAD)
|
|
debug("quad\n");
|
|
else if (mode & SPI_TX_DUAL)
|
|
debug("dual\n");
|
|
else
|
|
debug("single\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops stm32_qspi_ops = {
|
|
.claim_bus = stm32_qspi_claim_bus,
|
|
.release_bus = stm32_qspi_release_bus,
|
|
.xfer = stm32_qspi_xfer,
|
|
.set_speed = stm32_qspi_set_speed,
|
|
.set_mode = stm32_qspi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id stm32_qspi_ids[] = {
|
|
{ .compatible = "st,stm32-qspi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(stm32_qspi) = {
|
|
.name = "stm32_qspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = stm32_qspi_ids,
|
|
.ops = &stm32_qspi_ops,
|
|
.ofdata_to_platdata = stm32_qspi_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct stm32_qspi_priv),
|
|
.probe = stm32_qspi_probe,
|
|
.remove = stm32_qspi_remove,
|
|
};
|