mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Minkyu Kang](/assets/img/avatar_default.png)
This patch will fix these checkpatch issues. ERROR: Macros with complex values should be enclosed in parentheses +#define DEFAULT_DQS_X4 (DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \ + || (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0) ERROR: space prohibited before that ',' (ctx:WxW) + writel(val , &drex0->concontrol); ^ ERROR: space prohibited before that ',' (ctx:WxW) + writel(val , &drex1->concontrol); ^ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
867 lines
27 KiB
C
867 lines
27 KiB
C
/*
|
|
* DDR3 mem setup file for board based on EXYNOS5
|
|
*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/dmc.h>
|
|
#include <asm/arch/power.h>
|
|
#include "common_setup.h"
|
|
#include "exynos5_setup.h"
|
|
#include "clock_init.h"
|
|
|
|
#define TIMEOUT_US 10000
|
|
#define NUM_BYTE_LANES 4
|
|
#define DEFAULT_DQS 8
|
|
#define DEFAULT_DQS_X4 ((DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \
|
|
|| (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0))
|
|
|
|
#ifdef CONFIG_EXYNOS5250
|
|
static void reset_phy_ctrl(void)
|
|
{
|
|
struct exynos5_clock *clk =
|
|
(struct exynos5_clock *)samsung_get_base_clock();
|
|
|
|
writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
|
|
writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
|
|
}
|
|
|
|
int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
|
|
{
|
|
unsigned int val;
|
|
struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
|
|
struct exynos5_dmc *dmc;
|
|
int i;
|
|
|
|
phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
|
|
phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
|
|
+ DMC_OFFSET);
|
|
dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
|
|
|
|
if (reset)
|
|
reset_phy_ctrl();
|
|
|
|
/* Set Impedance Output Driver */
|
|
val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
|
|
(mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
|
|
(mem->impedance << CA_CS_DRVR_DS_OFFSET) |
|
|
(mem->impedance << CA_ADR_DRVR_DS_OFFSET);
|
|
writel(val, &phy0_ctrl->phy_con39);
|
|
writel(val, &phy1_ctrl->phy_con39);
|
|
|
|
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
|
|
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
|
|
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con42);
|
|
writel(val, &phy1_ctrl->phy_con42);
|
|
|
|
/* ZQ Calibration */
|
|
if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
|
|
&phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
|
|
return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
|
|
|
|
/* DQ Signal */
|
|
writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
|
|
writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);
|
|
|
|
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
|
|
| (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
|
|
&dmc->concontrol);
|
|
|
|
update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
|
|
|
|
/* DQS Signal */
|
|
writel(mem->phy0_dqs, &phy0_ctrl->phy_con4);
|
|
writel(mem->phy1_dqs, &phy1_ctrl->phy_con4);
|
|
|
|
writel(mem->phy0_dq, &phy0_ctrl->phy_con6);
|
|
writel(mem->phy1_dq, &phy1_ctrl->phy_con6);
|
|
|
|
writel(mem->phy0_tFS, &phy0_ctrl->phy_con10);
|
|
writel(mem->phy1_tFS, &phy1_ctrl->phy_con10);
|
|
|
|
val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
|
|
(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
|
|
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
|
|
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con12);
|
|
writel(val, &phy1_ctrl->phy_con12);
|
|
|
|
/* Start DLL locking */
|
|
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
|
|
&phy0_ctrl->phy_con12);
|
|
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
|
|
&phy1_ctrl->phy_con12);
|
|
|
|
update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
|
|
|
|
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
|
|
&dmc->concontrol);
|
|
|
|
/* Memory Channel Inteleaving Size */
|
|
writel(mem->iv_size, &dmc->ivcontrol);
|
|
|
|
writel(mem->memconfig, &dmc->memconfig0);
|
|
writel(mem->memconfig, &dmc->memconfig1);
|
|
writel(mem->membaseconfig0, &dmc->membaseconfig0);
|
|
writel(mem->membaseconfig1, &dmc->membaseconfig1);
|
|
|
|
/* Precharge Configuration */
|
|
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
|
|
&dmc->prechconfig);
|
|
|
|
/* Power Down mode Configuration */
|
|
writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
|
|
mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
|
|
&dmc->pwrdnconfig);
|
|
|
|
/* TimingRow, TimingData, TimingPower and Timingaref
|
|
* values as per Memory AC parameters
|
|
*/
|
|
writel(mem->timing_ref, &dmc->timingref);
|
|
writel(mem->timing_row, &dmc->timingrow);
|
|
writel(mem->timing_data, &dmc->timingdata);
|
|
writel(mem->timing_power, &dmc->timingpower);
|
|
|
|
/* Send PALL command */
|
|
dmc_config_prech(mem, &dmc->directcmd);
|
|
|
|
/* Send NOP, MRS and ZQINIT commands */
|
|
dmc_config_mrs(mem, &dmc->directcmd);
|
|
|
|
if (mem->gate_leveling_enable) {
|
|
val = PHY_CON0_RESET_VAL;
|
|
val |= P0_CMD_EN;
|
|
writel(val, &phy0_ctrl->phy_con0);
|
|
writel(val, &phy1_ctrl->phy_con0);
|
|
|
|
val = PHY_CON2_RESET_VAL;
|
|
val |= INIT_DESKEW_EN;
|
|
writel(val, &phy0_ctrl->phy_con2);
|
|
writel(val, &phy1_ctrl->phy_con2);
|
|
|
|
val = PHY_CON0_RESET_VAL;
|
|
val |= P0_CMD_EN;
|
|
val |= BYTE_RDLVL_EN;
|
|
writel(val, &phy0_ctrl->phy_con0);
|
|
writel(val, &phy1_ctrl->phy_con0);
|
|
|
|
val = (mem->ctrl_start_point <<
|
|
PHY_CON12_CTRL_START_POINT_SHIFT) |
|
|
(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
|
|
(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
|
|
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
|
|
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con12);
|
|
writel(val, &phy1_ctrl->phy_con12);
|
|
|
|
val = PHY_CON2_RESET_VAL;
|
|
val |= INIT_DESKEW_EN;
|
|
val |= RDLVL_GATE_EN;
|
|
writel(val, &phy0_ctrl->phy_con2);
|
|
writel(val, &phy1_ctrl->phy_con2);
|
|
|
|
val = PHY_CON0_RESET_VAL;
|
|
val |= P0_CMD_EN;
|
|
val |= BYTE_RDLVL_EN;
|
|
val |= CTRL_SHGATE;
|
|
writel(val, &phy0_ctrl->phy_con0);
|
|
writel(val, &phy1_ctrl->phy_con0);
|
|
|
|
val = PHY_CON1_RESET_VAL;
|
|
val &= ~(CTRL_GATEDURADJ_MASK);
|
|
writel(val, &phy0_ctrl->phy_con1);
|
|
writel(val, &phy1_ctrl->phy_con1);
|
|
|
|
writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
|
|
i = TIMEOUT_US;
|
|
while ((readl(&dmc->phystatus) &
|
|
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
|
|
(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
|
|
/*
|
|
* TODO(waihong): Comment on how long this take to
|
|
* timeout
|
|
*/
|
|
sdelay(100);
|
|
i--;
|
|
}
|
|
if (!i)
|
|
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
|
|
writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config);
|
|
|
|
writel(0, &phy0_ctrl->phy_con14);
|
|
writel(0, &phy1_ctrl->phy_con14);
|
|
|
|
val = (mem->ctrl_start_point <<
|
|
PHY_CON12_CTRL_START_POINT_SHIFT) |
|
|
(mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
|
|
(mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
|
|
(mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
|
|
(mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
|
|
(mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con12);
|
|
writel(val, &phy1_ctrl->phy_con12);
|
|
|
|
update_reset_dll(&dmc->phycontrol0, DDR_MODE_DDR3);
|
|
}
|
|
|
|
/* Send PALL command */
|
|
dmc_config_prech(mem, &dmc->directcmd);
|
|
|
|
writel(mem->memcontrol, &dmc->memcontrol);
|
|
|
|
/* Set DMC Concontrol and enable auto-refresh counter */
|
|
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
|
|
| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_EXYNOS5420
|
|
/**
|
|
* RAM address to use in the test.
|
|
*
|
|
* We'll use 4 words at this address and 4 at this address + 0x80 (Ares
|
|
* interleaves channels every 128 bytes). This will allow us to evaluate all of
|
|
* the chips in a 1 chip per channel (2GB) system and half the chips in a 2
|
|
* chip per channel (4GB) system. We can't test the 2nd chip since we need to
|
|
* do tests before the 2nd chip is enabled. Looking at the 2nd chip isn't
|
|
* critical because the 1st and 2nd chip have very similar timings (they'd
|
|
* better have similar timings, since there's only a single adjustment that is
|
|
* shared by both chips).
|
|
*/
|
|
const unsigned int test_addr = CONFIG_SYS_SDRAM_BASE;
|
|
|
|
/* Test pattern with which RAM will be tested */
|
|
static const unsigned int test_pattern[] = {
|
|
0x5a5a5a5a,
|
|
0xa5a5a5a5,
|
|
0xf0f0f0f0,
|
|
0x0f0f0f0f,
|
|
};
|
|
|
|
/**
|
|
* This function is a test vector for sw read leveling,
|
|
* it compares the read data with the written data.
|
|
*
|
|
* @param ch DMC channel number
|
|
* @param byte_lane which DQS byte offset,
|
|
* possible values are 0,1,2,3
|
|
* @return TRUE if memory was good, FALSE if not.
|
|
*/
|
|
static bool dmc_valid_window_test_vector(int ch, int byte_lane)
|
|
{
|
|
unsigned int read_data;
|
|
unsigned int mask;
|
|
int i;
|
|
|
|
mask = 0xFF << (8 * byte_lane);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test_pattern); i++) {
|
|
read_data = readl(test_addr + i * 4 + ch * 0x80);
|
|
if ((read_data & mask) != (test_pattern[i] & mask))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* This function returns current read offset value.
|
|
*
|
|
* @param phy_ctrl pointer to the current phy controller
|
|
*/
|
|
static unsigned int dmc_get_read_offset_value(struct exynos5420_phy_control
|
|
*phy_ctrl)
|
|
{
|
|
return readl(&phy_ctrl->phy_con4);
|
|
}
|
|
|
|
/**
|
|
* This function performs resync, so that slave DLL is updated.
|
|
*
|
|
* @param phy_ctrl pointer to the current phy controller
|
|
*/
|
|
static void ddr_phy_set_do_resync(struct exynos5420_phy_control *phy_ctrl)
|
|
{
|
|
setbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
|
|
clrbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
|
|
}
|
|
|
|
/**
|
|
* This function sets read offset value register with 'offset'.
|
|
*
|
|
* ...we also call call ddr_phy_set_do_resync().
|
|
*
|
|
* @param phy_ctrl pointer to the current phy controller
|
|
* @param offset offset to read DQS
|
|
*/
|
|
static void dmc_set_read_offset_value(struct exynos5420_phy_control *phy_ctrl,
|
|
unsigned int offset)
|
|
{
|
|
writel(offset, &phy_ctrl->phy_con4);
|
|
ddr_phy_set_do_resync(phy_ctrl);
|
|
}
|
|
|
|
/**
|
|
* Convert a 2s complement byte to a byte with a sign bit.
|
|
*
|
|
* NOTE: you shouldn't use normal math on the number returned by this function.
|
|
* As an example, -10 = 0xf6. After this function -10 = 0x8a. If you wanted
|
|
* to do math and get the average of 10 and -10 (should be 0):
|
|
* 0x8a + 0xa = 0x94 (-108)
|
|
* 0x94 / 2 = 0xca (-54)
|
|
* ...and 0xca = sign bit plus 0x4a, or -74
|
|
*
|
|
* Also note that you lose the ability to represent -128 since there are two
|
|
* representations of 0.
|
|
*
|
|
* @param b The byte to convert in two's complement.
|
|
* @return The 7-bit value + sign bit.
|
|
*/
|
|
|
|
unsigned char make_signed_byte(signed char b)
|
|
{
|
|
if (b < 0)
|
|
return 0x80 | -b;
|
|
else
|
|
return b;
|
|
}
|
|
|
|
/**
|
|
* Test various shifts starting at 'start' and going to 'end'.
|
|
*
|
|
* For each byte lane, we'll walk through shift starting at 'start' and going
|
|
* to 'end' (inclusive). When we are finally able to read the test pattern
|
|
* we'll store the value in the results array.
|
|
*
|
|
* @param phy_ctrl pointer to the current phy controller
|
|
* @param ch channel number
|
|
* @param start the start shift. -127 to 127
|
|
* @param end the end shift. -127 to 127
|
|
* @param results we'll store results for each byte lane.
|
|
*/
|
|
|
|
void test_shifts(struct exynos5420_phy_control *phy_ctrl, int ch,
|
|
int start, int end, int results[NUM_BYTE_LANES])
|
|
{
|
|
int incr = (start < end) ? 1 : -1;
|
|
int byte_lane;
|
|
|
|
for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
|
|
int shift;
|
|
|
|
dmc_set_read_offset_value(phy_ctrl, DEFAULT_DQS_X4);
|
|
results[byte_lane] = DEFAULT_DQS;
|
|
|
|
for (shift = start; shift != (end + incr); shift += incr) {
|
|
unsigned int byte_offsetr;
|
|
unsigned int offsetr;
|
|
|
|
byte_offsetr = make_signed_byte(shift);
|
|
|
|
offsetr = dmc_get_read_offset_value(phy_ctrl);
|
|
offsetr &= ~(0xFF << (8 * byte_lane));
|
|
offsetr |= (byte_offsetr << (8 * byte_lane));
|
|
dmc_set_read_offset_value(phy_ctrl, offsetr);
|
|
|
|
if (dmc_valid_window_test_vector(ch, byte_lane)) {
|
|
results[byte_lane] = shift;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* This function performs SW read leveling to compensate DQ-DQS skew at
|
|
* receiver it first finds the optimal read offset value on each DQS
|
|
* then applies the value to PHY.
|
|
*
|
|
* Read offset value has its min margin and max margin. If read offset
|
|
* value exceeds its min or max margin, read data will have corruption.
|
|
* To avoid this we are doing sw read leveling.
|
|
*
|
|
* SW read leveling is:
|
|
* 1> Finding offset value's left_limit and right_limit
|
|
* 2> and calculate its center value
|
|
* 3> finally programs that center value to PHY
|
|
* 4> then PHY gets its optimal offset value.
|
|
*
|
|
* @param phy_ctrl pointer to the current phy controller
|
|
* @param ch channel number
|
|
* @param coarse_lock_val The coarse lock value read from PHY_CON13.
|
|
* (0 - 0x7f)
|
|
*/
|
|
static void software_find_read_offset(struct exynos5420_phy_control *phy_ctrl,
|
|
int ch, unsigned int coarse_lock_val)
|
|
{
|
|
unsigned int offsetr_cent;
|
|
int byte_lane;
|
|
int left_limit;
|
|
int right_limit;
|
|
int left[NUM_BYTE_LANES];
|
|
int right[NUM_BYTE_LANES];
|
|
int i;
|
|
|
|
/* Fill the memory with test patterns */
|
|
for (i = 0; i < ARRAY_SIZE(test_pattern); i++)
|
|
writel(test_pattern[i], test_addr + i * 4 + ch * 0x80);
|
|
|
|
/* Figure out the limits we'll test with; keep -127 < limit < 127 */
|
|
left_limit = DEFAULT_DQS - coarse_lock_val;
|
|
right_limit = DEFAULT_DQS + coarse_lock_val;
|
|
if (right_limit > 127)
|
|
right_limit = 127;
|
|
|
|
/* Fill in the location where reads were OK from left and right */
|
|
test_shifts(phy_ctrl, ch, left_limit, right_limit, left);
|
|
test_shifts(phy_ctrl, ch, right_limit, left_limit, right);
|
|
|
|
/* Make a final value by taking the center between the left and right */
|
|
offsetr_cent = 0;
|
|
for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
|
|
int temp_center;
|
|
unsigned int vmwc;
|
|
|
|
temp_center = (left[byte_lane] + right[byte_lane]) / 2;
|
|
vmwc = make_signed_byte(temp_center);
|
|
offsetr_cent |= vmwc << (8 * byte_lane);
|
|
}
|
|
dmc_set_read_offset_value(phy_ctrl, offsetr_cent);
|
|
}
|
|
|
|
int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
|
|
{
|
|
struct exynos5420_clock *clk =
|
|
(struct exynos5420_clock *)samsung_get_base_clock();
|
|
struct exynos5420_power *power =
|
|
(struct exynos5420_power *)samsung_get_base_power();
|
|
struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl;
|
|
struct exynos5420_dmc *drex0, *drex1;
|
|
struct exynos5420_tzasc *tzasc0, *tzasc1;
|
|
struct exynos5_power *pmu;
|
|
uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1;
|
|
uint32_t lock0_info, lock1_info;
|
|
int chip;
|
|
int i;
|
|
|
|
phy0_ctrl = (struct exynos5420_phy_control *)samsung_get_base_dmc_phy();
|
|
phy1_ctrl = (struct exynos5420_phy_control *)(samsung_get_base_dmc_phy()
|
|
+ DMC_OFFSET);
|
|
drex0 = (struct exynos5420_dmc *)samsung_get_base_dmc_ctrl();
|
|
drex1 = (struct exynos5420_dmc *)(samsung_get_base_dmc_ctrl()
|
|
+ DMC_OFFSET);
|
|
tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc();
|
|
tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc()
|
|
+ DMC_OFFSET);
|
|
pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
|
|
|
|
if (CONFIG_NR_DRAM_BANKS > 4) {
|
|
/* Need both controllers. */
|
|
mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2;
|
|
mem->chips_per_channel = 2;
|
|
mem->chips_to_configure = 2;
|
|
} else {
|
|
/* 2GB requires a single controller */
|
|
mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1;
|
|
}
|
|
|
|
/* Enable PAUSE for DREX */
|
|
setbits_le32(&clk->pause, ENABLE_BIT);
|
|
|
|
/* Enable BYPASS mode */
|
|
setbits_le32(&clk->bpll_con1, BYPASS_EN);
|
|
|
|
writel(MUX_BPLL_SEL_FOUTBPLL, &clk->src_cdrex);
|
|
do {
|
|
val = readl(&clk->mux_stat_cdrex);
|
|
val &= BPLL_SEL_MASK;
|
|
} while (val != FOUTBPLL);
|
|
|
|
clrbits_le32(&clk->bpll_con1, BYPASS_EN);
|
|
|
|
/* Specify the DDR memory type as DDR3 */
|
|
val = readl(&phy0_ctrl->phy_con0);
|
|
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
|
|
val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con0);
|
|
|
|
val = readl(&phy1_ctrl->phy_con0);
|
|
val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
|
|
val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
|
|
writel(val, &phy1_ctrl->phy_con0);
|
|
|
|
/* Set Read Latency and Burst Length for PHY0 and PHY1 */
|
|
val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
|
|
(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
|
|
writel(val, &phy0_ctrl->phy_con42);
|
|
writel(val, &phy1_ctrl->phy_con42);
|
|
|
|
val = readl(&phy0_ctrl->phy_con26);
|
|
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
|
|
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
|
|
writel(val, &phy0_ctrl->phy_con26);
|
|
|
|
val = readl(&phy1_ctrl->phy_con26);
|
|
val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
|
|
val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
|
|
writel(val, &phy1_ctrl->phy_con26);
|
|
|
|
/*
|
|
* Set Driver strength for CK, CKE, CS & CA to 0x7
|
|
* Set Driver strength for Data Slice 0~3 to 0x7
|
|
*/
|
|
val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) |
|
|
(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
|
|
val |= (0x7 << DA_3_DS_OFFSET) | (0x7 << DA_2_DS_OFFSET) |
|
|
(0x7 << DA_1_DS_OFFSET) | (0x7 << DA_0_DS_OFFSET);
|
|
writel(val, &phy0_ctrl->phy_con39);
|
|
writel(val, &phy1_ctrl->phy_con39);
|
|
|
|
/* ZQ Calibration */
|
|
if (dmc_config_zq(mem, &phy0_ctrl->phy_con16, &phy1_ctrl->phy_con16,
|
|
&phy0_ctrl->phy_con17, &phy1_ctrl->phy_con17))
|
|
return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
|
|
|
|
clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN);
|
|
clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);
|
|
|
|
/* DQ Signal */
|
|
val = readl(&phy0_ctrl->phy_con14);
|
|
val |= mem->phy0_pulld_dqs;
|
|
writel(val, &phy0_ctrl->phy_con14);
|
|
val = readl(&phy1_ctrl->phy_con14);
|
|
val |= mem->phy1_pulld_dqs;
|
|
writel(val, &phy1_ctrl->phy_con14);
|
|
|
|
val = MEM_TERM_EN | PHY_TERM_EN;
|
|
writel(val, &drex0->phycontrol0);
|
|
writel(val, &drex1->phycontrol0);
|
|
|
|
writel(mem->concontrol |
|
|
(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
|
|
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
|
|
&drex0->concontrol);
|
|
writel(mem->concontrol |
|
|
(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
|
|
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
|
|
&drex1->concontrol);
|
|
|
|
do {
|
|
val = readl(&drex0->phystatus);
|
|
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
|
|
do {
|
|
val = readl(&drex1->phystatus);
|
|
} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
|
|
|
|
clrbits_le32(&drex0->concontrol, DFI_INIT_START);
|
|
clrbits_le32(&drex1->concontrol, DFI_INIT_START);
|
|
|
|
update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
|
|
update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
|
|
|
|
/*
|
|
* Set Base Address:
|
|
* 0x2000_0000 ~ 0x5FFF_FFFF
|
|
* 0x6000_0000 ~ 0x9FFF_FFFF
|
|
*/
|
|
/* MEMBASECONFIG0 */
|
|
val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_0) |
|
|
DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
|
|
writel(val, &tzasc0->membaseconfig0);
|
|
writel(val, &tzasc1->membaseconfig0);
|
|
|
|
/* MEMBASECONFIG1 */
|
|
val = DMC_MEMBASECONFIGX_CHIP_BASE(DMC_CHIP_BASE_1) |
|
|
DMC_MEMBASECONFIGX_CHIP_MASK(DMC_CHIP_MASK);
|
|
writel(val, &tzasc0->membaseconfig1);
|
|
writel(val, &tzasc1->membaseconfig1);
|
|
|
|
/*
|
|
* Memory Channel Inteleaving Size
|
|
* Ares Channel interleaving = 128 bytes
|
|
*/
|
|
/* MEMCONFIG0/1 */
|
|
writel(mem->memconfig, &tzasc0->memconfig0);
|
|
writel(mem->memconfig, &tzasc1->memconfig0);
|
|
writel(mem->memconfig, &tzasc0->memconfig1);
|
|
writel(mem->memconfig, &tzasc1->memconfig1);
|
|
|
|
/* Precharge Configuration */
|
|
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
|
|
&drex0->prechconfig0);
|
|
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
|
|
&drex1->prechconfig0);
|
|
|
|
/*
|
|
* TimingRow, TimingData, TimingPower and Timingaref
|
|
* values as per Memory AC parameters
|
|
*/
|
|
writel(mem->timing_ref, &drex0->timingref);
|
|
writel(mem->timing_ref, &drex1->timingref);
|
|
writel(mem->timing_row, &drex0->timingrow0);
|
|
writel(mem->timing_row, &drex1->timingrow0);
|
|
writel(mem->timing_data, &drex0->timingdata0);
|
|
writel(mem->timing_data, &drex1->timingdata0);
|
|
writel(mem->timing_power, &drex0->timingpower0);
|
|
writel(mem->timing_power, &drex1->timingpower0);
|
|
|
|
if (reset) {
|
|
/*
|
|
* Send NOP, MRS and ZQINIT commands
|
|
* Sending MRS command will reset the DRAM. We should not be
|
|
* reseting the DRAM after resume, this will lead to memory
|
|
* corruption as DRAM content is lost after DRAM reset
|
|
*/
|
|
dmc_config_mrs(mem, &drex0->directcmd);
|
|
dmc_config_mrs(mem, &drex1->directcmd);
|
|
}
|
|
|
|
/*
|
|
* Get PHY_CON13 from both phys. Gate CLKM around reading since
|
|
* PHY_CON13 is glitchy when CLKM is running. We're paranoid and
|
|
* wait until we get a "fine lock", though a coarse lock is probably
|
|
* OK (we only use the coarse numbers below). We try to gate the
|
|
* clock for as short a time as possible in case SDRAM is somehow
|
|
* sensitive. sdelay(10) in the loop is arbitrary to make sure
|
|
* there is some time for PHY_CON13 to get updated. In practice
|
|
* no delay appears to be needed.
|
|
*/
|
|
val = readl(&clk->gate_bus_cdrex);
|
|
while (true) {
|
|
writel(val & ~0x1, &clk->gate_bus_cdrex);
|
|
lock0_info = readl(&phy0_ctrl->phy_con13);
|
|
writel(val, &clk->gate_bus_cdrex);
|
|
|
|
if ((lock0_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
|
|
break;
|
|
|
|
sdelay(10);
|
|
}
|
|
while (true) {
|
|
writel(val & ~0x2, &clk->gate_bus_cdrex);
|
|
lock1_info = readl(&phy1_ctrl->phy_con13);
|
|
writel(val, &clk->gate_bus_cdrex);
|
|
|
|
if ((lock1_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
|
|
break;
|
|
|
|
sdelay(10);
|
|
}
|
|
|
|
if (!reset) {
|
|
/*
|
|
* During Suspend-Resume & S/W-Reset, as soon as PMU releases
|
|
* pad retention, CKE goes high. This causes memory contents
|
|
* not to be retained during DRAM initialization. Therfore,
|
|
* there is a new control register(0x100431e8[28]) which lets us
|
|
* release pad retention and retain the memory content until the
|
|
* initialization is complete.
|
|
*/
|
|
writel(PAD_RETENTION_DRAM_COREBLK_VAL,
|
|
&power->pad_retention_dram_coreblk_option);
|
|
do {
|
|
val = readl(&power->pad_retention_dram_status);
|
|
} while (val != 0x1);
|
|
|
|
/*
|
|
* CKE PAD retention disables DRAM self-refresh mode.
|
|
* Send auto refresh command for DRAM refresh.
|
|
*/
|
|
for (i = 0; i < 128; i++) {
|
|
for (chip = 0; chip < mem->chips_to_configure; chip++) {
|
|
writel(DIRECT_CMD_REFA |
|
|
(chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex0->directcmd);
|
|
writel(DIRECT_CMD_REFA |
|
|
(chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex1->directcmd);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (mem->gate_leveling_enable) {
|
|
writel(PHY_CON0_RESET_VAL, &phy0_ctrl->phy_con0);
|
|
writel(PHY_CON0_RESET_VAL, &phy1_ctrl->phy_con0);
|
|
|
|
setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
|
|
setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);
|
|
|
|
val = PHY_CON2_RESET_VAL;
|
|
val |= INIT_DESKEW_EN;
|
|
writel(val, &phy0_ctrl->phy_con2);
|
|
writel(val, &phy1_ctrl->phy_con2);
|
|
|
|
val = readl(&phy0_ctrl->phy_con1);
|
|
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
|
|
writel(val, &phy0_ctrl->phy_con1);
|
|
|
|
val = readl(&phy1_ctrl->phy_con1);
|
|
val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
|
|
writel(val, &phy1_ctrl->phy_con1);
|
|
|
|
n_lock_w_phy0 = (lock0_info & CTRL_LOCK_COARSE_MASK) >> 2;
|
|
n_lock_r = readl(&phy0_ctrl->phy_con12);
|
|
n_lock_r &= ~CTRL_DLL_ON;
|
|
n_lock_r |= n_lock_w_phy0;
|
|
writel(n_lock_r, &phy0_ctrl->phy_con12);
|
|
|
|
n_lock_w_phy1 = (lock1_info & CTRL_LOCK_COARSE_MASK) >> 2;
|
|
n_lock_r = readl(&phy1_ctrl->phy_con12);
|
|
n_lock_r &= ~CTRL_DLL_ON;
|
|
n_lock_r |= n_lock_w_phy1;
|
|
writel(n_lock_r, &phy1_ctrl->phy_con12);
|
|
|
|
val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
|
|
for (chip = 0; chip < mem->chips_to_configure; chip++) {
|
|
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex0->directcmd);
|
|
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex1->directcmd);
|
|
}
|
|
|
|
setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN);
|
|
setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN);
|
|
|
|
setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE);
|
|
setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE);
|
|
|
|
val = readl(&phy0_ctrl->phy_con1);
|
|
val &= ~(CTRL_GATEDURADJ_MASK);
|
|
writel(val, &phy0_ctrl->phy_con1);
|
|
|
|
val = readl(&phy1_ctrl->phy_con1);
|
|
val &= ~(CTRL_GATEDURADJ_MASK);
|
|
writel(val, &phy1_ctrl->phy_con1);
|
|
|
|
writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
|
|
i = TIMEOUT_US;
|
|
while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
|
|
RDLVL_COMPLETE_CHO) && (i > 0)) {
|
|
/*
|
|
* TODO(waihong): Comment on how long this take to
|
|
* timeout
|
|
*/
|
|
sdelay(100);
|
|
i--;
|
|
}
|
|
if (!i)
|
|
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
|
|
writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);
|
|
|
|
writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
|
|
i = TIMEOUT_US;
|
|
while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
|
|
RDLVL_COMPLETE_CHO) && (i > 0)) {
|
|
/*
|
|
* TODO(waihong): Comment on how long this take to
|
|
* timeout
|
|
*/
|
|
sdelay(100);
|
|
i--;
|
|
}
|
|
if (!i)
|
|
return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
|
|
writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config);
|
|
|
|
writel(0, &phy0_ctrl->phy_con14);
|
|
writel(0, &phy1_ctrl->phy_con14);
|
|
|
|
val = (0x3 << DIRECT_CMD_BANK_SHIFT);
|
|
for (chip = 0; chip < mem->chips_to_configure; chip++) {
|
|
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex0->directcmd);
|
|
writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
|
|
&drex1->directcmd);
|
|
}
|
|
|
|
/* Common Settings for Leveling */
|
|
val = PHY_CON12_RESET_VAL;
|
|
writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);
|
|
writel((val + n_lock_w_phy1), &phy1_ctrl->phy_con12);
|
|
|
|
setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN);
|
|
setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
|
|
}
|
|
|
|
/*
|
|
* Do software read leveling
|
|
*
|
|
* Do this before we turn on auto refresh since the auto refresh can
|
|
* be in conflict with the resync operation that's part of setting
|
|
* read leveling.
|
|
*/
|
|
if (!reset) {
|
|
/* restore calibrated value after resume */
|
|
dmc_set_read_offset_value(phy0_ctrl, readl(&pmu->pmu_spare1));
|
|
dmc_set_read_offset_value(phy1_ctrl, readl(&pmu->pmu_spare2));
|
|
} else {
|
|
software_find_read_offset(phy0_ctrl, 0,
|
|
CTRL_LOCK_COARSE(lock0_info));
|
|
software_find_read_offset(phy1_ctrl, 1,
|
|
CTRL_LOCK_COARSE(lock1_info));
|
|
/* save calibrated value to restore after resume */
|
|
writel(dmc_get_read_offset_value(phy0_ctrl), &pmu->pmu_spare1);
|
|
writel(dmc_get_read_offset_value(phy1_ctrl), &pmu->pmu_spare2);
|
|
}
|
|
|
|
/* Send PALL command */
|
|
dmc_config_prech(mem, &drex0->directcmd);
|
|
dmc_config_prech(mem, &drex1->directcmd);
|
|
|
|
writel(mem->memcontrol, &drex0->memcontrol);
|
|
writel(mem->memcontrol, &drex1->memcontrol);
|
|
|
|
/*
|
|
* Set DMC Concontrol: Enable auto-refresh counter, provide
|
|
* read data fetch cycles and enable DREX auto set powerdown
|
|
* for input buffer of I/O in none read memory state.
|
|
*/
|
|
writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
|
|
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
|
|
DMC_CONCONTROL_IO_PD_CON(0x2),
|
|
&drex0->concontrol);
|
|
writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
|
|
(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)|
|
|
DMC_CONCONTROL_IO_PD_CON(0x2),
|
|
&drex1->concontrol);
|
|
|
|
/*
|
|
* Enable Clock Gating Control for DMC
|
|
* this saves around 25 mw dmc power as compared to the power
|
|
* consumption without these bits enabled
|
|
*/
|
|
setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
|
|
setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
|
|
|
|
/*
|
|
* As per Exynos5800 UM ver 0.00 section 17.13.2.1
|
|
* CONCONTROL register bit 3 [update_mode], Exynos5800 does not
|
|
* support the PHY initiated update. And it is recommended to set
|
|
* this field to 1'b1 during initialization
|
|
*
|
|
* When we apply PHY-initiated mode, DLL lock value is determined
|
|
* once at DMC init time and not updated later when we change the MIF
|
|
* voltage based on ASV group in kernel. Applying MC-initiated mode
|
|
* makes sure that DLL tracing is ON so that silicon is able to
|
|
* compensate the voltage variation.
|
|
*/
|
|
val = readl(&drex0->concontrol);
|
|
val |= CONCONTROL_UPDATE_MODE;
|
|
writel(val, &drex0->concontrol);
|
|
val = readl(&drex1->concontrol);
|
|
val |= CONCONTROL_UPDATE_MODE;
|
|
writel(val, &drex1->concontrol);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|