mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
103 lines
3.0 KiB
C
103 lines
3.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2018
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
|
*/
|
|
|
|
#ifndef __CONFIG_H_
|
|
#define __CONFIG_H_
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 1
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* Command definition */
|
|
#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=ttymxc1,115200\0" \
|
|
"fdt_addr=0x75000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"scriptaddr=0x74000000\0" \
|
|
"kernel_file=fitImage\0"\
|
|
"silent=1\0"\
|
|
"rdinit=/sbin/init\0" \
|
|
"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
|
|
"upd_image=st.4k\0" \
|
|
"uboot_file=u-boot.imx\0" \
|
|
"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
|
|
"initrd_ram_dev=/dev/ram\0" \
|
|
"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
|
|
"addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \
|
|
"loadusb=usb start; " \
|
|
"fatload usb 0 ${loadaddr} ${upd_image}\0" \
|
|
"up=if tftp ${loadaddr} ${uboot_file}; then " \
|
|
"setexpr blkc ${filesize} / 0x200; " \
|
|
"setexpr blkc ${blkc} + 1; " \
|
|
"mmc write ${loadaddr} 0x2 ${blkc}" \
|
|
"; fi\0" \
|
|
"upwic=setenv wic_file kp-image-kp${boardsoc}.wic; "\
|
|
"if tftp ${loadaddr} ${wic_file}; then " \
|
|
"setexpr blkc ${filesize} / 0x200; " \
|
|
"setexpr blkc ${blkc} + 1; " \
|
|
"mmc write ${loadaddr} 0x0 ${blkc}" \
|
|
"; fi\0" \
|
|
"usbupd=echo Booting update from usb ...; " \
|
|
"setenv bootargs; " \
|
|
"run updargs; " \
|
|
"run addinitrd; " \
|
|
"run addswupdate; " \
|
|
"run addkeys; " \
|
|
"run loadusb; " \
|
|
"bootm ${loadaddr}#${fit_config}\0" \
|
|
BOOTENV
|
|
|
|
#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_1_SIZE (512 * SZ_1M)
|
|
#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* environment organization */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#endif /* __CONFIG_H_ */
|