u-boot-brain/doc/device-tree-bindings/sysreset/ti,sci-sysreset.txt
Andreas Dannenberg 694b052401 sysreset: Add TI System Control Interface (TI SCI) sysreset driver
Devices from the TI K3 family of SoCs like the AM654x contain a Device
Management and Security Controller (SYSFW) that manages the low-level
device control (like clocks, resets etc) for the various hardware
modules present on the SoC. These device control operations are provided
to the host processor OS through a communication protocol called the TI
System Control Interface (TI SCI) protocol.

This patch adds a system reset driver that communicates to the system
controller over the TI SCI protocol for allowing to perform a system-
wide SoC reset.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11 08:32:55 -04:00

30 lines
958 B
Plaintext

Texas Instruments TI SCI System Reset Controller
================================================
Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
responsible for controlling the state of the IPs that are present.
Communication between the host processor running an OS and the system
controller happens through a protocol known as TI SCI [1].
[1] http://processors.wiki.ti.com/index.php/TISCI
System Reset Controller Node
============================
The sysreset controller node represents the reset for the overall SoC
which is managed by the SYSFW. Because this relies on the TI SCI protocol
to communicate with the SYSFW it must be a child of the sysfw node.
Required Properties:
--------------------
- compatible: Must be "ti,sci-sysreset"
Example (AM65x):
----------------
sysfw: sysfw {
compatible = "ti,am654-system-controller";
...
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
};
};