mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Peng Fan](/assets/img/avatar_default.png)
The pinmux and tuning settings are from https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ arm/boot/dts/imx7s.dtsi?h=imx_4.9.11_1.0.0_ga https://source.codeaurora.org/external/imx/linux-imx/tree/arch/ arm/boot/dts/imx7d-sdb.dts?h=imx_4.9.11_1.0.0_ga To support HS200 and SDR104, we need change pinmux settings dynamically. And configure tuning step and start tuning tap, otherwise you may see tuning failure. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
398 lines
9.4 KiB
Plaintext
398 lines
9.4 KiB
Plaintext
/*
|
|
* Copyright 2017 NXP
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx7d.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX7 SabreSD Board";
|
|
compatible = "fsl,imx7d-sdb", "fsl,imx7d";
|
|
|
|
memory {
|
|
reg = <0x80000000 0x80000000>;
|
|
};
|
|
|
|
spi4 {
|
|
compatible = "spi-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1>;
|
|
status = "okay";
|
|
gpio-sck = <&gpio1 13 0>;
|
|
gpio-mosi = <&gpio1 9 0>;
|
|
cs-gpios = <&gpio1 12 0>;
|
|
num-chipselects = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio_spi: gpio_spi@0 {
|
|
compatible = "fairchild,74hc595";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0>;
|
|
registers-number = <1>;
|
|
registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
|
|
spi-max-frequency = <100000>;
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_usb_otg1_vbus: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "usb_otg2_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_sd1_vmmc: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDD_SD1";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <200000>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
imx7d-sdb {
|
|
pinctrl_spi1: spi1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59
|
|
MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59
|
|
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
|
|
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
|
|
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
|
|
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: i2c4grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
|
|
MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
|
|
MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
|
|
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */
|
|
MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
|
|
MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
|
|
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
|
|
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
|
|
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
|
|
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
|
|
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x19 /* WL_REG_ON */
|
|
MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x19 /* WL_HOST_WAKE */
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
|
|
MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
|
|
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
|
|
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
|
|
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
|
|
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
|
|
fsl,pins = <
|
|
MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
|
|
MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
|
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
|
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
|
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
|
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
|
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
|
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
|
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
|
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
|
|
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze3000@08 {
|
|
compatible = "fsl,pfuze3000";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1a {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
/* use sw1c_reg to align with pfuze100/pfuze200 */
|
|
sw1c_reg: sw1b {
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1475000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1850000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3 {
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1650000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vldo1 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vldo2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen3_reg: vccsd {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen4_reg: v33 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vldo4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
|
|
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
vmmc-supply = <®_sd1_vmmc>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
non-removable;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
status = "okay";
|
|
};
|