mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
384 lines
15 KiB
C
384 lines
15 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/************************************************************************
|
|
* acadia.h - configuration for AMCC Acadia (405EZ)
|
|
***********************************************************************/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* High Level Configuration Options
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_ACADIA 1 /* Board is Acadia */
|
|
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
|
#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
|
|
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
|
|
#endif
|
|
|
|
/*
|
|
* Include common defines/options for all AMCC eval boards
|
|
*/
|
|
#define CONFIG_HOSTNAME acadia
|
|
#include "amcc-common.h"
|
|
|
|
/* Detect Acadia PLL input clock automatically via CPLD bit */
|
|
#define CONFIG_SYS_CLK_FREQ ((in8(CONFIG_SYS_CPLD_BASE + 0) == 0x0c) ? \
|
|
66666666 : 33333000)
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */
|
|
|
|
#define CONFIG_NO_SERIAL_EEPROM
|
|
/*#undef CONFIG_NO_SERIAL_EEPROM*/
|
|
|
|
#ifdef CONFIG_NO_SERIAL_EEPROM
|
|
/*----------------------------------------------------------------------------
|
|
* PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
|
|
* assuming a 66MHz input clock to the 405EZ.
|
|
*---------------------------------------------------------------------------*/
|
|
/* #define PLLMR0_100_100_12 */
|
|
#define PLLMR0_200_133_66
|
|
/* #define PLLMR0_266_160_80 */
|
|
/* #define PLLMR0_333_166_83 */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xfe000000
|
|
#define CONFIG_SYS_CPLD_BASE 0x80000000
|
|
#define CONFIG_SYS_NAND_ADDR 0xd0000000
|
|
#define CONFIG_SYS_USB_HOST 0xef603000 /* USB OHCI 1.1 controller */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Initial RAM & stack pointer
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_TEMP_STACK_OCM 1 /* OCM as init ram */
|
|
|
|
/* On Chip Memory location */
|
|
#define CONFIG_SYS_OCM_DATA_ADDR 0xf8000000
|
|
#define CONFIG_SYS_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Serial Port
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
|
|
#define CONFIG_SYS_BASE_BAUD 691200
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment
|
|
*----------------------------------------------------------------------*/
|
|
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
|
|
#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
#else
|
|
/*
|
|
* No NOR-flash on Acadia when NAND-booting. We need to undef the
|
|
* NOR device-tree fixup code as well, since flash_info is not defined
|
|
* in this case.
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
#undef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
#endif
|
|
|
|
/*
|
|
* IPL (Initial Program Loader, integrated inside CPU)
|
|
* Will load first 4k from NAND (SPL) into cache and execute it from there.
|
|
*
|
|
* SPL (Secondary Program Loader)
|
|
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
|
|
* has to fit into 4kByte. It sets up the CPU and configures the SDRAM
|
|
* controller and the NAND controller so that the special U-Boot image can be
|
|
* loaded from NAND to SDRAM.
|
|
*
|
|
* NUB (NAND U-Boot)
|
|
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
|
|
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
|
|
*
|
|
* On 440EPx the SPL is copied to SDRAM before the NAND controller is
|
|
* set up. While still running from cache, I experienced problems accessing
|
|
* the NAND controller. sr - 2006-08-25
|
|
*/
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
|
|
|
|
/*
|
|
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
|
|
|
|
/*
|
|
* Now the NAND chip has to be defined (no autodetection used!)
|
|
*/
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
|
|
#undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 256
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
|
|
#define CONFIG_SYS_NAND_OOBSIZE 16
|
|
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
|
|
#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NAND
|
|
/*
|
|
* For NAND booting the environment is embedded in the U-Boot image. Please take
|
|
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
|
|
*/
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* RAM (CRAM)
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_MBYTES_RAM 64 /* 64MB */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
|
|
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
|
|
#define CONFIG_DTT_AD7414 1 /* use AD7414 */
|
|
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
|
|
#define CONFIG_SYS_DTT_MAX_TEMP 70
|
|
#define CONFIG_SYS_DTT_LOW_TEMP -30
|
|
#define CONFIG_SYS_DTT_HYSTERESIS 3
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Ethernet
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
|
#define CONFIG_HAS_ETH0 1
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_AMCC_DEF_ENV \
|
|
CONFIG_AMCC_DEF_ENV_POWERPC \
|
|
CONFIG_AMCC_DEF_ENV_PPC_OLD \
|
|
CONFIG_AMCC_DEF_ENV_NOR_UPD \
|
|
CONFIG_AMCC_DEF_ENV_NAND_UPD \
|
|
"kernel_addr=fff10000\0" \
|
|
"ramdisk_addr=fff20000\0" \
|
|
"kozio=bootm ffc60000\0" \
|
|
""
|
|
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
#define CONFIG_SUPPORT_VFAT
|
|
|
|
/*
|
|
* Commands additional to the ones defined in amcc-common.h
|
|
*/
|
|
#define CONFIG_CMD_DTT
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_USB
|
|
|
|
/*
|
|
* No NOR on Acadia when NAND-booting
|
|
*/
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
#undef CONFIG_CMD_FLASH
|
|
#undef CONFIG_CMD_IMLS
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* NAND FLASH
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* External Bus Controller (EBC) Setup
|
|
*----------------------------------------------------------------------*/
|
|
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_SYS_NAND_CS 3
|
|
/* Memory Bank 0 (Flash) initialization */
|
|
#define CONFIG_SYS_EBC_PB0AP 0x03337200
|
|
#define CONFIG_SYS_EBC_PB0CR 0xfe0bc000
|
|
|
|
/* Memory Bank 3 (NAND-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB3AP 0x018003c0
|
|
#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_NAND_ADDR | 0x1c000)
|
|
|
|
/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
|
|
/* Memory Bank 1 (CRAM) initialization */
|
|
#define CONFIG_SYS_EBC_PB1AP 0x030400c0
|
|
#define CONFIG_SYS_EBC_PB1CR 0x000bc000
|
|
|
|
/* Memory Bank 2 (CRAM) initialization */
|
|
#define CONFIG_SYS_EBC_PB2AP 0x030400c0
|
|
#define CONFIG_SYS_EBC_PB2CR 0x020bc000
|
|
#else
|
|
#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
|
|
/* Memory Bank 0 (NAND-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB0AP 0x018003c0
|
|
#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000)
|
|
|
|
/*
|
|
* When NAND-booting the CRAM EBC setup must be done in sync mode, since the
|
|
* NAND-SPL already initialized the CRAM and EBC to sync mode.
|
|
*/
|
|
/* Memory Bank 1 (CRAM) initialization */
|
|
#define CONFIG_SYS_EBC_PB1AP 0x9C0201C0
|
|
#define CONFIG_SYS_EBC_PB1CR 0x000bc000
|
|
|
|
/* Memory Bank 2 (CRAM) initialization */
|
|
#define CONFIG_SYS_EBC_PB2AP 0x9C0201C0
|
|
#define CONFIG_SYS_EBC_PB2CR 0x020bc000
|
|
#endif
|
|
|
|
/* Memory Bank 4 (CPLD) initialization */
|
|
#define CONFIG_SYS_EBC_PB4AP 0x04006000
|
|
#define CONFIG_SYS_EBC_PB4CR (CONFIG_SYS_CPLD_BASE | 0x18000)
|
|
|
|
#define CONFIG_SYS_EBC_CFG 0xf8400000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* GPIO Setup
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_GPIO_CRAM_CLK 8
|
|
#define CONFIG_SYS_GPIO_CRAM_WAIT 9 /* GPIO-In */
|
|
#define CONFIG_SYS_GPIO_CRAM_ADV 10
|
|
#define CONFIG_SYS_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for GPIO_0 setup (PPC405EZ specific)
|
|
*
|
|
* GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs
|
|
* GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output
|
|
* GPIO0[4] - External Bus Controller Hold Input
|
|
* GPIO0[5] - External Bus Controller Priority Input
|
|
* GPIO0[6] - External Bus Controller HLDA Output
|
|
* GPIO0[7] - External Bus Controller Bus Request Output
|
|
* GPIO0[8] - CRAM Clk Output
|
|
* GPIO0[9] - External Bus Controller Ready Input
|
|
* GPIO0[10] - CRAM Adv Output
|
|
* GPIO0[11-24] - NAND Flash Control Data -> Bypasses GPIO when enabled
|
|
* GPIO0[25] - External DMA Request Input
|
|
* GPIO0[26] - External DMA EOT I/O
|
|
* GPIO0[25] - External DMA Ack_n Output
|
|
* GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
|
|
* GPIO0[28-30] - Trace Outputs / PWM Inputs
|
|
* GPIO0[31] - PWM_8 I/O
|
|
*/
|
|
#define CONFIG_SYS_GPIO0_TCR 0xC0A00000
|
|
#define CONFIG_SYS_GPIO0_OSRL 0x50004400
|
|
#define CONFIG_SYS_GPIO0_OSRH 0x02000055
|
|
#define CONFIG_SYS_GPIO0_ISR1L 0x00001000
|
|
#define CONFIG_SYS_GPIO0_ISR1H 0x00000055
|
|
#define CONFIG_SYS_GPIO0_TSRL 0x02000000
|
|
#define CONFIG_SYS_GPIO0_TSRH 0x00000055
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for GPIO_1 setup (PPC405EZ specific)
|
|
*
|
|
* GPIO1[0-6] - PWM_9 to PWM_15 I/O
|
|
* GPIO1[7] - PWM_DIV_CLK (Out) / IRQ4 Input
|
|
* GPIO1[8] - TS5 Output / DAC_IP_TRIG Input
|
|
* GPIO1[9] - TS6 Output / ADC_IP_TRIG Input
|
|
* GPIO1[10-12] - UART0 Control Inputs
|
|
* GPIO1[13] - UART0_DTR_N Output/IEEE_1588_TS Output/TMRCLK Input
|
|
* GPIO1[14] - UART0_RTS_N Output/SPI_SS_2_N Output
|
|
* GPIO1[15] - SPI_SS_3_N Output/UART0_RI_N Input
|
|
* GPIO1[16] - SPI_SS_1_N Output
|
|
* GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
|
|
*/
|
|
#define CONFIG_SYS_GPIO1_TCR 0xFFFF8414
|
|
#define CONFIG_SYS_GPIO1_OSRL 0x40000110
|
|
#define CONFIG_SYS_GPIO1_OSRH 0x55455555
|
|
#define CONFIG_SYS_GPIO1_ISR1L 0x15555445
|
|
#define CONFIG_SYS_GPIO1_ISR1H 0x00000000
|
|
#define CONFIG_SYS_GPIO1_TSRL 0x00000000
|
|
#define CONFIG_SYS_GPIO1_TSRH 0x00000000
|
|
|
|
#endif /* __CONFIG_H */
|