mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Ye.Li](/assets/img/avatar_default.png)
Checking the pre_periph_clk_sel and pre_periph2_clk of CCM CBCMR register, if the PLL2 PFD0 or PLL2 PFD2 is used for the clock source, do not reset this PFD to avoid system hang. Customers may set this in DDR script or use BT_FREQ to select low freq boot. Signed-off-by: Ye.Li <B37916@freescale.com>
497 lines
12 KiB
C
497 lines
12 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Sascha Hauer, Pengutronix
|
|
*
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/pl310.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/imx-common/boot_mode.h>
|
|
#include <asm/imx-common/dma.h>
|
|
#include <stdbool.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
|
|
enum ldo_reg {
|
|
LDO_ARM,
|
|
LDO_SOC,
|
|
LDO_PU,
|
|
};
|
|
|
|
struct scu_regs {
|
|
u32 ctrl;
|
|
u32 config;
|
|
u32 status;
|
|
u32 invalidate;
|
|
u32 fpga_rev;
|
|
};
|
|
|
|
u32 get_nr_cpus(void)
|
|
{
|
|
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
|
|
return readl(&scu->config) & 3;
|
|
}
|
|
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
|
|
u32 reg = readl(&anatop->digprog_sololite);
|
|
u32 type = ((reg >> 16) & 0xff);
|
|
|
|
if (type != MXC_CPU_MX6SL) {
|
|
reg = readl(&anatop->digprog);
|
|
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
|
|
u32 cfg = readl(&scu->config) & 3;
|
|
type = ((reg >> 16) & 0xff);
|
|
if (type == MXC_CPU_MX6DL) {
|
|
if (!cfg)
|
|
type = MXC_CPU_MX6SOLO;
|
|
}
|
|
|
|
if (type == MXC_CPU_MX6Q) {
|
|
if (cfg == 1)
|
|
type = MXC_CPU_MX6D;
|
|
}
|
|
|
|
}
|
|
reg &= 0xff; /* mx6 silicon revision */
|
|
return (type << 12) | (reg + 0x10);
|
|
}
|
|
|
|
#ifdef CONFIG_REVISION_TAG
|
|
u32 __weak get_board_rev(void)
|
|
{
|
|
u32 cpurev = get_cpu_rev();
|
|
u32 type = ((cpurev >> 12) & 0xff);
|
|
if (type == MXC_CPU_MX6SOLO)
|
|
cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
|
|
|
|
if (type == MXC_CPU_MX6D)
|
|
cpurev = (MXC_CPU_MX6Q) << 12 | (cpurev & 0xFFF);
|
|
|
|
return cpurev;
|
|
}
|
|
#endif
|
|
|
|
void init_aips(void)
|
|
{
|
|
struct aipstz_regs *aips1, *aips2;
|
|
#ifdef CONFIG_MX6SX
|
|
struct aipstz_regs *aips3;
|
|
#endif
|
|
|
|
aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
|
|
aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
|
|
#ifdef CONFIG_MX6SX
|
|
aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR;
|
|
#endif
|
|
|
|
/*
|
|
* Set all MPROTx to be non-bufferable, trusted for R/W,
|
|
* not forced to user-mode.
|
|
*/
|
|
writel(0x77777777, &aips1->mprot0);
|
|
writel(0x77777777, &aips1->mprot1);
|
|
writel(0x77777777, &aips2->mprot0);
|
|
writel(0x77777777, &aips2->mprot1);
|
|
|
|
/*
|
|
* Set all OPACRx to be non-bufferable, not require
|
|
* supervisor privilege level for access,allow for
|
|
* write access and untrusted master access.
|
|
*/
|
|
writel(0x00000000, &aips1->opacr0);
|
|
writel(0x00000000, &aips1->opacr1);
|
|
writel(0x00000000, &aips1->opacr2);
|
|
writel(0x00000000, &aips1->opacr3);
|
|
writel(0x00000000, &aips1->opacr4);
|
|
writel(0x00000000, &aips2->opacr0);
|
|
writel(0x00000000, &aips2->opacr1);
|
|
writel(0x00000000, &aips2->opacr2);
|
|
writel(0x00000000, &aips2->opacr3);
|
|
writel(0x00000000, &aips2->opacr4);
|
|
|
|
#ifdef CONFIG_MX6SX
|
|
/*
|
|
* Set all MPROTx to be non-bufferable, trusted for R/W,
|
|
* not forced to user-mode.
|
|
*/
|
|
writel(0x77777777, &aips3->mprot0);
|
|
writel(0x77777777, &aips3->mprot1);
|
|
|
|
/*
|
|
* Set all OPACRx to be non-bufferable, not require
|
|
* supervisor privilege level for access,allow for
|
|
* write access and untrusted master access.
|
|
*/
|
|
writel(0x00000000, &aips3->opacr0);
|
|
writel(0x00000000, &aips3->opacr1);
|
|
writel(0x00000000, &aips3->opacr2);
|
|
writel(0x00000000, &aips3->opacr3);
|
|
writel(0x00000000, &aips3->opacr4);
|
|
#endif
|
|
}
|
|
|
|
static void clear_ldo_ramp(void)
|
|
{
|
|
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
|
|
int reg;
|
|
|
|
/* ROM may modify LDO ramp up time according to fuse setting, so in
|
|
* order to be in the safe side we neeed to reset these settings to
|
|
* match the reset value: 0'b00
|
|
*/
|
|
reg = readl(&anatop->ana_misc2);
|
|
reg &= ~(0x3f << 24);
|
|
writel(reg, &anatop->ana_misc2);
|
|
}
|
|
|
|
/*
|
|
* Set the PMU_REG_CORE register
|
|
*
|
|
* Set LDO_SOC/PU/ARM regulators to the specified millivolt level.
|
|
* Possible values are from 0.725V to 1.450V in steps of
|
|
* 0.025V (25mV).
|
|
*/
|
|
static int set_ldo_voltage(enum ldo_reg ldo, u32 mv)
|
|
{
|
|
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
|
|
u32 val, step, old, reg = readl(&anatop->reg_core);
|
|
u8 shift;
|
|
|
|
if (mv < 725)
|
|
val = 0x00; /* Power gated off */
|
|
else if (mv > 1450)
|
|
val = 0x1F; /* Power FET switched full on. No regulation */
|
|
else
|
|
val = (mv - 700) / 25;
|
|
|
|
clear_ldo_ramp();
|
|
|
|
switch (ldo) {
|
|
case LDO_SOC:
|
|
shift = 18;
|
|
break;
|
|
case LDO_PU:
|
|
shift = 9;
|
|
break;
|
|
case LDO_ARM:
|
|
shift = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
old = (reg & (0x1F << shift)) >> shift;
|
|
step = abs(val - old);
|
|
if (step == 0)
|
|
return 0;
|
|
|
|
reg = (reg & ~(0x1F << shift)) | (val << shift);
|
|
writel(reg, &anatop->reg_core);
|
|
|
|
/*
|
|
* The LDO ramp-up is based on 64 clock cycles of 24 MHz = 2.6 us per
|
|
* step
|
|
*/
|
|
udelay(3 * step);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx_set_wdog_powerdown(bool enable)
|
|
{
|
|
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
|
|
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
|
|
|
|
/* Write to the PDE (Power Down Enable) bit */
|
|
writew(enable, &wdog1->wmcr);
|
|
writew(enable, &wdog2->wmcr);
|
|
}
|
|
|
|
static void set_ahb_rate(u32 val)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
u32 reg, div;
|
|
|
|
div = get_periph_clk() / val - 1;
|
|
reg = readl(&mxc_ccm->cbcdr);
|
|
|
|
writel((reg & (~MXC_CCM_CBCDR_AHB_PODF_MASK)) |
|
|
(div << MXC_CCM_CBCDR_AHB_PODF_OFFSET), &mxc_ccm->cbcdr);
|
|
}
|
|
|
|
static void clear_mmdc_ch_mask(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
/* Clear MMDC channel mask */
|
|
writel(0, &mxc_ccm->ccdr);
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
init_aips();
|
|
|
|
/* Need to clear MMDC_CHx_MASK to make warm reset work. */
|
|
clear_mmdc_ch_mask();
|
|
|
|
/*
|
|
* When low freq boot is enabled, ROM will not set AHB
|
|
* freq, so we need to ensure AHB freq is 132MHz in such
|
|
* scenario.
|
|
*/
|
|
if (mxc_get_clock(MXC_ARM_CLK) == 396000000)
|
|
set_ahb_rate(132000000);
|
|
|
|
imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
|
|
|
|
#ifdef CONFIG_APBH_DMA
|
|
/* Start APBH DMA */
|
|
mxs_dma_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_postclk_init(void)
|
|
{
|
|
set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
void enable_caches(void)
|
|
{
|
|
#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
|
|
enum dcache_option option = DCACHE_WRITETHROUGH;
|
|
#else
|
|
enum dcache_option option = DCACHE_WRITEBACK;
|
|
#endif
|
|
|
|
/* Avoid random hang when download by usb */
|
|
invalidate_dcache_all();
|
|
|
|
/* Enable D-cache. I-cache is already enabled in start.S */
|
|
dcache_enable();
|
|
|
|
/* Enable caching on OCRAM and ROM */
|
|
mmu_set_region_dcache_behaviour(ROMCP_ARB_BASE_ADDR,
|
|
ROMCP_ARB_END_ADDR,
|
|
option);
|
|
mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR,
|
|
IRAM_SIZE,
|
|
option);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_FEC_MXC)
|
|
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
|
|
{
|
|
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
|
|
struct fuse_bank *bank = &ocotp->bank[4];
|
|
struct fuse_bank4_regs *fuse =
|
|
(struct fuse_bank4_regs *)bank->fuse_regs;
|
|
|
|
u32 value = readl(&fuse->mac_addr_high);
|
|
mac[0] = (value >> 8);
|
|
mac[1] = value ;
|
|
|
|
value = readl(&fuse->mac_addr_low);
|
|
mac[2] = value >> 24 ;
|
|
mac[3] = value >> 16 ;
|
|
mac[4] = value >> 8 ;
|
|
mac[5] = value ;
|
|
|
|
}
|
|
#endif
|
|
|
|
void boot_mode_apply(unsigned cfg_val)
|
|
{
|
|
unsigned reg;
|
|
struct src *psrc = (struct src *)SRC_BASE_ADDR;
|
|
writel(cfg_val, &psrc->gpr9);
|
|
reg = readl(&psrc->gpr10);
|
|
if (cfg_val)
|
|
reg |= 1 << 28;
|
|
else
|
|
reg &= ~(1 << 28);
|
|
writel(reg, &psrc->gpr10);
|
|
}
|
|
/*
|
|
* cfg_val will be used for
|
|
* Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
|
|
* After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
|
|
* to SBMR1, which will determine the boot device.
|
|
*/
|
|
const struct boot_mode soc_boot_modes[] = {
|
|
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
|
|
/* reserved value should start rom usb */
|
|
{"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
|
|
{"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
|
|
{"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
|
|
{"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
|
|
{"ecspi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
|
|
{"ecspi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
|
|
/* 4 bit bus width */
|
|
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
|
|
{"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
|
|
{"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
|
|
{"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
|
|
{NULL, 0},
|
|
};
|
|
|
|
void s_init(void)
|
|
{
|
|
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
u32 mask480;
|
|
u32 mask528;
|
|
u32 reg, periph1, periph2;
|
|
|
|
if (is_cpu_type(MXC_CPU_MX6SX))
|
|
return;
|
|
|
|
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
|
|
* to make sure PFD is working right, otherwise, PFDs may
|
|
* not output clock after reset, MX6DL and MX6SL have added 396M pfd
|
|
* workaround in ROM code, as bus clock need it
|
|
*/
|
|
|
|
mask480 = ANATOP_PFD_CLKGATE_MASK(0) |
|
|
ANATOP_PFD_CLKGATE_MASK(1) |
|
|
ANATOP_PFD_CLKGATE_MASK(2) |
|
|
ANATOP_PFD_CLKGATE_MASK(3);
|
|
mask528 = ANATOP_PFD_CLKGATE_MASK(1) |
|
|
ANATOP_PFD_CLKGATE_MASK(3);
|
|
|
|
reg = readl(&ccm->cbcmr);
|
|
periph2 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK)
|
|
>> MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET);
|
|
periph1 = ((reg & MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK)
|
|
>> MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET);
|
|
|
|
/* Checking if PLL2 PFD0 or PLL2 PFD2 is using for periph clock */
|
|
if ((periph2 != 0x2) && (periph1 != 0x2))
|
|
mask528 |= ANATOP_PFD_CLKGATE_MASK(0);
|
|
|
|
if ((periph2 != 0x1) && (periph1 != 0x1) &&
|
|
(periph2 != 0x3) && (periph1 != 0x3))
|
|
mask528 |= ANATOP_PFD_CLKGATE_MASK(2);
|
|
|
|
writel(mask480, &anatop->pfd_480_set);
|
|
writel(mask528, &anatop->pfd_528_set);
|
|
writel(mask480, &anatop->pfd_480_clr);
|
|
writel(mask528, &anatop->pfd_528_clr);
|
|
}
|
|
|
|
#ifdef CONFIG_IMX_HDMI
|
|
void imx_enable_hdmi_phy(void)
|
|
{
|
|
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
|
|
u8 reg;
|
|
reg = readb(&hdmi->phy_conf0);
|
|
reg |= HDMI_PHY_CONF0_PDZ_MASK;
|
|
writeb(reg, &hdmi->phy_conf0);
|
|
udelay(3000);
|
|
reg |= HDMI_PHY_CONF0_ENTMDS_MASK;
|
|
writeb(reg, &hdmi->phy_conf0);
|
|
udelay(3000);
|
|
reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK;
|
|
writeb(reg, &hdmi->phy_conf0);
|
|
writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz);
|
|
}
|
|
|
|
void imx_setup_hdmi(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
|
|
int reg;
|
|
|
|
/* Turn on HDMI PHY clock */
|
|
reg = readl(&mxc_ccm->CCGR2);
|
|
reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK|
|
|
MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK;
|
|
writel(reg, &mxc_ccm->CCGR2);
|
|
writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz);
|
|
reg = readl(&mxc_ccm->chsccdr);
|
|
reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK|
|
|
MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK|
|
|
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
|
|
reg |= (CHSCCDR_PODF_DIVIDE_BY_3
|
|
<< MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
|
|
|(CHSCCDR_IPU_PRE_CLK_540M_PFD
|
|
<< MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->chsccdr);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_L2CACHE_OFF
|
|
#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
|
|
void v7_outer_cache_enable(void)
|
|
{
|
|
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
|
|
unsigned int val;
|
|
|
|
#if defined CONFIG_MX6SL
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
val = readl(&iomux->gpr[11]);
|
|
if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
|
|
/* L2 cache configured as OCRAM, reset it */
|
|
val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
|
|
writel(val, &iomux->gpr[11]);
|
|
}
|
|
#endif
|
|
|
|
/* Must disable the L2 before changing the latency parameters */
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
|
|
writel(0x132, &pl310->pl310_tag_latency_ctrl);
|
|
writel(0x132, &pl310->pl310_data_latency_ctrl);
|
|
|
|
val = readl(&pl310->pl310_prefetch_ctrl);
|
|
|
|
/* Turn on the L2 I/D prefetch */
|
|
val |= 0x30000000;
|
|
|
|
/*
|
|
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
|
|
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
|
|
* But according to ARM PL310 errata: 752271
|
|
* ID: 752271: Double linefill feature can cause data corruption
|
|
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
|
|
* Workaround: The only workaround to this erratum is to disable the
|
|
* double linefill feature. This is the default behavior.
|
|
*/
|
|
|
|
#ifndef CONFIG_MX6Q
|
|
val |= 0x40800000;
|
|
#endif
|
|
writel(val, &pl310->pl310_prefetch_ctrl);
|
|
|
|
val = readl(&pl310->pl310_power_ctrl);
|
|
val |= L2X0_DYNAMIC_CLK_GATING_EN;
|
|
val |= L2X0_STNDBY_MODE_EN;
|
|
writel(val, &pl310->pl310_power_ctrl);
|
|
|
|
setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
|
|
void v7_outer_cache_disable(void)
|
|
{
|
|
struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
|
|
|
|
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
|
|
}
|
|
#endif /* !CONFIG_SYS_L2CACHE_OFF */
|