mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
200 lines
12 KiB
C
200 lines
12 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2017 Armadeus Systems
|
|
*
|
|
* Configuration settings for the OPOS6ULDev board
|
|
*/
|
|
|
|
#ifndef __OPOS6ULDEV_CONFIG_H
|
|
#define __OPOS6ULDEV_CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#ifdef CONFIG_SPL
|
|
#include "imx6_spl.h"
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_DM_REGULATOR
|
|
#endif
|
|
#endif
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (16 << 20)
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* USB */
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#endif
|
|
|
|
/* LCD */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#ifdef CONFIG_DM_VIDEO
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_SPLASH_SOURCE
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#define CONFIG_BMP_16BPP
|
|
#define CONFIG_BMP_24BPP
|
|
#define CONFIG_BMP_32BPP
|
|
#define CONFIG_VIDEO_MXS
|
|
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
|
|
#endif
|
|
#endif
|
|
|
|
/* Environment is stored in the eMMC boot partition */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_SYS_MMC_ENV_PART 1
|
|
|
|
#define CONFIG_ENV_VERSION 100
|
|
#define CONFIG_BOARD_NAME opos6ul
|
|
#define ACFG_CONSOLE_DEV ttymxc0
|
|
#define CONFIG_SYS_AUTOLOAD "no"
|
|
#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
|
|
#define CONFIG_BOOTCOMMAND "run emmcboot"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
|
|
"consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
|
|
"board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
|
|
"fdt_addr=0x88000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"ip_dyn=yes\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcpart=2\0" \
|
|
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
|
|
"splashpos=0,0\0" \
|
|
"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
|
|
"check_env=if test -n ${flash_env_version}; " \
|
|
"then env default env_version; " \
|
|
"else env set flash_env_version ${env_version}; env save; " \
|
|
"fi; " \
|
|
"if itest ${flash_env_version} != ${env_version}; then " \
|
|
"echo \"*** Warning - Environment version" \
|
|
" change suggests: run flash_reset_env; reset\"; " \
|
|
"env default flash_reset_env; " \
|
|
"else exit; fi; \0" \
|
|
"flash_reset_env=env default -f -a && saveenv && " \
|
|
"echo Environment variables erased!\0" \
|
|
"download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl\0" \
|
|
"flash_uboot_spl=" \
|
|
"if mmc dev 0 1; then " \
|
|
"setexpr sz ${filesize} / 0x200; " \
|
|
"setexpr sz ${sz} + 1; " \
|
|
"if mmc write ${loadaddr} 0x2 ${sz}; then " \
|
|
"echo Flashing of U-boot SPL succeed; " \
|
|
"else echo Flashing of U-boot SPL failed; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img\0" \
|
|
"flash_uboot_img=" \
|
|
"if mmc dev 0 1; then " \
|
|
"setexpr sz ${filesize} / 0x200; " \
|
|
"setexpr sz ${sz} + 1; " \
|
|
"if mmc write ${loadaddr} 0x8a ${sz}; then " \
|
|
"echo Flashing of U-boot image succeed; " \
|
|
"else echo Flashing of U-boot image failed; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"update_uboot=run download_uboot_spl flash_uboot_spl " \
|
|
"download_uboot_img flash_uboot_img\0" \
|
|
"download_kernel=tftpboot ${loadaddr} ${kernelimg}\0" \
|
|
"flash_kernel=" \
|
|
"if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then " \
|
|
"echo kernel update succeed; " \
|
|
"else echo kernel update failed; " \
|
|
"fi;\0" \
|
|
"update_kernel=run download_kernel flash_kernel\0" \
|
|
"download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb\0" \
|
|
"flash_dtb=" \
|
|
"if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then " \
|
|
"echo dtb update succeed; " \
|
|
"else echo dtb update in failed; " \
|
|
"fi;\0" \
|
|
"update_dtb=run download_dtb flash_dtb\0" \
|
|
"download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4\0" \
|
|
"flash_rootfs=" \
|
|
"if mmc dev 0 0; then " \
|
|
"setexpr nbblocks ${filesize} / 0x200; " \
|
|
"setexpr nbblocks ${nbblocks} + 1; " \
|
|
"if mmc write ${loadaddr} 0x40800 ${nbblocks}; then " \
|
|
"echo Flashing of rootfs image succeed; " \
|
|
"else echo Flashing of rootfs image failed; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"update_rootfs=run download_rootfs flash_rootfs\0" \
|
|
"flash_failsafe=" \
|
|
"if mmc dev 0 0; then " \
|
|
"setexpr nbblocks ${filesize} / 0x200; " \
|
|
"setexpr nbblocks ${nbblocks} + 1; " \
|
|
"if mmc write ${loadaddr} 0x800 ${nbblocks}; then " \
|
|
"echo Flashing of rootfs image in failsafe partition succeed; " \
|
|
"else echo Flashing of rootfs image in failsafe partition failed; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"update_failsafe=run download_rootfs flash_failsafe\0" \
|
|
"download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4\0" \
|
|
"flash_userdata=" \
|
|
"if mmc dev 0 0; then " \
|
|
"setexpr nbblocks ${filesize} / 0x200; " \
|
|
"setexpr nbblocks ${nbblocks} + 1; " \
|
|
"if mmc write ${loadaddr} 0 ${nbblocks}; then " \
|
|
"echo Flashing of user_data image succeed; " \
|
|
"else echo Flashing of user_data image failed; " \
|
|
"fi; " \
|
|
"fi;\0" \
|
|
"update_userdata=run download_userdata flash_userdata; mmc rescan\0" \
|
|
"erase_userdata=" \
|
|
"if mmc dev 0 0; then " \
|
|
"echo Erasing eMMC User Data partition, no way out...; " \
|
|
"mw ${loadaddr} 0 0x200000; " \
|
|
"mmc write ${loadaddr} 0 0x1000; " \
|
|
"mmc write ${loadaddr} 0x800 0x1000; " \
|
|
"mmc write ${loadaddr} 0x40800 0x1000; " \
|
|
"mmc write ${loadaddr} 0x440800 0x1000; " \
|
|
"fi;" \
|
|
"mmc rescan\0" \
|
|
"update_all=run update_rootfs update_uboot\0" \
|
|
"initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs}\0" \
|
|
"addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
|
|
"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
|
|
"addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"emmcboot=run initargs; run addmmcargs; " \
|
|
"load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && " \
|
|
"load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && " \
|
|
"bootz ${loadaddr} - ${fdt_addr};\0" \
|
|
"emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot;\0" \
|
|
"addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"nfsboot=run initargs; run addnfsargs addipargs; " \
|
|
"nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && " \
|
|
"nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && " \
|
|
"bootz ${loadaddr} - ${fdt_addr};\0"
|
|
|
|
#endif /* __OPOS6ULDEV_CONFIG_H */
|