mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
At present buildman defaults to running 'mrproper' on every thread before it starts building commits for each board. This can add a delay of about 5 seconds to the start of the process, since the tools and other invariants must be rebuilt. In particular, a build without '-b', to build current source, runs much slower without -I, since any existing build is removed, thus losing the possibility of an incremental build. Partly this behaviour was to avoid strange build-system problems caused by running 'make defconfig' for one board and then one with a different architecture. But these problems were fixed quite a while ago. The -I option (which disabled mrproper) was introduced four years ago and does not seem to cause any problems with builds. So make -I the default and deprecate the option. To allow use of 'mrproper', add a new -m flag. Signed-off-by: Simon Glass <sjg@chromium.org>
1253 lines
59 KiB
Plaintext
1253 lines
59 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0+
|
|
# Copyright (c) 2013 The Chromium OS Authors.
|
|
|
|
(Please read 'How to change from MAKEALL' if you are used to that tool)
|
|
|
|
Quick-start
|
|
===========
|
|
|
|
If you just want to quickly set up buildman so you can build something (for
|
|
example Raspberry Pi 2):
|
|
|
|
cd /path/to/u-boot
|
|
PATH=$PATH:`pwd`/tools/buildman
|
|
buildman --fetch-arch arm
|
|
buildman -k rpi_2
|
|
ls ../current/rpi_2
|
|
# u-boot.bin is the output image
|
|
|
|
|
|
What is this?
|
|
=============
|
|
|
|
This tool handles building U-Boot to check that you have not broken it
|
|
with your patch series. It can build each individual commit and report
|
|
which boards fail on which commits, and which errors come up. It aims
|
|
to make full use of multi-processor machines.
|
|
|
|
A key feature of buildman is its output summary, which allows warnings,
|
|
errors or image size increases in a particular commit or board to be
|
|
quickly identified and the offending commit pinpointed. This can be a big
|
|
help for anyone working with >10 patches at a time.
|
|
|
|
|
|
Caveats
|
|
=======
|
|
|
|
Buildman can be stopped and restarted, in which case it will continue
|
|
where it left off. This should happen cleanly and without side-effects.
|
|
If not, it is a bug, for which a patch would be welcome.
|
|
|
|
Buildman gets so tied up in its work that it can ignore the outside world.
|
|
You may need to press Ctrl-C several times to quit it. Also it will print
|
|
out various exceptions when stopped. You may have to kill it since the
|
|
Ctrl-C handling is somewhat broken.
|
|
|
|
|
|
Theory of Operation
|
|
===================
|
|
|
|
(please read this section in full twice or you will be perpetually confused)
|
|
|
|
Buildman is a builder. It is not make, although it runs make. It does not
|
|
produce any useful output on the terminal while building, except for
|
|
progress information (but see -v below). All the output (errors, warnings and
|
|
binaries if you ask for them) is stored in output directories, which you can
|
|
look at from a separate 'buildman -s' instance while the build is progressing,
|
|
or when it is finished.
|
|
|
|
Buildman is designed to build entire git branches, i.e. muliple commits. It
|
|
can be run repeatedly on the same branch after making changes to commits on
|
|
that branch. In this case it will automatically rebuild commits which have
|
|
changed (and remove its old results for that commit). It is possible to build
|
|
a branch for one board, then later build it for another board. This adds to
|
|
the output, so now you have results for two boards. If you want buildman to
|
|
re-build a commit it has already built (e.g. because of a toolchain update),
|
|
use the -f flag.
|
|
|
|
Buildman produces a concise summary of which boards succeeded and failed.
|
|
It shows which commit introduced which board failure using a simple
|
|
red/green colour coding (with yellow/cyan for warnings). Full error
|
|
information can be requested, in which case it is de-duped and displayed
|
|
against the commit that introduced the error. An example workflow is below.
|
|
|
|
Buildman stores image size information and can report changes in image size
|
|
from commit to commit. An example of this is below.
|
|
|
|
Buildman starts multiple threads, and each thread builds for one board at
|
|
a time. A thread starts at the first commit, configures the source for your
|
|
board and builds it. Then it checks out the next commit and does an
|
|
incremental build (i.e. not using 'make xxx_defconfig' unless you use -C).
|
|
Eventually the thread reaches the last commit and stops. If a commit causes
|
|
an error or warning, buildman will try it again after reconfiguring (but see
|
|
-Q). Thus some commits may be built twice, with the first result silently
|
|
discarded. Lots of errors and warnings will causes lots of reconfigures and your
|
|
build will be very slow. This is because a file that produces just a warning
|
|
would not normally be rebuilt in an incremental build. Once a thread finishes
|
|
building all the commits for a board, it starts on the commits for another
|
|
board.
|
|
|
|
Buildman works in an entirely separate place from your U-Boot repository.
|
|
It creates a separate working directory for each thread, and puts the
|
|
output files in the working directory, organised by commit name and board
|
|
name, in a two-level hierarchy (but see -P).
|
|
|
|
Buildman is invoked in your U-Boot directory, the one with the .git
|
|
directory. It clones this repository into a copy for each thread, and the
|
|
threads do not affect the state of your git repository. Any checkouts done
|
|
by the thread affect only the working directory for that thread.
|
|
|
|
Buildman automatically selects the correct tool chain for each board. You
|
|
must supply suitable tool chains (see --fetch-arch), but buildman takes care
|
|
of selecting the right one.
|
|
|
|
Buildman generally builds a branch (with the -b flag), and in this case
|
|
builds the upstream commit as well, for comparison. So even if you have one
|
|
commit in your branch, two commits will be built. Put all your commits in a
|
|
branch, set the branch's upstream to a valid value, and all will be well.
|
|
Otherwise buildman will perform random actions. Use -n to check what the
|
|
random actions might be.
|
|
|
|
Buildman effectively has two modes: without -s it builds, with -s it
|
|
summarises the results of previous (or active) builds.
|
|
|
|
If you just want to build the current source tree, leave off the -b flag.
|
|
This will display results and errors as they happen. You can still look at
|
|
them later using -se. Note that buildman will assume that the source has
|
|
changed, and will build all specified boards in this case.
|
|
|
|
Buildman is optimised for building many commits at once, for many boards.
|
|
On multi-core machines, Buildman is fast because it uses most of the
|
|
available CPU power. When it gets to the end, or if you are building just
|
|
a few commits or boards, it will be pretty slow. As a tip, if you don't
|
|
plan to use your machine for anything else, you can use -T to increase the
|
|
number of threads beyond the default.
|
|
|
|
|
|
Selecting which boards to build
|
|
===============================
|
|
|
|
Buildman lets you build all boards, or a subset. Specify the subset by passing
|
|
command-line arguments that list the desired board name, architecture name,
|
|
SOC name, or anything else in the boards.cfg file. Multiple arguments are
|
|
allowed. Each argument will be interpreted as a regular expression, so
|
|
behaviour is a superset of exact or substring matching. Examples are:
|
|
|
|
* 'tegra20' All boards with a Tegra20 SoC
|
|
* 'tegra' All boards with any Tegra Soc (Tegra20, Tegra30, Tegra114...)
|
|
* '^tegra[23]0$' All boards with either Tegra20 or Tegra30 SoC
|
|
* 'powerpc' All PowerPC boards
|
|
|
|
While the default is to OR the terms together, you can also make use of
|
|
the '&' operator to limit the selection:
|
|
|
|
* 'freescale & arm sandbox' All Freescale boards with ARM architecture,
|
|
plus sandbox
|
|
|
|
You can also use -x to specifically exclude some boards. For example:
|
|
|
|
buildman arm -x nvidia,freescale,.*ball$
|
|
|
|
means to build all arm boards except nvidia, freescale and anything ending
|
|
with 'ball'.
|
|
|
|
For building specific boards you can use the --boards (or --bo) option, which
|
|
takes a comma-separated list of board target names and be used multiple times
|
|
on the command line:
|
|
|
|
buildman --boards sandbox,snow --boards
|
|
|
|
It is convenient to use the -n option to see what will be built based on
|
|
the subset given. Use -v as well to get an actual list of boards.
|
|
|
|
Buildman does not store intermediate object files. It optionally copies
|
|
the binary output into a directory when a build is successful (-k). Size
|
|
information is always recorded. It needs a fair bit of disk space to work,
|
|
typically 250MB per thread.
|
|
|
|
|
|
Setting up
|
|
==========
|
|
|
|
1. Get the U-Boot source. You probably already have it, but if not these
|
|
steps should get you started with a repo and some commits for testing.
|
|
|
|
$ cd /path/to/u-boot
|
|
$ git clone git://git.denx.de/u-boot.git .
|
|
$ git checkout -b my-branch origin/master
|
|
$ # Add some commits to the branch, reading for testing
|
|
|
|
2. Create ~/.buildman to tell buildman where to find tool chains (see 'The
|
|
.buildman file' later for details). As an example:
|
|
|
|
# Buildman settings file
|
|
|
|
[toolchain]
|
|
root: /
|
|
rest: /toolchains/*
|
|
eldk: /opt/eldk-4.2
|
|
arm: /opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.8-2013.08_linux
|
|
aarch64: /opt/linaro/gcc-linaro-aarch64-none-elf-4.8-2013.10_linux
|
|
|
|
[toolchain-alias]
|
|
x86: i386
|
|
blackfin: bfin
|
|
nds32: nds32le
|
|
openrisc: or1k
|
|
|
|
|
|
This selects the available toolchain paths. Add the base directory for
|
|
each of your toolchains here. Buildman will search inside these directories
|
|
and also in any '/usr' and '/usr/bin' subdirectories.
|
|
|
|
Make sure the tags (here root: rest: and eldk:) are unique.
|
|
|
|
The toolchain-alias section indicates that the i386 toolchain should be used
|
|
to build x86 commits.
|
|
|
|
Note that you can also specific exactly toolchain prefixes if you like:
|
|
|
|
[toolchain-prefix]
|
|
arm: /opt/arm-eabi-4.6/bin/arm-eabi-
|
|
|
|
or even:
|
|
|
|
[toolchain-prefix]
|
|
arm: /opt/arm-eabi-4.6/bin/arm-eabi-gcc
|
|
|
|
This tells buildman that you want to use this exact toolchain for the arm
|
|
architecture. This will override any toolchains found by searching using the
|
|
[toolchain] settings.
|
|
|
|
Since the toolchain prefix is an explicit request, buildman will report an
|
|
error if a toolchain is not found with that prefix. The current PATH will be
|
|
searched, so it is possible to use:
|
|
|
|
[toolchain-prefix]
|
|
arm: arm-none-eabi-
|
|
|
|
and buildman will find arm-none-eabi-gcc in /usr/bin if you have it installed.
|
|
|
|
[toolchain-wrapper]
|
|
wrapper: ccache
|
|
|
|
This tells buildman to use a compiler wrapper in front of CROSS_COMPILE. In
|
|
this example, ccache. It doesn't affect the toolchain scan. The wrapper is
|
|
added when CROSS_COMPILE environtal variable is set. The name in this
|
|
section is ignored. If more than one line is provided, only the last one
|
|
is taken.
|
|
|
|
3. Make sure you have the require Python pre-requisites
|
|
|
|
Buildman uses multiprocessing, Queue, shutil, StringIO, ConfigParser and
|
|
urllib2. These should normally be available, but if you get an error like
|
|
this then you will need to obtain those modules:
|
|
|
|
ImportError: No module named multiprocessing
|
|
|
|
|
|
4. Check the available toolchains
|
|
|
|
Run this check to make sure that you have a toolchain for every architecture.
|
|
|
|
$ ./tools/buildman/buildman --list-tool-chains
|
|
Scanning for tool chains
|
|
- scanning prefix '/opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-'
|
|
Tool chain test: OK, arch='x86', priority 1
|
|
- scanning prefix '/opt/arm-eabi-4.6/bin/arm-eabi-'
|
|
Tool chain test: OK, arch='arm', priority 1
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/i386-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/i386-linux/usr/bin'
|
|
Tool chain test: OK, arch='i386', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/aarch64-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/aarch64-linux/usr/bin'
|
|
Tool chain test: OK, arch='aarch64', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/microblaze-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/microblaze-linux/usr/bin'
|
|
Tool chain test: OK, arch='microblaze', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/mips64-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips64-linux/usr/bin'
|
|
Tool chain test: OK, arch='mips64', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/sparc64-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc64-linux/usr/bin'
|
|
Tool chain test: OK, arch='sparc64', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/usr/bin'
|
|
Tool chain test: OK, arch='arm', priority 3
|
|
Toolchain '/toolchains/gcc-4.9.0-nolibc/arm-unknown-linux-gnueabi/bin/arm-unknown-linux-gnueabi-gcc' at priority 3 will be ignored because another toolchain for arch 'arm' has priority 1
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/sparc-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/sparc-linux/usr/bin'
|
|
Tool chain test: OK, arch='sparc', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/mips-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/mips-linux/usr/bin'
|
|
Tool chain test: OK, arch='mips', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/x86_64-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/usr/bin'
|
|
Tool chain test: OK, arch='x86_64', priority 4
|
|
Tool chain test: OK, arch='x86_64', priority 4
|
|
Toolchain '/toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-x86_64-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/m68k-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/m68k-linux/usr/bin'
|
|
Tool chain test: OK, arch='m68k', priority 4
|
|
- scanning path '/toolchains/gcc-4.9.0-nolibc/powerpc-linux'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/.'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin'
|
|
- found '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.9.0-nolibc/powerpc-linux/usr/bin'
|
|
Tool chain test: OK, arch='powerpc', priority 4
|
|
- scanning path '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/.'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin'
|
|
- found '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/bfin-uclinux/usr/bin'
|
|
Tool chain test: OK, arch='bfin', priority 6
|
|
- scanning path '/toolchains/gcc-4.6.3-nolibc/sparc-linux'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/.'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin'
|
|
- found '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/sparc-linux/usr/bin'
|
|
Tool chain test: OK, arch='sparc', priority 4
|
|
Toolchain '/toolchains/gcc-4.6.3-nolibc/sparc-linux/bin/sparc-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'sparc' has priority 4
|
|
- scanning path '/toolchains/gcc-4.6.3-nolibc/mips-linux'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/.'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin'
|
|
- found '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/mips-linux/usr/bin'
|
|
Tool chain test: OK, arch='mips', priority 4
|
|
Toolchain '/toolchains/gcc-4.6.3-nolibc/mips-linux/bin/mips-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'mips' has priority 4
|
|
- scanning path '/toolchains/gcc-4.6.3-nolibc/m68k-linux'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/.'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin'
|
|
- found '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/m68k-linux/usr/bin'
|
|
Tool chain test: OK, arch='m68k', priority 4
|
|
Toolchain '/toolchains/gcc-4.6.3-nolibc/m68k-linux/bin/m68k-linux-gcc' at priority 4 will be ignored because another toolchain for arch 'm68k' has priority 4
|
|
- scanning path '/toolchains/gcc-4.6.3-nolibc/powerpc-linux'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/.'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin'
|
|
- found '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/bin/powerpc-linux-gcc'
|
|
- looking in '/toolchains/gcc-4.6.3-nolibc/powerpc-linux/usr/bin'
|
|
Tool chain test: OK, arch='powerpc', priority 4
|
|
Tool chain test: OK, arch='or32', priority 4
|
|
- scanning path '/'
|
|
- looking in '/.'
|
|
- looking in '/bin'
|
|
- looking in '/usr/bin'
|
|
- found '/usr/bin/i586-mingw32msvc-gcc'
|
|
- found '/usr/bin/c89-gcc'
|
|
- found '/usr/bin/x86_64-linux-gnu-gcc'
|
|
- found '/usr/bin/gcc'
|
|
- found '/usr/bin/c99-gcc'
|
|
- found '/usr/bin/arm-linux-gnueabi-gcc'
|
|
- found '/usr/bin/aarch64-linux-gnu-gcc'
|
|
- found '/usr/bin/winegcc'
|
|
- found '/usr/bin/arm-linux-gnueabihf-gcc'
|
|
Tool chain test: OK, arch='i586', priority 11
|
|
Tool chain test: OK, arch='c89', priority 11
|
|
Tool chain test: OK, arch='x86_64', priority 4
|
|
Toolchain '/usr/bin/x86_64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'x86_64' has priority 4
|
|
Tool chain test: OK, arch='sandbox', priority 11
|
|
Tool chain test: OK, arch='c99', priority 11
|
|
Tool chain test: OK, arch='arm', priority 4
|
|
Toolchain '/usr/bin/arm-linux-gnueabi-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
|
|
Tool chain test: OK, arch='aarch64', priority 4
|
|
Toolchain '/usr/bin/aarch64-linux-gnu-gcc' at priority 4 will be ignored because another toolchain for arch 'aarch64' has priority 4
|
|
Tool chain test: OK, arch='sandbox', priority 11
|
|
Toolchain '/usr/bin/winegcc' at priority 11 will be ignored because another toolchain for arch 'sandbox' has priority 11
|
|
Tool chain test: OK, arch='arm', priority 4
|
|
Toolchain '/usr/bin/arm-linux-gnueabihf-gcc' at priority 4 will be ignored because another toolchain for arch 'arm' has priority 1
|
|
List of available toolchains (34):
|
|
aarch64 : /toolchains/gcc-4.9.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc
|
|
alpha : /toolchains/gcc-4.9.0-nolibc/alpha-linux/bin/alpha-linux-gcc
|
|
am33_2.0 : /toolchains/gcc-4.9.0-nolibc/am33_2.0-linux/bin/am33_2.0-linux-gcc
|
|
arm : /opt/arm-eabi-4.6/bin/arm-eabi-gcc
|
|
bfin : /toolchains/gcc-4.6.3-nolibc/bfin-uclinux/bin/bfin-uclinux-gcc
|
|
c89 : /usr/bin/c89-gcc
|
|
c99 : /usr/bin/c99-gcc
|
|
frv : /toolchains/gcc-4.9.0-nolibc/frv-linux/bin/frv-linux-gcc
|
|
h8300 : /toolchains/gcc-4.9.0-nolibc/h8300-elf/bin/h8300-elf-gcc
|
|
hppa : /toolchains/gcc-4.9.0-nolibc/hppa-linux/bin/hppa-linux-gcc
|
|
hppa64 : /toolchains/gcc-4.9.0-nolibc/hppa64-linux/bin/hppa64-linux-gcc
|
|
i386 : /toolchains/gcc-4.9.0-nolibc/i386-linux/bin/i386-linux-gcc
|
|
i586 : /usr/bin/i586-mingw32msvc-gcc
|
|
ia64 : /toolchains/gcc-4.9.0-nolibc/ia64-linux/bin/ia64-linux-gcc
|
|
m32r : /toolchains/gcc-4.9.0-nolibc/m32r-linux/bin/m32r-linux-gcc
|
|
m68k : /toolchains/gcc-4.9.0-nolibc/m68k-linux/bin/m68k-linux-gcc
|
|
microblaze: /toolchains/gcc-4.9.0-nolibc/microblaze-linux/bin/microblaze-linux-gcc
|
|
mips : /toolchains/gcc-4.9.0-nolibc/mips-linux/bin/mips-linux-gcc
|
|
mips64 : /toolchains/gcc-4.9.0-nolibc/mips64-linux/bin/mips64-linux-gcc
|
|
or32 : /toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc
|
|
powerpc : /toolchains/gcc-4.9.0-nolibc/powerpc-linux/bin/powerpc-linux-gcc
|
|
powerpc64 : /toolchains/gcc-4.9.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc
|
|
ppc64le : /toolchains/gcc-4.9.0-nolibc/ppc64le-linux/bin/ppc64le-linux-gcc
|
|
s390x : /toolchains/gcc-4.9.0-nolibc/s390x-linux/bin/s390x-linux-gcc
|
|
sandbox : /usr/bin/gcc
|
|
sh4 : /toolchains/gcc-4.6.3-nolibc/sh4-linux/bin/sh4-linux-gcc
|
|
sparc : /toolchains/gcc-4.9.0-nolibc/sparc-linux/bin/sparc-linux-gcc
|
|
sparc64 : /toolchains/gcc-4.9.0-nolibc/sparc64-linux/bin/sparc64-linux-gcc
|
|
tilegx : /toolchains/gcc-4.6.2-nolibc/tilegx-linux/bin/tilegx-linux-gcc
|
|
x86 : /opt/gcc-4.6.3-nolibc/x86_64-linux/bin/x86_64-linux-gcc
|
|
x86_64 : /toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-gcc
|
|
|
|
|
|
You can see that everything is covered, even some strange ones that won't
|
|
be used (c88 and c99). This is a feature.
|
|
|
|
|
|
5. Install new toolchains if needed
|
|
|
|
You can download toolchains and update the [toolchain] section of the
|
|
settings file to find them.
|
|
|
|
To make this easier, buildman can automatically download and install
|
|
toolchains from kernel.org. First list the available architectures:
|
|
|
|
$ ./tools/buildman/buildman --fetch-arch list
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.2.4/
|
|
Available architectures: alpha am33_2.0 arm bfin cris crisv32 frv h8300
|
|
hppa hppa64 i386 ia64 m32r m68k mips mips64 or32 powerpc powerpc64 s390x sh4
|
|
sparc sparc64 tilegx x86_64 xtensa
|
|
|
|
Then pick one and download it:
|
|
|
|
$ ./tools/buildman/buildman --fetch-arch or32
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.2/
|
|
Checking: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1/
|
|
Downloading: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.1//x86_64-gcc-4.5.1-nolibc_or32-linux.tar.xz
|
|
Unpacking to: /home/sjg/.buildman-toolchains
|
|
Testing
|
|
- looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/.'
|
|
- looking in '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin'
|
|
- found '/home/sjg/.buildman-toolchains/gcc-4.5.1-nolibc/or32-linux/bin/or32-linux-gcc'
|
|
Tool chain test: OK
|
|
|
|
Or download them all from kernel.org and move them to /toolchains directory,
|
|
|
|
$ ./tools/buildman/buildman --fetch-arch all
|
|
$ sudo mkdir -p /toolchains
|
|
$ sudo mv ~/.buildman-toolchains/*/* /toolchains/
|
|
|
|
For those not available from kernel.org, download from the following links.
|
|
|
|
arc: https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/
|
|
download/arc-2016.09-release/arc_gnu_2016.09_prebuilt_uclibc_le_archs_linux_install.tar.gz
|
|
blackfin: http://sourceforge.net/projects/adi-toolchain/files/
|
|
blackfin-toolchain-elf-gcc-4.5-2014R1_45-RC2.x86_64.tar.bz2
|
|
nds32: http://osdk.andestech.com/packages/
|
|
nds32le-linux-glibc-v1.tgz
|
|
nios2: http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/
|
|
sourceryg++-2015.11-27-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
sh: http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
|
|
renesas-4.4-200-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
|
|
Note openrisc kernel.org toolchain is out of date. Download the latest one from
|
|
http://opencores.org/or1k/OpenRISC_GNU_tool_chain#Prebuilt_versions - eg:
|
|
ftp://ocuser:ocuser@openrisc.opencores.org/toolchain/gcc-or1k-elf-4.8.1-x86.tar.bz2.
|
|
|
|
Buildman should now be set up to use your new toolchain.
|
|
|
|
At the time of writing, U-Boot has these architectures:
|
|
|
|
arc, arm, blackfin, m68k, microblaze, mips, nds32, nios2, openrisc
|
|
powerpc, sandbox, sh, sparc, x86
|
|
|
|
Of these, only arc and nds32 are not available at kernel.org..
|
|
|
|
|
|
How to run it
|
|
=============
|
|
|
|
First do a dry run using the -n flag: (replace <branch> with a real, local
|
|
branch with a valid upstream)
|
|
|
|
$ ./tools/buildman/buildman -b <branch> -n
|
|
|
|
If it can't detect the upstream branch, try checking out the branch, and
|
|
doing something like 'git branch --set-upstream-to upstream/master'
|
|
or something similar. Buildman will try to guess a suitable upstream branch
|
|
if it can't find one (you will see a message like" Guessing upstream as ...).
|
|
You can also use the -c option to manually specify the number of commits to
|
|
build.
|
|
|
|
As an example:
|
|
|
|
Dry run, so not doing much. But I would do this:
|
|
|
|
Building 18 commits for 1059 boards (4 threads, 1 job per thread)
|
|
Build directory: ../lcd9b
|
|
5bb3505 Merge branch 'master' of git://git.denx.de/u-boot-arm
|
|
c18f1b4 tegra: Use const for pinmux_config_pingroup/table()
|
|
2f043ae tegra: Add display support to funcmux
|
|
e349900 tegra: fdt: Add pwm binding and node
|
|
424a5f0 tegra: fdt: Add LCD definitions for Tegra
|
|
0636ccf tegra: Add support for PWM
|
|
a994fe7 tegra: Add SOC support for display/lcd
|
|
fcd7350 tegra: Add LCD driver
|
|
4d46e9d tegra: Add LCD support to Nvidia boards
|
|
991bd48 arm: Add control over cachability of memory regions
|
|
54e8019 lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
|
|
d92aff7 lcd: Add support for flushing LCD fb from dcache after update
|
|
dbd0677 tegra: Align LCD frame buffer to section boundary
|
|
0cff9b8 tegra: Support control of cache settings for LCD
|
|
9c56900 tegra: fdt: Add LCD definitions for Seaboard
|
|
5cc29db lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
|
|
cac5a23 tegra: Enable display/lcd support on Seaboard
|
|
49ff541 wip
|
|
|
|
Total boards to build for each commit: 1059
|
|
|
|
This shows that it will build all 1059 boards, using 4 threads (because
|
|
we have a 4-core CPU). Each thread will run with -j1, meaning that each
|
|
make job will use a single CPU. The list of commits to be built helps you
|
|
confirm that things look about right. Notice that buildman has chosen a
|
|
'base' directory for you, immediately above your source tree.
|
|
|
|
Buildman works entirely inside the base directory, here ../lcd9b,
|
|
creating a working directory for each thread, and creating output
|
|
directories for each commit and board.
|
|
|
|
|
|
Suggested Workflow
|
|
==================
|
|
|
|
To run the build for real, take off the -n:
|
|
|
|
$ ./tools/buildman/buildman -b <branch>
|
|
|
|
Buildman will set up some working directories, and get started. After a
|
|
minute or so it will settle down to a steady pace, with a display like this:
|
|
|
|
Building 18 commits for 1059 boards (4 threads, 1 job per thread)
|
|
528 36 124 /19062 -18374 1:13:30 : SIMPC8313_SP
|
|
|
|
This means that it is building 19062 board/commit combinations. So far it
|
|
has managed to successfully build 528. Another 36 have built with warnings,
|
|
and 124 more didn't build at all. It has 18374 builds left to complete.
|
|
Buildman expects to complete the process in around an hour and a quarter.
|
|
Use this time to buy a faster computer.
|
|
|
|
|
|
To find out how the build went, ask for a summary with -s. You can do this
|
|
either before the build completes (presumably in another terminal) or
|
|
afterwards. Let's work through an example of how this is used:
|
|
|
|
$ ./tools/buildman/buildman -b lcd9b -s
|
|
...
|
|
01: Merge branch 'master' of git://git.denx.de/u-boot-arm
|
|
powerpc: + galaxy5200_LOWBOOT
|
|
02: tegra: Use const for pinmux_config_pingroup/table()
|
|
03: tegra: Add display support to funcmux
|
|
04: tegra: fdt: Add pwm binding and node
|
|
05: tegra: fdt: Add LCD definitions for Tegra
|
|
06: tegra: Add support for PWM
|
|
07: tegra: Add SOC support for display/lcd
|
|
08: tegra: Add LCD driver
|
|
09: tegra: Add LCD support to Nvidia boards
|
|
10: arm: Add control over cachability of memory regions
|
|
11: lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
|
|
12: lcd: Add support for flushing LCD fb from dcache after update
|
|
arm: + lubbock
|
|
13: tegra: Align LCD frame buffer to section boundary
|
|
14: tegra: Support control of cache settings for LCD
|
|
15: tegra: fdt: Add LCD definitions for Seaboard
|
|
16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
|
|
17: tegra: Enable display/lcd support on Seaboard
|
|
18: wip
|
|
|
|
This shows which commits have succeeded and which have failed. In this case
|
|
the build is still in progress so many boards are not built yet (use -u to
|
|
see which ones). But already we can see a few failures. The galaxy5200_LOWBOOT
|
|
never builds correctly. This could be a problem with our toolchain, or it
|
|
could be a bug in the upstream. The good news is that we probably don't need
|
|
to blame our commits. The bad news is that our commits are not tested on that
|
|
board.
|
|
|
|
Commit 12 broke lubbock. That's what the '+ lubbock', in red, means. The
|
|
failure is never fixed by a later commit, or you would see lubbock again, in
|
|
green, without the +.
|
|
|
|
To see the actual error:
|
|
|
|
$ ./tools/buildman/buildman -b <branch> -se
|
|
...
|
|
12: lcd: Add support for flushing LCD fb from dcache after update
|
|
arm: + lubbock
|
|
+common/libcommon.o: In function `lcd_sync':
|
|
+common/lcd.c:120: undefined reference to `flush_dcache_range'
|
|
+arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2010q1-202) 2.19.51.20090709 assertion fail /scratch/julian/2010q1-release-linux-lite/obj/binutils-src-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12572
|
|
+make: *** [build/u-boot] Error 139
|
|
13: tegra: Align LCD frame buffer to section boundary
|
|
14: tegra: Support control of cache settings for LCD
|
|
15: tegra: fdt: Add LCD definitions for Seaboard
|
|
16: lcd: Add CONFIG_CONSOLE_SCROLL_LINES option to speed console
|
|
-common/lcd.c:120: undefined reference to `flush_dcache_range'
|
|
+common/lcd.c:125: undefined reference to `flush_dcache_range'
|
|
17: tegra: Enable display/lcd support on Seaboard
|
|
18: wip
|
|
|
|
So the problem is in lcd.c, due to missing cache operations. This information
|
|
should be enough to work out what that commit is doing to break these
|
|
boards. (In this case pxa did not have cache operations defined).
|
|
|
|
Note that if there were other boards with errors, the above command would
|
|
show their errors also. Each line is shown only once. So if lubbock and snow
|
|
produce the same error, we just see:
|
|
|
|
12: lcd: Add support for flushing LCD fb from dcache after update
|
|
arm: + lubbock snow
|
|
+common/libcommon.o: In function `lcd_sync':
|
|
+common/lcd.c:120: undefined reference to `flush_dcache_range'
|
|
+arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2010q1-202) 2.19.51.20090709 assertion fail /scratch/julian/2010q1-release-linux-lite/obj/binutils-src-2010q1-202-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12572
|
|
+make: *** [build/u-boot] Error 139
|
|
|
|
But if you did want to see just the errors for lubbock, use:
|
|
|
|
$ ./tools/buildman/buildman -b <branch> -se lubbock
|
|
|
|
If you see error lines marked with '-', that means that the errors were fixed
|
|
by that commit. Sometimes commits can be in the wrong order, so that a
|
|
breakage is introduced for a few commits and fixed by later commits. This
|
|
shows up clearly with buildman. You can then reorder the commits and try
|
|
again.
|
|
|
|
At commit 16, the error moves: you can see that the old error at line 120
|
|
is fixed, but there is a new one at line 126. This is probably only because
|
|
we added some code and moved the broken line further down the file.
|
|
|
|
As mentioned, if many boards have the same error, then -e will display the
|
|
error only once. This makes the output as concise as possible. To see which
|
|
boards have each error, use -l. So it is safe to omit the board name - you
|
|
will not get lots of repeated output for every board.
|
|
|
|
Buildman tries to distinguish warnings from errors, and shows warning lines
|
|
separately with a 'w' prefix. Warnings introduced show as yellow. Warnings
|
|
fixed show as cyan.
|
|
|
|
The full build output in this case is available in:
|
|
|
|
../lcd9b/12_of_18_gd92aff7_lcd--Add-support-for/lubbock/
|
|
|
|
done: Indicates the build was done, and holds the return code from make.
|
|
This is 0 for a good build, typically 2 for a failure.
|
|
|
|
err: Output from stderr, if any. Errors and warnings appear here.
|
|
|
|
log: Output from stdout. Normally there isn't any since buildman runs
|
|
in silent mode. Use -V to force a verbose build (this passes V=1
|
|
to 'make')
|
|
|
|
toolchain: Shows information about the toolchain used for the build.
|
|
|
|
sizes: Shows image size information.
|
|
|
|
It is possible to get the build binary output there also. Use the -k option
|
|
for this. In that case you will also see some output files, like:
|
|
|
|
System.map toolchain u-boot u-boot.bin u-boot.map autoconf.mk
|
|
(also SPL versions u-boot-spl and u-boot-spl.bin if available)
|
|
|
|
|
|
Checking Image Sizes
|
|
====================
|
|
|
|
A key requirement for U-Boot is that you keep code/data size to a minimum.
|
|
Where a new feature increases this noticeably it should normally be put
|
|
behind a CONFIG flag so that boards can leave it disabled and keep the image
|
|
size more or less the same with each new release.
|
|
|
|
To check the impact of your commits on image size, use -S. For example:
|
|
|
|
$ ./tools/buildman/buildman -b us-x86 -sS
|
|
Summary of 10 commits for 1066 boards (4 threads, 1 job per thread)
|
|
01: MAKEALL: add support for per architecture toolchains
|
|
02: x86: Add function to get top of usable ram
|
|
x86: (for 1/3 boards) text -272.0 rodata +41.0
|
|
03: x86: Add basic cache operations
|
|
04: x86: Permit bootstage and timer data to be used prior to relocation
|
|
x86: (for 1/3 boards) data +16.0
|
|
05: x86: Add an __end symbol to signal the end of the U-Boot binary
|
|
x86: (for 1/3 boards) text +76.0
|
|
06: x86: Rearrange the output input to remove BSS
|
|
x86: (for 1/3 boards) bss -2140.0
|
|
07: x86: Support relocation of FDT on start-up
|
|
x86: + coreboot-x86
|
|
08: x86: Add error checking to x86 relocation code
|
|
09: x86: Adjust link device tree include file
|
|
10: x86: Enable CONFIG_OF_CONTROL on coreboot
|
|
|
|
|
|
You can see that image size only changed on x86, which is good because this
|
|
series is not supposed to change any other board. From commit 7 onwards the
|
|
build fails so we don't get code size numbers. The numbers are fractional
|
|
because they are an average of all boards for that architecture. The
|
|
intention is to allow you to quickly find image size problems introduced by
|
|
your commits.
|
|
|
|
Note that the 'text' region and 'rodata' are split out. You should add the
|
|
two together to get the total read-only size (reported as the first column
|
|
in the output from binutil's 'size' utility).
|
|
|
|
A useful option is --step which lets you skip some commits. For example
|
|
--step 2 will show the image sizes for only every 2nd commit (so it will
|
|
compare the image sizes of the 1st, 3rd, 5th... commits). You can also use
|
|
--step 0 which will compare only the first and last commits. This is useful
|
|
for an overview of how your entire series affects code size. It will build
|
|
only the upstream commit and your final branch commit.
|
|
|
|
You can also use -d to see a detailed size breakdown for each board. This
|
|
list is sorted in order from largest growth to largest reduction.
|
|
|
|
It is even possible to go a little further with the -B option (--bloat). This
|
|
shows where U-Boot has bloated, breaking the size change down to the function
|
|
level. Example output is below:
|
|
|
|
$ ./tools/buildman/buildman -b us-mem4 -sSdB
|
|
...
|
|
19: Roll crc32 into hash infrastructure
|
|
arm: (for 10/10 boards) all -143.4 bss +1.2 data -4.8 rodata -48.2 text -91.6
|
|
paz00 : all +23 bss -4 rodata -29 text +56
|
|
u-boot: add: 1/0, grow: 3/-2 bytes: 168/-104 (64)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
ext4fs_read_file 540 568 +28
|
|
insert_var_value_sub 688 692 +4
|
|
run_list_real 1996 1992 -4
|
|
do_mem_crc 168 68 -100
|
|
trimslice : all -9 bss +16 rodata -29 text +4
|
|
u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
ext4fs_iterate_dir 672 668 -4
|
|
ext4fs_read_file 568 548 -20
|
|
do_mem_crc 168 68 -100
|
|
whistler : all -9 bss +16 rodata -29 text +4
|
|
u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
ext4fs_iterate_dir 672 668 -4
|
|
ext4fs_read_file 568 548 -20
|
|
do_mem_crc 168 68 -100
|
|
seaboard : all -9 bss -28 rodata -29 text +48
|
|
u-boot: add: 1/0, grow: 3/-2 bytes: 160/-104 (56)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
ext4fs_read_file 548 568 +20
|
|
run_list_real 1996 2000 +4
|
|
do_nandboot 760 756 -4
|
|
do_mem_crc 168 68 -100
|
|
colibri_t20 : all -9 rodata -29 text +20
|
|
u-boot: add: 1/0, grow: 2/-3 bytes: 140/-112 (28)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
read_abs_bbt 204 208 +4
|
|
do_nandboot 760 756 -4
|
|
ext4fs_read_file 576 568 -8
|
|
do_mem_crc 168 68 -100
|
|
ventana : all -37 bss -12 rodata -29 text +4
|
|
u-boot: add: 1/0, grow: 1/-3 bytes: 136/-124 (12)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
ext4fs_iterate_dir 672 668 -4
|
|
ext4fs_read_file 568 548 -20
|
|
do_mem_crc 168 68 -100
|
|
harmony : all -37 bss -16 rodata -29 text +8
|
|
u-boot: add: 1/0, grow: 2/-3 bytes: 140/-124 (16)
|
|
function old new delta
|
|
hash_command 80 160 +80
|
|
crc32_wd_buf - 56 +56
|
|
nand_write_oob_syndrome 428 432 +4
|
|
ext4fs_iterate_dir 672 668 -4
|
|
ext4fs_read_file 568 548 -20
|
|
do_mem_crc 168 68 -100
|
|
medcom-wide : all -417 bss +28 data -16 rodata -93 text -336
|
|
u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
|
|
function old new delta
|
|
crc32_wd_buf - 56 +56
|
|
do_fat_read_at 2872 2904 +32
|
|
hash_algo 16 - -16
|
|
do_mem_crc 168 68 -100
|
|
hash_command 420 160 -260
|
|
tec : all -449 bss -4 data -16 rodata -93 text -336
|
|
u-boot: add: 1/-1, grow: 1/-2 bytes: 88/-376 (-288)
|
|
function old new delta
|
|
crc32_wd_buf - 56 +56
|
|
do_fat_read_at 2872 2904 +32
|
|
hash_algo 16 - -16
|
|
do_mem_crc 168 68 -100
|
|
hash_command 420 160 -260
|
|
plutux : all -481 bss +16 data -16 rodata -93 text -388
|
|
u-boot: add: 1/-1, grow: 1/-3 bytes: 68/-408 (-340)
|
|
function old new delta
|
|
crc32_wd_buf - 56 +56
|
|
do_load_serial_bin 1688 1700 +12
|
|
hash_algo 16 - -16
|
|
do_fat_read_at 2904 2872 -32
|
|
do_mem_crc 168 68 -100
|
|
hash_command 420 160 -260
|
|
powerpc: (for 5/5 boards) all +37.4 data -3.2 rodata -41.8 text +82.4
|
|
MPC8610HPCD : all +55 rodata -29 text +84
|
|
u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
|
|
function old new delta
|
|
hash_command - 176 +176
|
|
do_mem_crc 184 88 -96
|
|
MPC8641HPCN : all +55 rodata -29 text +84
|
|
u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
|
|
function old new delta
|
|
hash_command - 176 +176
|
|
do_mem_crc 184 88 -96
|
|
MPC8641HPCN_36BIT: all +55 rodata -29 text +84
|
|
u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
|
|
function old new delta
|
|
hash_command - 176 +176
|
|
do_mem_crc 184 88 -96
|
|
sbc8641d : all +55 rodata -29 text +84
|
|
u-boot: add: 1/0, grow: 0/-1 bytes: 176/-96 (80)
|
|
function old new delta
|
|
hash_command - 176 +176
|
|
do_mem_crc 184 88 -96
|
|
xpedite517x : all -33 data -16 rodata -93 text +76
|
|
u-boot: add: 1/-1, grow: 0/-1 bytes: 176/-112 (64)
|
|
function old new delta
|
|
hash_command - 176 +176
|
|
hash_algo 16 - -16
|
|
do_mem_crc 184 88 -96
|
|
...
|
|
|
|
|
|
This shows that commit 19 has reduced codesize for arm slightly and increased
|
|
it for powerpc. This increase was offset in by reductions in rodata and
|
|
data/bss.
|
|
|
|
Shown below the summary lines are the sizes for each board. Below each board
|
|
are the sizes for each function. This information starts with:
|
|
|
|
add - number of functions added / removed
|
|
grow - number of functions which grew / shrunk
|
|
bytes - number of bytes of code added to / removed from all functions,
|
|
plus the total byte change in brackets
|
|
|
|
The change seems to be that hash_command() has increased by more than the
|
|
do_mem_crc() function has decreased. The function sizes typically add up to
|
|
roughly the text area size, but note that every read-only section except
|
|
rodata is included in 'text', so the function total does not exactly
|
|
correspond.
|
|
|
|
It is common when refactoring code for the rodata to decrease as the text size
|
|
increases, and vice versa.
|
|
|
|
|
|
The .buildman file
|
|
==================
|
|
|
|
The .buildman file provides information about the available toolchains and
|
|
also allows build flags to be passed to 'make'. It consists of several
|
|
sections, with the section name in square brackets. Within each section are
|
|
a set of (tag, value) pairs.
|
|
|
|
'[toolchain]' section
|
|
|
|
This lists the available toolchains. The tag here doesn't matter, but
|
|
make sure it is unique. The value is the path to the toolchain. Buildman
|
|
will look in that path for a file ending in 'gcc'. It will then execute
|
|
it to check that it is a C compiler, passing only the --version flag to
|
|
it. If the return code is 0, buildman assumes that it is a valid C
|
|
compiler. It uses the first part of the name as the architecture and
|
|
strips off the last part when setting the CROSS_COMPILE environment
|
|
variable (parts are delimited with a hyphen).
|
|
|
|
For example powerpc-linux-gcc will be noted as a toolchain for 'powerpc'
|
|
and CROSS_COMPILE will be set to powerpc-linux- when using it.
|
|
|
|
'[toolchain-alias]' section
|
|
|
|
This converts toolchain architecture names to U-Boot names. For example,
|
|
if an x86 toolchains is called i386-linux-gcc it will not normally be
|
|
used for architecture 'x86'. Adding 'x86: i386 x86_64' to this section
|
|
will tell buildman that the i386 and x86_64 toolchains can be used for
|
|
the x86 architecture.
|
|
|
|
'[make-flags]' section
|
|
|
|
U-Boot's build system supports a few flags (such as BUILD_TAG) which
|
|
affect the build product. These flags can be specified in the buildman
|
|
settings file. They can also be useful when building U-Boot against other
|
|
open source software.
|
|
|
|
[make-flags]
|
|
at91-boards=ENABLE_AT91_TEST=1
|
|
snapper9260=${at91-boards} BUILD_TAG=442
|
|
snapper9g45=${at91-boards} BUILD_TAG=443
|
|
|
|
This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260
|
|
and 'make ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. A special
|
|
variable ${target} is available to access the target name (snapper9260
|
|
and snapper9g20 in this case). Variables are resolved recursively. Note
|
|
that variables can only contain the characters A-Z, a-z, 0-9, hyphen (-)
|
|
and underscore (_).
|
|
|
|
It is expected that any variables added are dealt with in U-Boot's
|
|
config.mk file and documented in the README.
|
|
|
|
Note that you can pass ad-hoc options to the build using environment
|
|
variables, for example:
|
|
|
|
SOME_OPTION=1234 ./tools/buildman/buildman my_board
|
|
|
|
|
|
Quick Sanity Check
|
|
==================
|
|
|
|
If you have made changes and want to do a quick sanity check of the
|
|
currently checked-out source, run buildman without the -b flag. This will
|
|
build the selected boards and display build status as it runs (i.e. -v is
|
|
enabled automatically). Use -e to see errors/warnings as well.
|
|
|
|
|
|
Building Ranges
|
|
===============
|
|
|
|
You can build a range of commits by specifying a range instead of a branch
|
|
when using the -b flag. For example:
|
|
|
|
upstream/master..us-buildman
|
|
|
|
will build commits in us-buildman that are not in upstream/master.
|
|
|
|
|
|
Building Faster
|
|
===============
|
|
|
|
By default, buildman doesn't execute 'make mrproper' prior to building the
|
|
first commit for each board. This reduces the amount of work 'make' does, and
|
|
hence speeds up the build. To force use of 'make mrproper', use -the -m flag.
|
|
This flag will slow down any buildman invocation, since it increases the amount
|
|
of work done on any build.
|
|
|
|
One possible application of buildman is as part of a continual edit, build,
|
|
edit, build, ... cycle; repeatedly applying buildman to the same change or
|
|
series of changes while making small incremental modifications to the source
|
|
each time. This provides quick feedback regarding the correctness of recent
|
|
modifications. In this scenario, buildman's default choice of build directory
|
|
causes more build work to be performed than strictly necessary.
|
|
|
|
By default, each buildman thread uses a single directory for all builds. When a
|
|
thread builds multiple boards, the configuration built in this directory will
|
|
cycle through various different configurations, one per board built by the
|
|
thread. Variations in the configuration will force a rebuild of affected source
|
|
files when a thread switches between boards. Ideally, such buildman-induced
|
|
rebuilds would not happen, thus allowing the build to operate as efficiently as
|
|
the build system and source changes allow. buildman's -P flag may be used to
|
|
enable this; -P causes each board to be built in a separate (board-specific)
|
|
directory, thus avoiding any buildman-induced configuration changes in any
|
|
build directory.
|
|
|
|
U-Boot's build system embeds information such as a build timestamp into the
|
|
final binary. This information varies each time U-Boot is built. This causes
|
|
various files to be rebuilt even if no source changes are made, which in turn
|
|
requires that the final U-Boot binary be re-linked. This unnecessary work can
|
|
be avoided by turning off the timestamp feature. This can be achieved by
|
|
setting the SOURCE_DATE_EPOCH environment variable to 0.
|
|
|
|
Combining all of these options together yields the command-line shown below.
|
|
This will provide the quickest possible feedback regarding the current content
|
|
of the source tree, thus allowing rapid tested evolution of the code.
|
|
|
|
SOURCE_DATE_EPOCH=0 ./tools/buildman/buildman -P tegra
|
|
|
|
|
|
Checking configuration
|
|
======================
|
|
|
|
A common requirement when converting CONFIG options to Kconfig is to check
|
|
that the effective configuration has not changed due to the conversion.
|
|
Buildman supports this with the -K option, used after a build. This shows
|
|
differences in effective configuration between one commit and the next.
|
|
|
|
For example:
|
|
|
|
$ buildman -b kc4 -sK
|
|
...
|
|
43: Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
|
|
arm:
|
|
+ u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
|
|
+ u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
|
|
+ all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
|
|
am335x_evm_usbspl :
|
|
+ u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
|
|
+ u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
|
|
+ all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
|
|
44: Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
|
|
...
|
|
|
|
This shows that commit 44 enabled three new options for the board
|
|
am335x_evm_usbspl which were not enabled in commit 43. There is also a
|
|
summary for 'arm' showing all the changes detected for that architecture.
|
|
In this case there is only one board with changes, so 'arm' output is the
|
|
same as 'am335x_evm_usbspl'/
|
|
|
|
The -K option uses the u-boot.cfg, spl/u-boot-spl.cfg and tpl/u-boot-tpl.cfg
|
|
files which are produced by a build. If all you want is to check the
|
|
configuration you can in fact avoid doing a full build, using -D. This tells
|
|
buildman to configuration U-Boot and create the .cfg files, but not actually
|
|
build the source. This is 5-10 times faster than doing a full build.
|
|
|
|
By default buildman considers the follow two configuration methods
|
|
equivalent:
|
|
|
|
#define CONFIG_SOME_OPTION
|
|
|
|
CONFIG_SOME_OPTION=y
|
|
|
|
The former would appear in a header filer and the latter in a defconfig
|
|
file. The achieve this, buildman considers 'y' to be '1' in configuration
|
|
variables. This avoids lots of useless output when converting a CONFIG
|
|
option to Kconfig. To disable this behaviour, use --squash-config-y.
|
|
|
|
|
|
Checking the environment
|
|
========================
|
|
|
|
When converting CONFIG options which manipulate the default environment,
|
|
a common requirement is to check that the default environment has not
|
|
changed due to the conversion. Buildman supports this with the -U option,
|
|
used after a build. This shows differences in the default environment
|
|
between one commit and the next.
|
|
|
|
For example:
|
|
|
|
$ buildman -b squash brppt1 -sU
|
|
boards.cfg is up to date. Nothing to do.
|
|
Summary of 2 commits for 3 boards (3 threads, 3 jobs per thread)
|
|
01: Migrate bootlimit to Kconfig
|
|
02: Squashed commit of the following:
|
|
c brppt1_mmc: altbootcmd=mmc dev 1; run mmcboot0; -> mmc dev 1; run mmcboot0
|
|
c brppt1_spi: altbootcmd=mmc dev 1; run mmcboot0; -> mmc dev 1; run mmcboot0
|
|
+ brppt1_nand: altbootcmd=run usbscript
|
|
- brppt1_nand: altbootcmd=run usbscript
|
|
(no errors to report)
|
|
|
|
This shows that commit 2 modified the value of 'altbootcmd' for 'brppt1_mmc'
|
|
and 'brppt1_spi', removing a trailing semicolon. 'brppt1_nand' gained an a
|
|
value for 'altbootcmd', but lost one for ' altbootcmd'.
|
|
|
|
The -U option uses the u-boot.env files which are produced by a build.
|
|
|
|
|
|
Building with clang
|
|
===================
|
|
|
|
To build with clang (sandbox only), use the -O option to override the
|
|
toolchain. For example:
|
|
|
|
buildman -O clang-7 --board sandbox
|
|
|
|
|
|
Doing a simple build
|
|
====================
|
|
|
|
In some cases you just want to build a single board and get the full output, use
|
|
the -w option, for example:
|
|
|
|
buildman -o /tmp/build --board sandbox -w
|
|
|
|
This will write the full build into /tmp/build including object files.
|
|
|
|
|
|
Other options
|
|
=============
|
|
|
|
Buildman has various other command-line options. Try --help to see them.
|
|
|
|
To find out what toolchain prefix buildman will use for a build, use the -A
|
|
option.
|
|
|
|
To request that compiler warnings be promoted to errors, use -E. This passes the
|
|
-Werror flag to the compiler. Note that the build can still produce warnings
|
|
with -E, e.g. the migration warnings:
|
|
|
|
===================== WARNING ======================
|
|
This board does not use CONFIG_DM_MMC. Please update
|
|
...
|
|
====================================================
|
|
|
|
When doing builds, Buildman's return code will reflect the overall result:
|
|
|
|
0 (success) No errors or warnings found
|
|
128 Errors found
|
|
129 Warnings found (only if no -W)
|
|
|
|
You can use -W to tell Buildman to return 0 (success) instead of 129 when
|
|
warnings are found. Note that it can be useful to combine -E and -W. This means
|
|
that all compiler warnings will produce failures (code 128) and all other
|
|
warnings will produce success (since 129 is changed to 0).
|
|
|
|
If there are both warnings and errors, errors win, so buildman returns 128.
|
|
|
|
|
|
How to change from MAKEALL
|
|
==========================
|
|
|
|
Buildman includes most of the features of MAKEALL and is generally faster
|
|
and easier to use. In particular it builds entire branches: if a particular
|
|
commit introduces an error in a particular board, buildman can easily show
|
|
you this, even if a later commit fixes that error.
|
|
|
|
The reasons to deprecate MAKEALL are:
|
|
- We don't want to maintain two build systems
|
|
- Buildman is typically faster
|
|
- Buildman has a lot more features
|
|
|
|
But still, many people will be sad to lose MAKEALL. If you are used to
|
|
MAKEALL, here are a few pointers.
|
|
|
|
First you need to set up your tool chains - see the 'Setting up' section
|
|
for details. Once you have your required toolchain(s) detected then you are
|
|
ready to go.
|
|
|
|
To build the current source tree, run buildman without a -b flag:
|
|
|
|
./tools/buildman/buildman <list of things to build>
|
|
|
|
This will build the current source tree for the given boards and display
|
|
the results and errors.
|
|
|
|
However buildman usually works on entire branches, and for that you must
|
|
specify a board flag:
|
|
|
|
./tools/buildman/buildman -b <branch_name> <list of things to build>
|
|
|
|
followed by (afterwards, or perhaps concurrently in another terminal):
|
|
|
|
./tools/buildman/buildman -b <branch_name> -s <list of things to build>
|
|
|
|
to see the results of the build. Rather than showing you all the output,
|
|
buildman just shows a summary, with red indicating that a commit introduced
|
|
an error and green indicating that a commit fixed an error. Use the -e
|
|
flag to see the full errors and -l to see which boards caused which errors.
|
|
|
|
If you really want to see build results as they happen, use -v when doing a
|
|
build (and -e to see the errors/warnings too).
|
|
|
|
You don't need to stick around on that branch while buildman is running. It
|
|
checks out its own copy of the source code, so you can change branches,
|
|
add commits, etc. without affecting the build in progress.
|
|
|
|
The <list of things to build> can include board names, architectures or the
|
|
like. There are no flags to disambiguate since ambiguities are rare. Using
|
|
the examples from MAKEALL:
|
|
|
|
Examples:
|
|
- build all Power Architecture boards:
|
|
MAKEALL -a powerpc
|
|
MAKEALL --arch powerpc
|
|
MAKEALL powerpc
|
|
** buildman -b <branch> powerpc
|
|
- build all PowerPC boards manufactured by vendor "esd":
|
|
MAKEALL -a powerpc -v esd
|
|
** buildman -b <branch> esd
|
|
- build all PowerPC boards manufactured either by "keymile" or "siemens":
|
|
MAKEALL -a powerpc -v keymile -v siemens
|
|
** buildman -b <branch> keymile siemens
|
|
- build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
|
|
MAKEALL -c mpc83xx -v freescale 4xx
|
|
** buildman -b <branch> mpc83xx freescale 4xx
|
|
|
|
Buildman automatically tries to use all the CPUs in your machine. If you
|
|
are building a lot of boards it will use one thread for every CPU core
|
|
it detects in your machine. This is like MAKEALL's BUILD_NBUILDS option.
|
|
You can use the -T flag to change the number of threads. If you are only
|
|
building a few boards, buildman will automatically run make with the -j
|
|
flag to increase the number of concurrent make tasks. It isn't normally
|
|
that helpful to fiddle with this option, but if you use the BUILD_NCPUS
|
|
option in MAKEALL then -j is the equivalent in buildman.
|
|
|
|
Buildman puts its output in ../<branch_name> by default but you can change
|
|
this with the -o option. Buildman normally does out-of-tree builds: use -i
|
|
to disable that if you really want to. But be careful that once you have
|
|
used -i you pollute buildman's copies of the source tree, and you will need
|
|
to remove the build directory (normally ../<branch_name>) to run buildman
|
|
in normal mode (without -i).
|
|
|
|
Buildman doesn't keep the output result normally, but use the -k option to
|
|
do this.
|
|
|
|
Please read 'Theory of Operation' a few times as it will make a lot of
|
|
things clearer.
|
|
|
|
Some options you might like are:
|
|
|
|
-B shows which functions are growing/shrinking in which commit - great
|
|
for finding code bloat.
|
|
-S shows image sizes for each commit (just an overall summary)
|
|
-u shows boards that you haven't built yet
|
|
--step 0 will build just the upstream commit and the last commit of your
|
|
branch. This is often a quick sanity check that your branch doesn't
|
|
break anything. But note this does not check bisectability!
|
|
|
|
|
|
TODO
|
|
====
|
|
|
|
This has mostly be written in my spare time as a response to my difficulties
|
|
in testing large series of patches. Apart from tidying up there is quite a
|
|
bit of scope for improvement. Things like better error diffs and easier
|
|
access to log files. Also it would be nice if buildman could 'hunt' for
|
|
problems, perhaps by building a few boards for each arch, or checking
|
|
commits for changed files and building only boards which use those files.
|
|
|
|
|
|
Credits
|
|
=======
|
|
|
|
Thanks to Grant Grundler <grundler@chromium.org> for his ideas for improving
|
|
the build speed by building all commits for a board instead of the other
|
|
way around.
|
|
|
|
|
|
Simon Glass
|
|
sjg@chromium.org
|
|
Halloween 2012
|
|
Updated 12-12-12
|
|
Updated 23-02-13
|