mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Prabhakar Kushwaha](/assets/img/avatar_default.png)
LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
826 lines
19 KiB
C
826 lines
19 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <hwconfig.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <fm_eth.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <fsl-mc/ldpaa_wriop.h>
|
|
|
|
#include "../common/qixis.h"
|
|
|
|
#include "ls2080aqds_qixis.h"
|
|
|
|
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
/* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
|
|
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
|
|
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
|
|
*/
|
|
|
|
/* Mapping of 16 SERDES lanes to LS2080A QDS board slots. A value of '0' here
|
|
* means that the mapping must be determined dynamically, or that the lane
|
|
* maps to something other than a board slot.
|
|
*/
|
|
|
|
static u8 lane_to_slot_fsm1[] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
static u8 lane_to_slot_fsm2[] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0
|
|
};
|
|
|
|
/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
|
|
* housed.
|
|
*/
|
|
|
|
static int xqsgii_riser_phy_addr[] = {
|
|
XQSGMII_CARD_PHY1_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT0_ADDR,
|
|
XQSGMII_CARD_PHY3_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY1_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY4_PORT2_ADDR,
|
|
XQSGMII_CARD_PHY2_PORT2_ADDR,
|
|
};
|
|
|
|
static int sgmii_riser_phy_addr[] = {
|
|
SGMII_CARD_PORT1_PHY_ADDR,
|
|
SGMII_CARD_PORT2_PHY_ADDR,
|
|
SGMII_CARD_PORT3_PHY_ADDR,
|
|
SGMII_CARD_PORT4_PHY_ADDR,
|
|
};
|
|
|
|
/* Slot2 does not have EMI connections */
|
|
#define EMI_NONE 0xFFFFFFFF
|
|
#define EMI1_SLOT1 0
|
|
#define EMI1_SLOT2 1
|
|
#define EMI1_SLOT3 2
|
|
#define EMI1_SLOT4 3
|
|
#define EMI1_SLOT5 4
|
|
#define EMI1_SLOT6 5
|
|
#define EMI2 6
|
|
#define SFP_TX 0
|
|
|
|
static const char * const mdio_names[] = {
|
|
"LS2080A_QDS_MDIO0",
|
|
"LS2080A_QDS_MDIO1",
|
|
"LS2080A_QDS_MDIO2",
|
|
"LS2080A_QDS_MDIO3",
|
|
"LS2080A_QDS_MDIO4",
|
|
"LS2080A_QDS_MDIO5",
|
|
DEFAULT_WRIOP_MDIO2_NAME,
|
|
};
|
|
|
|
struct ls2080a_qds_mdio {
|
|
u8 muxval;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
static void sgmii_configure_repeater(int serdes_port)
|
|
{
|
|
struct mii_dev *bus;
|
|
uint8_t a = 0xf;
|
|
int i, j, ret;
|
|
int dpmac_id = 0, dpmac, mii_bus = 0;
|
|
unsigned short value;
|
|
char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"};
|
|
uint8_t i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5f, 0x60};
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
int *riser_phy_addr = &xqsgii_riser_phy_addr[0];
|
|
|
|
/* Set I2c to Slot 1 */
|
|
i2c_write(0x77, 0, 0, &a, 1);
|
|
|
|
for (dpmac = 0; dpmac < 8; dpmac++) {
|
|
/* Check the PHY status */
|
|
switch (serdes_port) {
|
|
case 1:
|
|
mii_bus = 0;
|
|
dpmac_id = dpmac + 1;
|
|
break;
|
|
case 2:
|
|
mii_bus = 1;
|
|
dpmac_id = dpmac + 9;
|
|
a = 0xb;
|
|
i2c_write(0x76, 0, 0, &a, 1);
|
|
break;
|
|
}
|
|
|
|
ret = miiphy_set_current_dev(dev[mii_bus]);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
bus = mdio_get_current_dev();
|
|
debug("Reading from bus %s\n", bus->name);
|
|
|
|
ret = miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f,
|
|
3);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
ret = miiphy_read(dev[mii_bus], riser_phy_addr[dpmac], 0x11,
|
|
&value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(10);
|
|
|
|
if ((value & 0xfff) == 0x40f) {
|
|
printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id);
|
|
continue;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
a = 0x18;
|
|
i2c_write(i2c_addr[dpmac], 6, 1, &a, 1);
|
|
a = 0x38;
|
|
i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
|
|
a = 0x4;
|
|
i2c_write(i2c_addr[dpmac], 8, 1, &a, 1);
|
|
|
|
i2c_write(i2c_addr[dpmac], 0xf, 1,
|
|
&ch_a_eq[i], 1);
|
|
i2c_write(i2c_addr[dpmac], 0x11, 1,
|
|
&ch_a_ctl2[j], 1);
|
|
|
|
i2c_write(i2c_addr[dpmac], 0x16, 1,
|
|
&ch_b_eq[i], 1);
|
|
i2c_write(i2c_addr[dpmac], 0x18, 1,
|
|
&ch_b_ctl2[j], 1);
|
|
|
|
a = 0x14;
|
|
i2c_write(i2c_addr[dpmac], 0x23, 1, &a, 1);
|
|
a = 0xb5;
|
|
i2c_write(i2c_addr[dpmac], 0x2d, 1, &a, 1);
|
|
a = 0x20;
|
|
i2c_write(i2c_addr[dpmac], 4, 1, &a, 1);
|
|
mdelay(100);
|
|
ret = miiphy_read(dev[mii_bus],
|
|
riser_phy_addr[dpmac],
|
|
0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
|
|
mdelay(1);
|
|
ret = miiphy_read(dev[mii_bus],
|
|
riser_phy_addr[dpmac],
|
|
0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(10);
|
|
|
|
if ((value & 0xfff) == 0x40f) {
|
|
printf("DPMAC %d :PHY is configured ",
|
|
dpmac_id);
|
|
printf("after setting repeater 0x%x\n",
|
|
value);
|
|
i = 5;
|
|
j = 5;
|
|
} else
|
|
printf("DPMAC %d :PHY is failed to ",
|
|
dpmac_id);
|
|
printf("configure the repeater 0x%x\n",
|
|
value);
|
|
}
|
|
}
|
|
}
|
|
error:
|
|
if (ret)
|
|
printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac_id);
|
|
return;
|
|
}
|
|
|
|
static void qsgmii_configure_repeater(int dpmac)
|
|
{
|
|
uint8_t a = 0xf;
|
|
int i, j;
|
|
int i2c_phy_addr = 0;
|
|
int phy_addr = 0;
|
|
int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
|
|
|
|
uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
|
|
uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
|
|
|
|
const char *dev = "LS2080A_QDS_MDIO0";
|
|
int ret = 0;
|
|
unsigned short value;
|
|
|
|
/* Set I2c to Slot 1 */
|
|
i2c_write(0x77, 0, 0, &a, 1);
|
|
|
|
switch (dpmac) {
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
i2c_phy_addr = i2c_addr[0];
|
|
phy_addr = 0;
|
|
break;
|
|
|
|
case 5:
|
|
case 6:
|
|
case 7:
|
|
case 8:
|
|
i2c_phy_addr = i2c_addr[1];
|
|
phy_addr = 4;
|
|
break;
|
|
|
|
case 9:
|
|
case 10:
|
|
case 11:
|
|
case 12:
|
|
i2c_phy_addr = i2c_addr[2];
|
|
phy_addr = 8;
|
|
break;
|
|
|
|
case 13:
|
|
case 14:
|
|
case 15:
|
|
case 16:
|
|
i2c_phy_addr = i2c_addr[3];
|
|
phy_addr = 0xc;
|
|
break;
|
|
}
|
|
|
|
/* Check the PHY status */
|
|
ret = miiphy_set_current_dev(dev);
|
|
ret = miiphy_write(dev, phy_addr, 0x1f, 3);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
for (j = 0; j < 4; j++) {
|
|
a = 0x18;
|
|
i2c_write(i2c_phy_addr, 6, 1, &a, 1);
|
|
a = 0x38;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
a = 0x4;
|
|
i2c_write(i2c_phy_addr, 8, 1, &a, 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1);
|
|
|
|
i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1);
|
|
i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1);
|
|
|
|
a = 0x14;
|
|
i2c_write(i2c_phy_addr, 0x23, 1, &a, 1);
|
|
a = 0xb5;
|
|
i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1);
|
|
a = 0x20;
|
|
i2c_write(i2c_phy_addr, 4, 1, &a, 1);
|
|
mdelay(100);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(1);
|
|
ret = miiphy_read(dev, phy_addr, 0x11, &value);
|
|
if (ret > 0)
|
|
goto error;
|
|
mdelay(10);
|
|
if ((value & 0xf) == 0xf) {
|
|
printf("DPMAC %d :PHY is ..... Configured\n",
|
|
dpmac);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
error:
|
|
printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
|
|
return;
|
|
}
|
|
|
|
static const char *ls2080a_qds_mdio_name_for_muxval(u8 muxval)
|
|
{
|
|
return mdio_names[muxval];
|
|
}
|
|
|
|
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
|
{
|
|
struct mii_dev *bus;
|
|
const char *name = ls2080a_qds_mdio_name_for_muxval(muxval);
|
|
|
|
if (!name) {
|
|
printf("No bus for muxval %x\n", muxval);
|
|
return NULL;
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name(name);
|
|
|
|
if (!bus) {
|
|
printf("No bus by name %s\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
static void ls2080a_qds_enable_SFP_TX(u8 muxval)
|
|
{
|
|
u8 brdcfg9;
|
|
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
|
|
brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
|
}
|
|
|
|
static void ls2080a_qds_mux_mdio(u8 muxval)
|
|
{
|
|
u8 brdcfg4;
|
|
|
|
if (muxval <= 5) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
|
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
|
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
|
}
|
|
}
|
|
|
|
static int ls2080a_qds_mdio_read(struct mii_dev *bus, int addr,
|
|
int devad, int regnum)
|
|
{
|
|
struct ls2080a_qds_mdio *priv = bus->priv;
|
|
|
|
ls2080a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int ls2080a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct ls2080a_qds_mdio *priv = bus->priv;
|
|
|
|
ls2080a_qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
|
}
|
|
|
|
static int ls2080a_qds_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct ls2080a_qds_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static int ls2080a_qds_mdio_init(char *realbusname, u8 muxval)
|
|
{
|
|
struct ls2080a_qds_mdio *pmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate ls2080a_qds MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
pmdio = malloc(sizeof(*pmdio));
|
|
if (!pmdio) {
|
|
printf("Failed to allocate ls2080a_qds private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = ls2080a_qds_mdio_read;
|
|
bus->write = ls2080a_qds_mdio_write;
|
|
bus->reset = ls2080a_qds_mdio_reset;
|
|
sprintf(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval));
|
|
|
|
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!pmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(pmdio);
|
|
return -1;
|
|
}
|
|
|
|
pmdio->muxval = muxval;
|
|
bus->priv = pmdio;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
/*
|
|
* Initialize the dpmac_info array.
|
|
*
|
|
*/
|
|
static void initialize_dpmac_to_slot(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
|
|
int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
|
|
|
|
char *env_hwconfig;
|
|
env_hwconfig = getenv("hwconfig");
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x07:
|
|
case 0x09:
|
|
case 0x33:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
lane_to_slot_fsm1[0] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[1] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[2] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[3] = EMI1_SLOT1;
|
|
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
|
lane_to_slot_fsm1[4] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[5] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[6] = EMI1_SLOT1;
|
|
lane_to_slot_fsm1[7] = EMI1_SLOT1;
|
|
} else {
|
|
lane_to_slot_fsm1[4] = EMI1_SLOT2;
|
|
lane_to_slot_fsm1[5] = EMI1_SLOT2;
|
|
lane_to_slot_fsm1[6] = EMI1_SLOT2;
|
|
lane_to_slot_fsm1[7] = EMI1_SLOT2;
|
|
}
|
|
break;
|
|
|
|
case 0x2A:
|
|
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__, serdes1_prtcl);
|
|
break;
|
|
}
|
|
|
|
switch (serdes2_prtcl) {
|
|
case 0x07:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x49:
|
|
printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
|
|
serdes2_prtcl);
|
|
lane_to_slot_fsm2[0] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[1] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[2] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[3] = EMI1_SLOT4;
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
|
lane_to_slot_fsm2[4] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[5] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[6] = EMI1_SLOT4;
|
|
lane_to_slot_fsm2[7] = EMI1_SLOT4;
|
|
} else {
|
|
/* No MDIO physical connection */
|
|
lane_to_slot_fsm2[4] = EMI1_SLOT6;
|
|
lane_to_slot_fsm2[5] = EMI1_SLOT6;
|
|
lane_to_slot_fsm2[6] = EMI1_SLOT6;
|
|
lane_to_slot_fsm2[7] = EMI1_SLOT6;
|
|
}
|
|
break;
|
|
default:
|
|
printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
|
|
__func__ , serdes2_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls2080a_handle_phy_interface_sgmii(int dpmac_id)
|
|
{
|
|
int lane, slot;
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
|
|
int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
|
|
|
|
int *riser_phy_addr;
|
|
char *env_hwconfig = getenv("hwconfig");
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig))
|
|
riser_phy_addr = &xqsgii_riser_phy_addr[0];
|
|
else
|
|
riser_phy_addr = &sgmii_riser_phy_addr[0];
|
|
|
|
if (dpmac_id > WRIOP1_DPMAC9)
|
|
goto serdes2;
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x07:
|
|
|
|
lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id);
|
|
slot = lane_to_slot_fsm1[lane];
|
|
|
|
switch (++slot) {
|
|
case 1:
|
|
/* Slot housing a SGMII riser card? */
|
|
wriop_set_phy_address(dpmac_id,
|
|
riser_phy_addr[dpmac_id - 1]);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
dpmac_info[dpmac_id].phydev = phy_connect(
|
|
dpmac_info[dpmac_id].bus,
|
|
dpmac_info[dpmac_id].phy_addr,
|
|
NULL,
|
|
dpmac_info[dpmac_id].enet_if);
|
|
phy_config(dpmac_info[dpmac_id].phydev);
|
|
break;
|
|
case 2:
|
|
/* Slot housing a SGMII riser card? */
|
|
wriop_set_phy_address(dpmac_id,
|
|
riser_phy_addr[dpmac_id - 1]);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT2;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT2);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
dpmac_info[dpmac_id].phydev = phy_connect(
|
|
dpmac_info[dpmac_id].bus,
|
|
dpmac_info[dpmac_id].phy_addr,
|
|
NULL,
|
|
dpmac_info[dpmac_id].enet_if);
|
|
phy_config(dpmac_info[dpmac_id].phydev);
|
|
break;
|
|
case 3:
|
|
break;
|
|
case 4:
|
|
break;
|
|
case 5:
|
|
break;
|
|
case 6:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
|
|
__func__ , serdes1_prtcl);
|
|
break;
|
|
}
|
|
|
|
serdes2:
|
|
switch (serdes2_prtcl) {
|
|
case 0x07:
|
|
case 0x08:
|
|
case 0x49:
|
|
lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
|
|
(dpmac_id - 9));
|
|
slot = lane_to_slot_fsm2[lane];
|
|
|
|
switch (++slot) {
|
|
case 1:
|
|
break;
|
|
case 3:
|
|
break;
|
|
case 4:
|
|
/* Slot housing a SGMII riser card? */
|
|
wriop_set_phy_address(dpmac_id,
|
|
riser_phy_addr[dpmac_id - 9]);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT4;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT4);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
dpmac_info[dpmac_id].phydev = phy_connect(
|
|
dpmac_info[dpmac_id].bus,
|
|
dpmac_info[dpmac_id].phy_addr,
|
|
NULL,
|
|
dpmac_info[dpmac_id].enet_if);
|
|
phy_config(dpmac_info[dpmac_id].phydev);
|
|
break;
|
|
case 5:
|
|
break;
|
|
case 6:
|
|
/* Slot housing a SGMII riser card? */
|
|
wriop_set_phy_address(dpmac_id,
|
|
riser_phy_addr[dpmac_id - 13]);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT6;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT6);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
printf("%s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
|
|
__func__, serdes2_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ls2080a_handle_phy_interface_qsgmii(int dpmac_id)
|
|
{
|
|
int lane = 0, slot;
|
|
struct mii_dev *bus;
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x33:
|
|
switch (dpmac_id) {
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_A);
|
|
break;
|
|
case 5:
|
|
case 6:
|
|
case 7:
|
|
case 8:
|
|
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_B);
|
|
break;
|
|
case 9:
|
|
case 10:
|
|
case 11:
|
|
case 12:
|
|
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_C);
|
|
break;
|
|
case 13:
|
|
case 14:
|
|
case 15:
|
|
case 16:
|
|
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_D);
|
|
break;
|
|
}
|
|
|
|
slot = lane_to_slot_fsm1[lane];
|
|
|
|
switch (++slot) {
|
|
case 1:
|
|
/* Slot housing a QSGMII riser card? */
|
|
wriop_set_phy_address(dpmac_id, dpmac_id - 1);
|
|
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
|
|
bus = mii_dev_for_muxval(EMI1_SLOT1);
|
|
wriop_set_mdio(dpmac_id, bus);
|
|
dpmac_info[dpmac_id].phydev = phy_connect(
|
|
dpmac_info[dpmac_id].bus,
|
|
dpmac_info[dpmac_id].phy_addr,
|
|
NULL,
|
|
dpmac_info[dpmac_id].enet_if);
|
|
|
|
phy_config(dpmac_info[dpmac_id].phydev);
|
|
break;
|
|
case 3:
|
|
break;
|
|
case 4:
|
|
break;
|
|
case 5:
|
|
break;
|
|
case 6:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
|
|
qsgmii_configure_repeater(dpmac_id);
|
|
}
|
|
|
|
void ls2080a_handle_phy_interface_xsgmii(int i)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x2A:
|
|
/*
|
|
* XFI does not need a PHY to work, but to avoid U-boot use
|
|
* default PHY address which is zero to a MAC when it found
|
|
* a MAC has no PHY address, we give a PHY address to XFI
|
|
* MAC, and should not use a real XAUI PHY address, since
|
|
* MDIO can access it successfully, and then MDIO thinks
|
|
* the XAUI card is used for the XFI MAC, which will cause
|
|
* error.
|
|
*/
|
|
wriop_set_phy_address(i, i + 4);
|
|
ls2080a_qds_enable_SFP_TX(SFP_TX);
|
|
|
|
break;
|
|
default:
|
|
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
|
|
serdes1_prtcl);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int error;
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
|
|
int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) &
|
|
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK)
|
|
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
|
|
|
|
struct memac_mdio_info *memac_mdio0_info;
|
|
struct memac_mdio_info *memac_mdio1_info;
|
|
unsigned int i;
|
|
char *env_hwconfig;
|
|
|
|
env_hwconfig = getenv("hwconfig");
|
|
|
|
initialize_dpmac_to_slot();
|
|
|
|
memac_mdio0_info = (struct memac_mdio_info *)malloc(
|
|
sizeof(struct memac_mdio_info));
|
|
memac_mdio0_info->regs =
|
|
(struct memac_mdio_controller *)
|
|
CONFIG_SYS_FSL_WRIOP1_MDIO1;
|
|
memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
|
|
|
|
/* Register the real MDIO1 bus */
|
|
fm_memac_mdio_init(bis, memac_mdio0_info);
|
|
|
|
memac_mdio1_info = (struct memac_mdio_info *)malloc(
|
|
sizeof(struct memac_mdio_info));
|
|
memac_mdio1_info->regs =
|
|
(struct memac_mdio_controller *)
|
|
CONFIG_SYS_FSL_WRIOP1_MDIO2;
|
|
memac_mdio1_info->name = DEFAULT_WRIOP_MDIO2_NAME;
|
|
|
|
/* Register the real MDIO2 bus */
|
|
fm_memac_mdio_init(bis, memac_mdio1_info);
|
|
|
|
/* Register the muxing front-ends to the MDIO buses */
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2);
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3);
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4);
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5);
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6);
|
|
|
|
ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2);
|
|
|
|
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
|
|
switch (wriop_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
ls2080a_handle_phy_interface_qsgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
ls2080a_handle_phy_interface_sgmii(i);
|
|
break;
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
ls2080a_handle_phy_interface_xsgmii(i);
|
|
break;
|
|
default:
|
|
break;
|
|
|
|
if (i == 16)
|
|
i = NUM_WRIOP_PORTS;
|
|
}
|
|
}
|
|
|
|
error = cpu_eth_init(bis);
|
|
|
|
if (hwconfig_f("xqsgmii", env_hwconfig)) {
|
|
if (serdes1_prtcl == 0x7)
|
|
sgmii_configure_repeater(1);
|
|
if (serdes2_prtcl == 0x7 || serdes2_prtcl == 0x8 ||
|
|
serdes2_prtcl == 0x49)
|
|
sgmii_configure_repeater(2);
|
|
}
|
|
#endif
|
|
error = pci_eth_init(bis);
|
|
return error;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_MC_ENET
|
|
|
|
#endif
|