brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-14 15:16:16 +09:00
Code Issues Projects Releases Wiki Activity
e895a4b06f
u-boot-brain/board/freescale/mpc5121ads/mpc5121ads.c
Simon Glass e895a4b06f fdt: Allow ft_board_setup() to report failure 
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00

285 lines
7.3 KiB
C
Raw Blame History

/*
* (C) Copyright 2007-2009 DENX Software Engineering
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/bitops.h>
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/mpc512x.h>
#include <fdt_support.h>
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
#include <net.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
DECLARE_GLOBAL_DATA_PTR;
void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
extern int mpc5121_nfc_chip;
/* Control chips select signal on MPC5121ADS board */
void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
{
unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09;
u8 v;
v = in_8(csreg);
v |= 0x0F;
if (chip >= 0) {
__mpc5121_nfc_select_chip(mtd, 0);
v &= ~(1 << mpc5121_nfc_chip);
} else {
__mpc5121_nfc_select_chip(mtd, -1);
}
out_8(csreg, v);
}
int board_early_init_f(void)
{
/*
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
*
* Without this the flash identification routine fails, as it needs to issue
* write commands in order to establish the device ID.
*/
#ifdef CONFIG_MPC5121ADS_REV2
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
#else
if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
} else {
/* running from Backup flash */
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
}
#endif
return 0;
}
int is_micron(void){
ushort brd_rev = *(vu_short *)(CONFIG_SYS_CPLD_BASE + 0x00);
uchar macaddr[6];
u32 brddate, macchk, ismicron;
/*
* MAC address has serial number with date of manufacture
* Boards made before Nov-08 #1180 use Micron memory;
* 001e59 is the STx vendor #
* Default is Elpida since it works for both but is slightly slower
*/
ismicron = 0;
if (brd_rev >= 0x0400 && eth_getenv_enetaddr("ethaddr", macaddr)) {
brddate = (macaddr[3] << 16) + (macaddr[4] << 8) + macaddr[5];
macchk = (macaddr[0] << 16) + (macaddr[1] << 8) + macaddr[2];
debug("brddate = %d\n\t", brddate);
if (macchk == 0x001e59 && brddate <= 8111180)
ismicron = 1;
} else if (brd_rev < 0x400) {
ismicron = 1;
}
debug("Using %s Memory settings\n\t",
ismicron ? "Micron" : "Elpida");
return(ismicron);
}
phys_size_t initdram(int board_type)
{
u32 msize = 0;
/*
* Elpida MDDRC and initialization settings are an alternative
* to the Default Micron ones for all but the earliest Rev 4 boards
*/
ddr512x_config_t elpida_mddrc_config = {
.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA,
.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA,
.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA,
};
u32 elpida_init_sequence[] = {
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_EM2,
CONFIG_SYS_DDRCMD_EM3,
CONFIG_SYS_DDRCMD_EN_DLL,
CONFIG_SYS_ELPIDA_RES_DLL,
CONFIG_SYS_DDRCMD_PCHG_ALL,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_DDRCMD_RFSH,
CONFIG_SYS_ELPIDA_INIT_DEV_OP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_OCD_DEFAULT,
CONFIG_SYS_ELPIDA_OCD_EXIT,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP,
CONFIG_SYS_DDRCMD_NOP
};
if (is_micron()) {
msize = fixed_sdram(NULL, NULL, 0);
} else {
msize = fixed_sdram(&elpida_mddrc_config,
elpida_init_sequence,
sizeof(elpida_init_sequence)/sizeof(u32));
}
return msize;
}
int misc_init_r(void)
{
u8 tmp_val;
/* Using this for DIU init before the driver in linux takes over
* Enable the TFP410 Encoder (I2C address 0x38)
*/
i2c_set_bus_num(2);
tmp_val = 0xBF;
i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
/* Verify if enabled */
tmp_val = 0;
i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
debug("DVI Encoder Read: 0x%02x\n", tmp_val);
tmp_val = 0x10;
i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
/* Verify if enabled */
tmp_val = 0;
i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
debug("DVI Encoder Read: 0x%02x\n", tmp_val);
return 0;
}
static iopin_t ioregs_init[] = {
/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* Set highest Slew on 9 PATA pins */
{
offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=SPDIF_TXCLK */
{
offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
{
offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=DIU CLK */
{
offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
},
/* FUNC2=DIU_HSYNC */
{
offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
{
offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
}
};
static iopin_t rev2_silicon_pci_ioregs_init[] = {
/* FUNC0=PCI Sets next 54 to PCI pads */
{
offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
}
};
int checkboard (void)
{
ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 spridr = in_be32(&im->sysconf.spridr);
printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
if (SVR_MJREV (spridr) >= 2)
iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
Reference in New Issue View Git Blame Copy Permalink