mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
158 lines
4.4 KiB
C
158 lines
4.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2013 Atmel Corporation.
|
|
* Josh Wu <josh.wu@atmel.com>
|
|
*
|
|
* Configuation settings for the AT91SAM9N12-EK boards.
|
|
*/
|
|
|
|
#ifndef __AT91SAM9N12_CONFIG_H_
|
|
#define __AT91SAM9N12_CONFIG_H_
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
|
|
|
|
/* Misc CPU related */
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* LCD */
|
|
#define LCD_BPP LCD_COLOR16
|
|
#define LCD_OUTPUT_BPP 24
|
|
#define CONFIG_LCD_LOGO
|
|
#define CONFIG_LCD_INFO
|
|
#define CONFIG_LCD_INFO_BELOW_LOGO
|
|
#define CONFIG_ATMEL_HLCD
|
|
#define CONFIG_ATMEL_LCD_RGB565
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
|
|
|
/*
|
|
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
|
* leaving the correct space for initial global data structure above
|
|
* that address while providing maximum stack area below.
|
|
*/
|
|
# define CONFIG_SYS_INIT_SP_ADDR \
|
|
(0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* DataFlash */
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4)
|
|
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5)
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=console=ttyS0,115200\0" \
|
|
"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
|
|
"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
|
|
"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_KS8851_MLL
|
|
#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x26e00000
|
|
|
|
/* USB host */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPI_BOOT
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
|
|
"sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
|
|
"bootm 0x22000000"
|
|
|
|
#elif defined(CONFIG_NAND_BOOT)
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
|
|
"nand read 0x21000000 0x180000 0x080000;" \
|
|
"nand read 0x22000000 0x200000 0x400000;" \
|
|
"bootm 0x22000000 - 0x21000000"
|
|
|
|
#else /* CONFIG_SD_BOOT */
|
|
|
|
/* bootstrap + u-boot + env + linux in mmc */
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_MMC
|
|
/* Use raw reserved sectors to save environment */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#else
|
|
/* Use file in FAT file to save environment */
|
|
#endif
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \
|
|
"fatload mmc 0:1 0x21000000 dtb;" \
|
|
"fatload mmc 0:1 0x22000000 uImage;" \
|
|
"bootm 0x22000000 - 0x21000000"
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
|
|
/* SPL */
|
|
#define CONFIG_SPL_MAX_SIZE 0x6000
|
|
#define CONFIG_SPL_STACK 0x308000
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
|
|
|
|
#define CONFIG_SYS_MASTER_CLOCK 132096000
|
|
#define CONFIG_SYS_AT91_PLLA 0x20953f03
|
|
#define CONFIG_SYS_MCKR 0x1301
|
|
#define CONFIG_SYS_MCKR_CSS 0x1302
|
|
|
|
#ifdef CONFIG_SD_BOOT
|
|
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
|
|
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
#elif CONFIG_NAND_BOOT
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#endif
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
|
|
|
|
#endif
|