mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 17:38:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
915 lines
22 KiB
C
915 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
* R. Chandrasekar <rcsekar@samsung.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <div64.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <i2s.h>
|
|
#include <sound.h>
|
|
#include <asm/arch/sound.h>
|
|
#include "wm8994.h"
|
|
#include "wm8994_registers.h"
|
|
|
|
/* defines for wm8994 system clock selection */
|
|
#define SEL_MCLK1 0x00
|
|
#define SEL_MCLK2 0x08
|
|
#define SEL_FLL1 0x10
|
|
#define SEL_FLL2 0x18
|
|
|
|
/* fll config to configure fll */
|
|
struct wm8994_fll_config {
|
|
int src; /* Source */
|
|
int in; /* Input frequency in Hz */
|
|
int out; /* output frequency in Hz */
|
|
};
|
|
|
|
/* codec private data */
|
|
struct wm8994_priv {
|
|
enum wm8994_type type; /* codec type of wolfson */
|
|
int revision; /* Revision */
|
|
int sysclk[WM8994_MAX_AIF]; /* System clock frequency in Hz */
|
|
int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */
|
|
int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */
|
|
struct wm8994_fll_config fll[2]; /* fll config to configure fll */
|
|
};
|
|
|
|
/* wm 8994 supported sampling rate values */
|
|
static unsigned int src_rate[] = {
|
|
8000, 11025, 12000, 16000, 22050, 24000,
|
|
32000, 44100, 48000, 88200, 96000
|
|
};
|
|
|
|
/* op clock divisions */
|
|
static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
|
|
|
|
/* lr clock frame size ratio */
|
|
static int fs_ratios[] = {
|
|
64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
|
|
};
|
|
|
|
/* bit clock divisors */
|
|
static int bclk_divs[] = {
|
|
10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
|
|
640, 880, 960, 1280, 1760, 1920
|
|
};
|
|
|
|
static struct wm8994_priv g_wm8994_info;
|
|
static unsigned char g_wm8994_i2c_dev_addr;
|
|
static struct sound_codec_info g_codec_info;
|
|
|
|
/*
|
|
* Initialise I2C for wm 8994
|
|
*
|
|
* @param bus no i2c bus number in which wm8994 is connected
|
|
*/
|
|
static void wm8994_i2c_init(int bus_no)
|
|
{
|
|
i2c_set_bus_num(bus_no);
|
|
}
|
|
|
|
/*
|
|
* Writes value to a device register through i2c
|
|
*
|
|
* @param reg reg number to be write
|
|
* @param data data to be writen to the above registor
|
|
*
|
|
* @return int value 1 for change, 0 for no change or negative error code.
|
|
*/
|
|
static int wm8994_i2c_write(unsigned int reg, unsigned short data)
|
|
{
|
|
unsigned char val[2];
|
|
|
|
val[0] = (unsigned char)((data >> 8) & 0xff);
|
|
val[1] = (unsigned char)(data & 0xff);
|
|
debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data);
|
|
|
|
return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
|
|
}
|
|
|
|
/*
|
|
* Read a value from a device register through i2c
|
|
*
|
|
* @param reg reg number to be read
|
|
* @param data address of read data to be stored
|
|
*
|
|
* @return int value 0 for success, -1 in case of error.
|
|
*/
|
|
static unsigned int wm8994_i2c_read(unsigned int reg , unsigned short *data)
|
|
{
|
|
unsigned char val[2];
|
|
int ret;
|
|
|
|
ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
|
|
if (ret != 0) {
|
|
debug("%s: Error while reading register %#04x\n",
|
|
__func__, reg);
|
|
return -1;
|
|
}
|
|
|
|
*data = val[0];
|
|
*data <<= 8;
|
|
*data |= val[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* update device register bits through i2c
|
|
*
|
|
* @param reg codec register
|
|
* @param mask register mask
|
|
* @param value new value
|
|
*
|
|
* @return int value 1 if change in the register value,
|
|
* 0 for no change or negative error code.
|
|
*/
|
|
static int wm8994_update_bits(unsigned int reg, unsigned short mask,
|
|
unsigned short value)
|
|
{
|
|
int change , ret = 0;
|
|
unsigned short old, new;
|
|
|
|
if (wm8994_i2c_read(reg, &old) != 0)
|
|
return -1;
|
|
new = (old & ~mask) | (value & mask);
|
|
change = (old != new) ? 1 : 0;
|
|
if (change)
|
|
ret = wm8994_i2c_write(reg, new);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return change;
|
|
}
|
|
|
|
/*
|
|
* Sets i2s set format
|
|
*
|
|
* @param aif_id Interface ID
|
|
* @param fmt i2S format
|
|
*
|
|
* @return -1 for error and 0 Success.
|
|
*/
|
|
int wm8994_set_fmt(int aif_id, unsigned int fmt)
|
|
{
|
|
int ms_reg;
|
|
int aif_reg;
|
|
int ms = 0;
|
|
int aif = 0;
|
|
int aif_clk = 0;
|
|
int error = 0;
|
|
|
|
switch (aif_id) {
|
|
case 1:
|
|
ms_reg = WM8994_AIF1_MASTER_SLAVE;
|
|
aif_reg = WM8994_AIF1_CONTROL_1;
|
|
aif_clk = WM8994_AIF1_CLOCKING_1;
|
|
break;
|
|
case 2:
|
|
ms_reg = WM8994_AIF2_MASTER_SLAVE;
|
|
aif_reg = WM8994_AIF2_CONTROL_1;
|
|
aif_clk = WM8994_AIF2_CLOCKING_1;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid audio interface selection\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
ms = WM8994_AIF1_MSTR;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid i2s master selection\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif |= WM8994_AIF1_LRCLK_INV;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif |= 0x18;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif |= 0x10;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aif |= 0x8;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid i2s format selection\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* frame inversion not valid for DSP modes */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif |= WM8994_AIF1_BCLK_INV;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid i2s frame inverse selection\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif |= WM8994_AIF1_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif |= WM8994_AIF1_LRCLK_INV;
|
|
break;
|
|
default:
|
|
debug("%s: Invalid i2s clock polarity selection\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
break;
|
|
default:
|
|
debug("%s: Invalid i2s format selection\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV |
|
|
WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif);
|
|
|
|
error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms);
|
|
error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK,
|
|
WM8994_AIF1CLK_ENA);
|
|
if (error < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Sets hw params FOR WM8994
|
|
*
|
|
* @param wm8994 wm8994 information pointer
|
|
* @param aif_id Audio interface ID
|
|
* @param sampling_rate Sampling rate
|
|
* @param bits_per_sample Bits per sample
|
|
* @param Channels Channels in the given audio input
|
|
*
|
|
* @return -1 for error and 0 Success.
|
|
*/
|
|
static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id,
|
|
unsigned int sampling_rate, unsigned int bits_per_sample,
|
|
unsigned int channels)
|
|
{
|
|
int aif1_reg;
|
|
int aif2_reg;
|
|
int bclk_reg;
|
|
int bclk = 0;
|
|
int rate_reg;
|
|
int aif1 = 0;
|
|
int aif2 = 0;
|
|
int rate_val = 0;
|
|
int id = aif_id - 1;
|
|
int i, cur_val, best_val, bclk_rate, best;
|
|
unsigned short reg_data;
|
|
int ret = 0;
|
|
|
|
switch (aif_id) {
|
|
case 1:
|
|
aif1_reg = WM8994_AIF1_CONTROL_1;
|
|
aif2_reg = WM8994_AIF1_CONTROL_2;
|
|
bclk_reg = WM8994_AIF1_BCLK;
|
|
rate_reg = WM8994_AIF1_RATE;
|
|
break;
|
|
case 2:
|
|
aif1_reg = WM8994_AIF2_CONTROL_1;
|
|
aif2_reg = WM8994_AIF2_CONTROL_2;
|
|
bclk_reg = WM8994_AIF2_BCLK;
|
|
rate_reg = WM8994_AIF2_RATE;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
bclk_rate = sampling_rate * 32;
|
|
switch (bits_per_sample) {
|
|
case 16:
|
|
bclk_rate *= 16;
|
|
break;
|
|
case 20:
|
|
bclk_rate *= 20;
|
|
aif1 |= 0x20;
|
|
break;
|
|
case 24:
|
|
bclk_rate *= 24;
|
|
aif1 |= 0x40;
|
|
break;
|
|
case 32:
|
|
bclk_rate *= 32;
|
|
aif1 |= 0x60;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
/* Try to find an appropriate sample rate; look for an exact match. */
|
|
for (i = 0; i < ARRAY_SIZE(src_rate); i++)
|
|
if (src_rate[i] == sampling_rate)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(src_rate)) {
|
|
debug("%s: Could not get the best matching samplingrate\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
|
|
rate_val |= i << WM8994_AIF1_SR_SHIFT;
|
|
|
|
/* AIFCLK/fs ratio; look for a close match in either direction */
|
|
best = 0;
|
|
best_val = abs((fs_ratios[0] * sampling_rate)
|
|
- wm8994->aifclk[id]);
|
|
|
|
for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
|
|
cur_val = abs((fs_ratios[i] * sampling_rate)
|
|
- wm8994->aifclk[id]);
|
|
if (cur_val >= best_val)
|
|
continue;
|
|
best = i;
|
|
best_val = cur_val;
|
|
}
|
|
|
|
rate_val |= best;
|
|
|
|
/*
|
|
* We may not get quite the right frequency if using
|
|
* approximate clocks so look for the closest match that is
|
|
* higher than the target (we need to ensure that there enough
|
|
* BCLKs to clock out the samples).
|
|
*/
|
|
best = 0;
|
|
for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
|
|
cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
|
|
if (cur_val < 0) /* BCLK table is sorted */
|
|
break;
|
|
best = i;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(bclk_divs)) {
|
|
debug("%s: Could not get the best matching bclk division\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
|
|
bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
|
|
bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
|
|
|
|
if (wm8994_i2c_read(aif1_reg, ®_data) != 0) {
|
|
debug("%s: AIF1 register read Failed\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
if ((channels == 1) && ((reg_data & 0x18) == 0x18))
|
|
aif2 |= WM8994_AIF1_MONO;
|
|
|
|
if (wm8994->aifclk[id] == 0) {
|
|
debug("%s:Audio interface clock not set\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1);
|
|
ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2);
|
|
ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
|
|
ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK |
|
|
WM8994_AIF1CLK_RATE_MASK, rate_val);
|
|
|
|
debug("rate vale = %x , bclk val= %x\n", rate_val, bclk);
|
|
|
|
if (ret < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures Audio interface Clock
|
|
*
|
|
* @param wm8994 wm8994 information pointer
|
|
* @param aif Audio Interface ID
|
|
*
|
|
* @return -1 for error and 0 Success.
|
|
*/
|
|
static int configure_aif_clock(struct wm8994_priv *wm8994, int aif)
|
|
{
|
|
int rate;
|
|
int reg1 = 0;
|
|
int offset;
|
|
int ret;
|
|
|
|
/* AIF(1/0) register adress offset calculated */
|
|
if (aif-1)
|
|
offset = 4;
|
|
else
|
|
offset = 0;
|
|
|
|
switch (wm8994->sysclk[aif-1]) {
|
|
case WM8994_SYSCLK_MCLK1:
|
|
reg1 |= SEL_MCLK1;
|
|
rate = wm8994->mclk[0];
|
|
break;
|
|
|
|
case WM8994_SYSCLK_MCLK2:
|
|
reg1 |= SEL_MCLK2;
|
|
rate = wm8994->mclk[1];
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL1:
|
|
reg1 |= SEL_FLL1;
|
|
rate = wm8994->fll[0].out;
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL2:
|
|
reg1 |= SEL_FLL2;
|
|
rate = wm8994->fll[1].out;
|
|
break;
|
|
|
|
default:
|
|
debug("%s: Invalid input clock selection [%d]\n",
|
|
__func__, wm8994->sysclk[aif-1]);
|
|
return -1;
|
|
}
|
|
|
|
/* if input clock frequenct is more than 135Mhz then divide */
|
|
if (rate >= WM8994_MAX_INPUT_CLK_FREQ) {
|
|
rate /= 2;
|
|
reg1 |= WM8994_AIF1CLK_DIV;
|
|
}
|
|
|
|
wm8994->aifclk[aif-1] = rate;
|
|
|
|
ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset,
|
|
WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
|
|
reg1);
|
|
|
|
if (aif == WM8994_AIF1)
|
|
ret |= wm8994_update_bits(WM8994_CLOCKING_1,
|
|
WM8994_AIF1DSPCLK_ENA_MASK | WM8994_SYSDSPCLK_ENA_MASK,
|
|
WM8994_AIF1DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
|
|
else if (aif == WM8994_AIF2)
|
|
ret |= wm8994_update_bits(WM8994_CLOCKING_1,
|
|
WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK |
|
|
WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC |
|
|
WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
|
|
|
|
if (ret < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configures Audio interface for the given frequency
|
|
*
|
|
* @param wm8994 wm8994 information
|
|
* @param aif_id Audio Interface
|
|
* @param clk_id Input Clock ID
|
|
* @param freq Sampling frequency in Hz
|
|
*
|
|
* @return -1 for error and 0 success.
|
|
*/
|
|
static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id,
|
|
int clk_id, unsigned int freq)
|
|
{
|
|
int i;
|
|
int ret = 0;
|
|
|
|
wm8994->sysclk[aif_id - 1] = clk_id;
|
|
|
|
switch (clk_id) {
|
|
case WM8994_SYSCLK_MCLK1:
|
|
wm8994->mclk[0] = freq;
|
|
if (aif_id == 2) {
|
|
ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 ,
|
|
WM8994_AIF2DAC_DIV_MASK , 0);
|
|
}
|
|
break;
|
|
|
|
case WM8994_SYSCLK_MCLK2:
|
|
/* TODO: Set GPIO AF */
|
|
wm8994->mclk[1] = freq;
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL1:
|
|
case WM8994_SYSCLK_FLL2:
|
|
break;
|
|
|
|
case WM8994_SYSCLK_OPCLK:
|
|
/*
|
|
* Special case - a division (times 10) is given and
|
|
* no effect on main clocking.
|
|
*/
|
|
if (freq) {
|
|
for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
|
|
if (opclk_divs[i] == freq)
|
|
break;
|
|
if (i == ARRAY_SIZE(opclk_divs)) {
|
|
debug("%s frequency divisor not found\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
ret = wm8994_update_bits(WM8994_CLOCKING_2,
|
|
WM8994_OPCLK_DIV_MASK, i);
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
|
|
WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
|
|
} else {
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
|
|
WM8994_OPCLK_ENA, 0);
|
|
}
|
|
|
|
default:
|
|
debug("%s Invalid input clock selection [%d]\n",
|
|
__func__, clk_id);
|
|
return -1;
|
|
}
|
|
|
|
ret |= configure_aif_clock(wm8994, aif_id);
|
|
|
|
if (ret < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initializes Volume for AIF2 to HP path
|
|
*
|
|
* @returns -1 for error and 0 Success.
|
|
*
|
|
*/
|
|
static int wm8994_init_volume_aif2_dac1(void)
|
|
{
|
|
int ret;
|
|
|
|
/* Unmute AIF2DAC */
|
|
ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1,
|
|
WM8994_AIF2DAC_MUTE_MASK, 0);
|
|
|
|
|
|
ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME,
|
|
WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK,
|
|
WM8994_AIF2DAC_VU | 0xff);
|
|
|
|
ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME,
|
|
WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK,
|
|
WM8994_AIF2DAC_VU | 0xff);
|
|
|
|
|
|
ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
|
|
WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
|
|
WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
|
|
|
|
ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
|
|
WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
|
|
WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
|
|
/* Head Phone Volume */
|
|
ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
|
|
ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
|
|
|
|
if (ret < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initializes Volume for AIF1 to HP path
|
|
*
|
|
* @returns -1 for error and 0 Success.
|
|
*
|
|
*/
|
|
static int wm8994_init_volume_aif1_dac1(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
/* Unmute AIF1DAC */
|
|
ret |= wm8994_i2c_write(WM8994_AIF1_DAC_FILTERS_1, 0x0000);
|
|
|
|
ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
|
|
WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
|
|
WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
|
|
|
|
ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
|
|
WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
|
|
WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
|
|
/* Head Phone Volume */
|
|
ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
|
|
ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
|
|
|
|
if (ret < 0) {
|
|
debug("%s: codec register access error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Intialise wm8994 codec device
|
|
*
|
|
* @param wm8994 wm8994 information
|
|
*
|
|
* @returns -1 for error and 0 Success.
|
|
*/
|
|
static int wm8994_device_init(struct wm8994_priv *wm8994,
|
|
enum en_audio_interface aif_id)
|
|
{
|
|
const char *devname;
|
|
unsigned short reg_data;
|
|
int ret;
|
|
|
|
wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */
|
|
|
|
ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, ®_data);
|
|
if (ret < 0) {
|
|
debug("Failed to read ID register\n");
|
|
goto err;
|
|
}
|
|
|
|
if (reg_data == WM8994_ID) {
|
|
devname = "WM8994";
|
|
debug("Device registered as type %d\n", wm8994->type);
|
|
wm8994->type = WM8994;
|
|
} else {
|
|
debug("Device is not a WM8994, ID is %x\n", ret);
|
|
ret = -1;
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8994_i2c_read(WM8994_CHIP_REVISION, ®_data);
|
|
if (ret < 0) {
|
|
debug("Failed to read revision register: %d\n", ret);
|
|
goto err;
|
|
}
|
|
wm8994->revision = reg_data;
|
|
debug("%s revision %c\n", devname, 'A' + wm8994->revision);
|
|
|
|
/* VMID Selection */
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3);
|
|
|
|
/* Charge Pump Enable */
|
|
ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK,
|
|
WM8994_CP_ENA);
|
|
|
|
/* Head Phone Power Enable */
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA);
|
|
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA);
|
|
|
|
if (aif_id == WM8994_AIF1) {
|
|
ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_2,
|
|
WM8994_TSHUT_ENA | WM8994_MIXINL_ENA |
|
|
WM8994_MIXINR_ENA | WM8994_IN2L_ENA |
|
|
WM8994_IN2R_ENA);
|
|
|
|
ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_4,
|
|
WM8994_ADCL_ENA | WM8994_ADCR_ENA |
|
|
WM8994_AIF1ADC1R_ENA |
|
|
WM8994_AIF1ADC1L_ENA);
|
|
|
|
/* Power enable for AIF1 and DAC1 */
|
|
ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_5,
|
|
WM8994_AIF1DACL_ENA |
|
|
WM8994_AIF1DACR_ENA |
|
|
WM8994_DAC1L_ENA | WM8994_DAC1R_ENA);
|
|
} else if (aif_id == WM8994_AIF2) {
|
|
/* Power enable for AIF2 and DAC1 */
|
|
ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5,
|
|
WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK |
|
|
WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK,
|
|
WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
|
|
WM8994_DAC1L_ENA | WM8994_DAC1R_ENA);
|
|
}
|
|
/* Head Phone Initialisation */
|
|
ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
|
|
WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK,
|
|
WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY);
|
|
|
|
ret |= wm8994_update_bits(WM8994_DC_SERVO_1,
|
|
WM8994_DCS_ENA_CHAN_0_MASK |
|
|
WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 |
|
|
WM8994_DCS_ENA_CHAN_1);
|
|
|
|
ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
|
|
WM8994_HPOUT1L_DLY_MASK |
|
|
WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK |
|
|
WM8994_HPOUT1R_OUTP_MASK |
|
|
WM8994_HPOUT1L_RMV_SHORT_MASK |
|
|
WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY |
|
|
WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP |
|
|
WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT |
|
|
WM8994_HPOUT1R_RMV_SHORT);
|
|
|
|
/* MIXER Config DAC1 to HP */
|
|
ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1,
|
|
WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L);
|
|
|
|
ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2,
|
|
WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R);
|
|
|
|
if (aif_id == WM8994_AIF1) {
|
|
/* Routing AIF1 to DAC1 */
|
|
ret |= wm8994_i2c_write(WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
WM8994_AIF1DAC1L_TO_DAC1L);
|
|
|
|
ret |= wm8994_i2c_write(WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
WM8994_AIF1DAC1R_TO_DAC1R);
|
|
|
|
/* GPIO Settings for AIF1 */
|
|
ret |= wm8994_i2c_write(WM8994_GPIO_1, WM8994_GPIO_DIR_OUTPUT
|
|
| WM8994_GPIO_FUNCTION_I2S_CLK
|
|
| WM8994_GPIO_INPUT_DEBOUNCE);
|
|
|
|
ret |= wm8994_init_volume_aif1_dac1();
|
|
} else if (aif_id == WM8994_AIF2) {
|
|
/* Routing AIF2 to DAC1 */
|
|
ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
WM8994_AIF2DACL_TO_DAC1L_MASK,
|
|
WM8994_AIF2DACL_TO_DAC1L);
|
|
|
|
ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
WM8994_AIF2DACR_TO_DAC1R_MASK,
|
|
WM8994_AIF2DACR_TO_DAC1R);
|
|
|
|
/* GPIO Settings for AIF2 */
|
|
/* B CLK */
|
|
ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK |
|
|
WM8994_GPIO_FUNCTION_MASK ,
|
|
WM8994_GPIO_DIR_OUTPUT);
|
|
|
|
/* LR CLK */
|
|
ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK |
|
|
WM8994_GPIO_FUNCTION_MASK,
|
|
WM8994_GPIO_DIR_OUTPUT);
|
|
|
|
/* DATA */
|
|
ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK |
|
|
WM8994_GPIO_FUNCTION_MASK,
|
|
WM8994_GPIO_DIR_OUTPUT);
|
|
|
|
ret |= wm8994_init_volume_aif2_dac1();
|
|
}
|
|
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
debug("%s: Codec chip init ok\n", __func__);
|
|
return 0;
|
|
err:
|
|
debug("%s: Codec chip init error\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Gets fdt values for wm8994 config parameters
|
|
*
|
|
* @param pcodec_info codec information structure
|
|
* @param blob FDT blob
|
|
* @return int value, 0 for success
|
|
*/
|
|
static int get_codec_values(struct sound_codec_info *pcodec_info,
|
|
const void *blob)
|
|
{
|
|
int error = 0;
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
enum fdt_compat_id compat;
|
|
int node;
|
|
int parent;
|
|
|
|
/* Get the node from FDT for codec */
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC);
|
|
if (node <= 0) {
|
|
debug("EXYNOS_SOUND: No node for codec in device tree\n");
|
|
debug("node = %d\n", node);
|
|
return -1;
|
|
}
|
|
|
|
parent = fdt_parent_offset(blob, node);
|
|
if (parent < 0) {
|
|
debug("%s: Cannot find node parent\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
compat = fdtdec_lookup(blob, parent);
|
|
switch (compat) {
|
|
case COMPAT_SAMSUNG_S3C2440_I2C:
|
|
pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
|
|
error |= pcodec_info->i2c_bus;
|
|
debug("i2c bus = %d\n", pcodec_info->i2c_bus);
|
|
pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
|
|
"reg", 0);
|
|
error |= pcodec_info->i2c_dev_addr;
|
|
debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
|
|
break;
|
|
default:
|
|
debug("%s: Unknown compat id %d\n", __func__, compat);
|
|
return -1;
|
|
}
|
|
#else
|
|
pcodec_info->i2c_bus = AUDIO_I2C_BUS;
|
|
pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
|
|
debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
|
|
#endif
|
|
|
|
pcodec_info->codec_type = CODEC_WM_8994;
|
|
|
|
if (error == -1) {
|
|
debug("fail to get wm8994 codec node properties\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* WM8994 Device Initialisation */
|
|
int wm8994_init(const void *blob, enum en_audio_interface aif_id,
|
|
int sampling_rate, int mclk_freq,
|
|
int bits_per_sample, unsigned int channels)
|
|
{
|
|
int ret = 0;
|
|
struct sound_codec_info *pcodec_info = &g_codec_info;
|
|
|
|
/* Get the codec Values */
|
|
if (get_codec_values(pcodec_info, blob) < 0) {
|
|
debug("FDT Codec values failed\n");
|
|
return -1;
|
|
}
|
|
|
|
/* shift the device address by 1 for 7 bit addressing */
|
|
g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
|
|
wm8994_i2c_init(pcodec_info->i2c_bus);
|
|
|
|
if (pcodec_info->codec_type == CODEC_WM_8994) {
|
|
g_wm8994_info.type = WM8994;
|
|
} else {
|
|
debug("%s: Codec id [%d] not defined\n", __func__,
|
|
pcodec_info->codec_type);
|
|
return -1;
|
|
}
|
|
|
|
ret = wm8994_device_init(&g_wm8994_info, aif_id);
|
|
if (ret < 0) {
|
|
debug("%s: wm8994 codec chip init failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1,
|
|
mclk_freq);
|
|
if (ret < 0) {
|
|
debug("%s: wm8994 codec set sys clock failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate,
|
|
bits_per_sample, channels);
|
|
|
|
if (ret == 0) {
|
|
ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF |
|
|
SND_SOC_DAIFMT_CBS_CFS);
|
|
}
|
|
return ret;
|
|
}
|