mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Bin Meng](/assets/img/avatar_default.png)
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
210 lines
4.6 KiB
C
210 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Support for Serial I/O using STMicroelectronics' on-chip ASC.
|
|
*
|
|
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
|
|
* Author(s): Patrice Chotard, <patrice.chotard@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <serial.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define BAUDMODE 0x00001000
|
|
#define RXENABLE 0x00000100
|
|
#define RUN 0x00000080
|
|
#define MODE 0x00000001
|
|
#define MODE_8BIT 0x0001
|
|
#define STOP_1BIT 0x0008
|
|
#define PARITYODD 0x0020
|
|
|
|
#define STA_TF BIT(9)
|
|
#define STA_RBF BIT(0)
|
|
|
|
struct sti_asc_uart {
|
|
u32 baudrate;
|
|
u32 txbuf;
|
|
u32 rxbuf;
|
|
u32 control;
|
|
u32 inten;
|
|
u32 status;
|
|
u32 guardtime;
|
|
u32 timeout;
|
|
u32 txreset;
|
|
u32 rxreset;
|
|
};
|
|
|
|
struct sti_asc_serial {
|
|
/* address of registers in physical memory */
|
|
struct sti_asc_uart *regs;
|
|
};
|
|
|
|
/* Values for the BAUDRATE Register */
|
|
#define PCLK (200ul * 1000000ul)
|
|
#define BAUDRATE_VAL_M0(bps) (PCLK / (16 * (bps)))
|
|
#define BAUDRATE_VAL_M1(bps) ((bps * (1 << 14)) + (1<<13)) / (PCLK/(1 << 6))
|
|
|
|
/*
|
|
* MODE 0
|
|
* ICCLK
|
|
* ASCBaudRate = ----------------
|
|
* baudrate * 16
|
|
*
|
|
* MODE 1
|
|
* baudrate * 16 * 2^16
|
|
* ASCBaudRate = ------------------------
|
|
* ICCLK
|
|
*
|
|
* NOTE:
|
|
* Mode 1 should be used for baudrates of 19200, and above, as it
|
|
* has a lower deviation error than Mode 0 for higher frequencies.
|
|
* Mode 0 should be used for all baudrates below 19200.
|
|
*/
|
|
|
|
static int sti_asc_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct sti_asc_serial *priv = dev_get_priv(dev);
|
|
struct sti_asc_uart *const uart = priv->regs;
|
|
unsigned long status;
|
|
|
|
status = readl(&uart->status);
|
|
if (input)
|
|
return status & STA_RBF;
|
|
else
|
|
return status & STA_TF;
|
|
}
|
|
|
|
static int _sti_asc_serial_setbrg(struct sti_asc_uart *uart, int baudrate)
|
|
{
|
|
unsigned long val;
|
|
int t, mode = 1;
|
|
|
|
switch (baudrate) {
|
|
case 9600:
|
|
t = BAUDRATE_VAL_M0(9600);
|
|
mode = 0;
|
|
break;
|
|
case 19200:
|
|
t = BAUDRATE_VAL_M1(19200);
|
|
break;
|
|
case 38400:
|
|
t = BAUDRATE_VAL_M1(38400);
|
|
break;
|
|
case 57600:
|
|
t = BAUDRATE_VAL_M1(57600);
|
|
break;
|
|
default:
|
|
debug("ASC: unsupported baud rate: %d, using 115200 instead.\n",
|
|
baudrate);
|
|
case 115200:
|
|
t = BAUDRATE_VAL_M1(115200);
|
|
break;
|
|
}
|
|
|
|
/* disable the baudrate generator */
|
|
val = readl(&uart->control);
|
|
writel(val & ~RUN, &uart->control);
|
|
|
|
/* set baud generator reload value */
|
|
writel(t, &uart->baudrate);
|
|
/* reset the RX & TX buffers */
|
|
writel(1, &uart->txreset);
|
|
writel(1, &uart->rxreset);
|
|
|
|
/* set baud generator mode */
|
|
if (mode)
|
|
val |= BAUDMODE;
|
|
|
|
/* finally, write value and enable ASC */
|
|
writel(val, &uart->control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called to adjust baud-rate */
|
|
static int sti_asc_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct sti_asc_serial *priv = dev_get_priv(dev);
|
|
struct sti_asc_uart *const uart = priv->regs;
|
|
|
|
return _sti_asc_serial_setbrg(uart, baudrate);
|
|
}
|
|
|
|
/* blocking function, that returns next char */
|
|
static int sti_asc_serial_getc(struct udevice *dev)
|
|
{
|
|
struct sti_asc_serial *priv = dev_get_priv(dev);
|
|
struct sti_asc_uart *const uart = priv->regs;
|
|
|
|
/* polling wait: for a char to be read */
|
|
if (!sti_asc_pending(dev, true))
|
|
return -EAGAIN;
|
|
|
|
return readl(&uart->rxbuf);
|
|
}
|
|
|
|
/* write write out a single char */
|
|
static int sti_asc_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct sti_asc_serial *priv = dev_get_priv(dev);
|
|
struct sti_asc_uart *const uart = priv->regs;
|
|
|
|
/* wait till safe to write next char */
|
|
if (sti_asc_pending(dev, false))
|
|
return -EAGAIN;
|
|
|
|
/* finally, write next char */
|
|
writel(c, &uart->txbuf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* initialize the ASC */
|
|
static int sti_asc_serial_probe(struct udevice *dev)
|
|
{
|
|
struct sti_asc_serial *priv = dev_get_priv(dev);
|
|
unsigned long val;
|
|
fdt_addr_t base;
|
|
|
|
base = devfdt_get_addr(dev);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
priv->regs = (struct sti_asc_uart *)base;
|
|
sti_asc_serial_setbrg(dev, gd->baudrate);
|
|
|
|
/*
|
|
* build up the value to be written to CONTROL
|
|
* set character length, bit stop number, odd parity
|
|
*/
|
|
val = RXENABLE | RUN | MODE_8BIT | STOP_1BIT | PARITYODD;
|
|
writel(val, &priv->regs->control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops sti_asc_serial_ops = {
|
|
.putc = sti_asc_serial_putc,
|
|
.pending = sti_asc_pending,
|
|
.getc = sti_asc_serial_getc,
|
|
.setbrg = sti_asc_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id sti_serial_of_match[] = {
|
|
{ .compatible = "st,asc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_sti_asc) = {
|
|
.name = "serial_sti_asc",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = sti_serial_of_match,
|
|
.ops = &sti_asc_serial_ops,
|
|
.probe = sti_asc_serial_probe,
|
|
.priv_auto_alloc_size = sizeof(struct sti_asc_serial),
|
|
};
|
|
|