u-boot-brain/arch/arm/cpu/armv7/sunxi
Chen-Yu Tsai ff2b47f6a9 ARM: sunxi: Add support for uart0 on port F (mmc0)
Allwinner SoCs provide uart0 muxed with mmc0, which can then be used
with a micro SD breakout board. On the A23, this is the only way to
use uart0.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-10-24 09:35:38 +02:00
..
board.c ARM: sunxi: Add support for uart0 on port F (mmc0) 2014-10-24 09:35:38 +02:00
clock_sun4i.c ahci: provide sunxi SATA driver using AHCI platform framework 2014-07-31 15:37:22 +02:00
clock_sun6i.c ARM: sun6i: Add clock support 2014-10-24 09:35:37 +02:00
clock.c sunxi: add sun7i clocks and timer support. 2014-05-25 16:12:12 +02:00
config.mk sunxi: non-FEL SPL boot support for sun7i 2014-05-25 16:31:03 +02:00
cpu_info.c ARM: sunxi: Add basic A31 support 2014-10-24 09:35:38 +02:00
dram.c sunxi: dram: Autodetect DDR3 bus width and density 2014-08-12 08:42:34 +02:00
Makefile ARM: sun6i: Add clock support 2014-10-24 09:35:37 +02:00
pinmux.c sunxi: add sun7i pinmux and gpio support 2014-05-25 16:12:21 +02:00
prcm.c ARM: sun6i: Add support for the power reset control module found on the A31 2014-10-24 09:35:37 +02:00
psci.S sunxi: HYP/non-sec: add sun7i PSCI backend 2014-07-31 15:37:24 +02:00
start.c sunxi: add sun7i cpu, board and start of day support 2014-05-25 16:12:40 +02:00
timer.c sunxi: add sun7i clocks and timer support. 2014-05-25 16:12:12 +02:00
u-boot-spl-fel.lds sunxi: Add i2c support 2014-07-18 19:41:30 +01:00
u-boot-spl.lds sunxi: Add i2c support 2014-07-18 19:41:30 +01:00