mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Marek Vasut](/assets/img/avatar_default.png)
Remove the support for not-CONFIG_SERIAL_MULTI part from serial port drivers and some board files. Since CONFIG_SERIAL_MULTI is now enabled by default, that part is a dead code. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
226 lines
6.4 KiB
C
226 lines
6.4 KiB
C
/*
|
|
* Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
|
|
* Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <linux/compiler.h>
|
|
#include <serial.h>
|
|
|
|
#define ZYNQ_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
|
|
#define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
|
|
|
|
#define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */
|
|
#define ZYNQ_UART_CR_RX_EN 0x00000004 /* RX enabled */
|
|
#define ZYNQ_UART_CR_TXRST 0x00000002 /* TX logic reset */
|
|
#define ZYNQ_UART_CR_RXRST 0x00000001 /* RX logic reset */
|
|
|
|
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
|
|
|
|
/* Some clock/baud constants */
|
|
#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
|
|
#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
|
|
|
|
struct uart_zynq {
|
|
u32 control; /* Control Register [8:0] */
|
|
u32 mode; /* Mode Register [10:0] */
|
|
u32 reserved1[4];
|
|
u32 baud_rate_gen; /* Baud Rate Generator [15:0] */
|
|
u32 reserved2[4];
|
|
u32 channel_sts; /* Channel Status [11:0] */
|
|
u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */
|
|
u32 baud_rate_divider; /* Baud Rate Divider [7:0] */
|
|
};
|
|
|
|
static struct uart_zynq *uart_zynq_ports[2] = {
|
|
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
|
|
[0] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR0,
|
|
#endif
|
|
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
|
|
[1] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR1,
|
|
#endif
|
|
};
|
|
|
|
struct uart_zynq_params {
|
|
u32 baudrate;
|
|
u32 clock;
|
|
};
|
|
|
|
static struct uart_zynq_params uart_zynq_ports_param[2] = {
|
|
#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0) && defined(CONFIG_ZYNQ_SERIAL_CLOCK0)
|
|
[0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0,
|
|
[0].clock = CONFIG_ZYNQ_SERIAL_CLOCK0,
|
|
#endif
|
|
#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1) && defined(CONFIG_ZYNQ_SERIAL_CLOCK1)
|
|
[1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1,
|
|
[1].clock = CONFIG_ZYNQ_SERIAL_CLOCK1,
|
|
#endif
|
|
};
|
|
|
|
/* Set up the baud rate in gd struct */
|
|
static void uart_zynq_serial_setbrg(const int port)
|
|
{
|
|
/* Calculation results. */
|
|
unsigned int calc_bauderror, bdiv, bgen;
|
|
unsigned long calc_baud = 0;
|
|
unsigned long baud = uart_zynq_ports_param[port].baudrate;
|
|
unsigned long clock = uart_zynq_ports_param[port].clock;
|
|
struct uart_zynq *regs = uart_zynq_ports[port];
|
|
|
|
/* master clock
|
|
* Baud rate = ------------------
|
|
* bgen * (bdiv + 1)
|
|
*
|
|
* Find acceptable values for baud generation.
|
|
*/
|
|
for (bdiv = 4; bdiv < 255; bdiv++) {
|
|
bgen = clock / (baud * (bdiv + 1));
|
|
if (bgen < 2 || bgen > 65535)
|
|
continue;
|
|
|
|
calc_baud = clock / (bgen * (bdiv + 1));
|
|
|
|
/*
|
|
* Use first calculated baudrate with
|
|
* an acceptable (<3%) error
|
|
*/
|
|
if (baud > calc_baud)
|
|
calc_bauderror = baud - calc_baud;
|
|
else
|
|
calc_bauderror = calc_baud - baud;
|
|
if (((calc_bauderror * 100) / baud) < 3)
|
|
break;
|
|
}
|
|
|
|
writel(bdiv, ®s->baud_rate_divider);
|
|
writel(bgen, ®s->baud_rate_gen);
|
|
}
|
|
|
|
/* Initialize the UART, with...some settings. */
|
|
static int uart_zynq_serial_init(const int port)
|
|
{
|
|
struct uart_zynq *regs = uart_zynq_ports[port];
|
|
|
|
if (!regs)
|
|
return -1;
|
|
|
|
/* RX/TX enabled & reset */
|
|
writel(ZYNQ_UART_CR_TX_EN | ZYNQ_UART_CR_RX_EN | ZYNQ_UART_CR_TXRST | \
|
|
ZYNQ_UART_CR_RXRST, ®s->control);
|
|
writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */
|
|
uart_zynq_serial_setbrg(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uart_zynq_serial_putc(const char c, const int port)
|
|
{
|
|
struct uart_zynq *regs = uart_zynq_ports[port];
|
|
|
|
while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
|
|
WATCHDOG_RESET();
|
|
|
|
if (c == '\n') {
|
|
writel('\r', ®s->tx_rx_fifo);
|
|
while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
|
|
WATCHDOG_RESET();
|
|
}
|
|
writel(c, ®s->tx_rx_fifo);
|
|
}
|
|
|
|
static void uart_zynq_serial_puts(const char *s, const int port)
|
|
{
|
|
while (*s)
|
|
uart_zynq_serial_putc(*s++, port);
|
|
}
|
|
|
|
static int uart_zynq_serial_tstc(const int port)
|
|
{
|
|
struct uart_zynq *regs = uart_zynq_ports[port];
|
|
|
|
return (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0;
|
|
}
|
|
|
|
static int uart_zynq_serial_getc(const int port)
|
|
{
|
|
struct uart_zynq *regs = uart_zynq_ports[port];
|
|
|
|
while (!uart_zynq_serial_tstc(port))
|
|
WATCHDOG_RESET();
|
|
return readl(®s->tx_rx_fifo);
|
|
}
|
|
|
|
/* Multi serial device functions */
|
|
#define DECLARE_PSSERIAL_FUNCTIONS(port) \
|
|
int uart_zynq##port##_init(void) \
|
|
{ return uart_zynq_serial_init(port); } \
|
|
void uart_zynq##port##_setbrg(void) \
|
|
{ return uart_zynq_serial_setbrg(port); } \
|
|
int uart_zynq##port##_getc(void) \
|
|
{ return uart_zynq_serial_getc(port); } \
|
|
int uart_zynq##port##_tstc(void) \
|
|
{ return uart_zynq_serial_tstc(port); } \
|
|
void uart_zynq##port##_putc(const char c) \
|
|
{ uart_zynq_serial_putc(c, port); } \
|
|
void uart_zynq##port##_puts(const char *s) \
|
|
{ uart_zynq_serial_puts(s, port); }
|
|
|
|
/* Serial device descriptor */
|
|
#define INIT_PSSERIAL_STRUCTURE(port, __name) { \
|
|
.name = __name, \
|
|
.start = uart_zynq##port##_init, \
|
|
.stop = NULL, \
|
|
.setbrg = uart_zynq##port##_setbrg, \
|
|
.getc = uart_zynq##port##_getc, \
|
|
.tstc = uart_zynq##port##_tstc, \
|
|
.putc = uart_zynq##port##_putc, \
|
|
.puts = uart_zynq##port##_puts, \
|
|
}
|
|
|
|
DECLARE_PSSERIAL_FUNCTIONS(0);
|
|
struct serial_device uart_zynq_serial0_device =
|
|
INIT_PSSERIAL_STRUCTURE(0, "ttyPS0");
|
|
DECLARE_PSSERIAL_FUNCTIONS(1);
|
|
struct serial_device uart_zynq_serial1_device =
|
|
INIT_PSSERIAL_STRUCTURE(1, "ttyPS1");
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
if (uart_zynq_ports[0])
|
|
return &uart_zynq_serial0_device;
|
|
if (uart_zynq_ports[1])
|
|
return &uart_zynq_serial1_device;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void zynq_serial_initalize(void)
|
|
{
|
|
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
|
|
serial_register(&uart_zynq_serial0_device);
|
|
#endif
|
|
#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
|
|
serial_register(&uart_zynq_serial1_device);
|
|
#endif
|
|
}
|