Stefan Roese e4bbed2803 ppc4xx: Change Luan config file to support ECC ... With the updated 44x DDR2 driver the Luan board now supports ECC generation and checking. Signed-off-by: Stefan Roese <sr@denx.de>		2007-06-01 13:45:24 +02:00
..
A3000.h
acadia.h	ppc4xx: Update AMCC Acadia support for board revision 1.1	2007-05-24 08:22:09 +02:00
ADCIOP.h
Adder.h	Add support for Adder boards with 16MB SDRAM;	2006-03-12 01:43:03 +01:00
ADNPESC1_base_32.h
ADNPESC1.h
ADS860.h
adsvix.h
aev.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
Alaska8220.h
alpr.h	[PATCH] alpr: Update alpr board config file	2007-01-30 12:51:07 +01:00
AmigaOneG3SE.h
AMX860.h
AP1000.h
APC405.h
AR405.h
armadillo.h
ASH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
assabet.h
at91rm9200dk.h
atc.h
atstk1002.h	Merge with /home/wd/git/u-boot/custodian/u-boot-avr32; code cleanup.	2007-04-18 16:53:52 +02:00
B2.h
BAB7xx.h
bamboo.h	ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver	2007-04-29 14:13:01 +02:00
barco.h
BC3450.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
bf533-ezkit.h	[Blackfin][PATCH] code cleanup	2007-03-12 00:25:14 +08:00
bf533-stamp.h	[Blackfin][PATCH] minor cleanup	2007-03-12 12:11:55 +08:00
bf537-stamp.h	[Blackfin][PATCH] Add BF537 stamp board support	2007-03-19 01:24:52 +08:00
bf561-ezkit.h	[Blackfin][PATCH] Add BF561 EZKIT board support	2007-03-20 18:16:24 +08:00
BMW.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
bubinga.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
c2mon.h
CANBT.h
canmb.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
CATcenter.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
CCM.h
cerf250.h
cm41xx.h
cm4008.h
cmc_pu2.h	Update configuration for CMC-PU2 board	2006-06-16 16:43:33 +02:00
cmi_mpc5xx.h
CMS700.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
CPC45.h
cpci5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
CPCI2DP.h	PMC405 and CPCI405: Moved configuration of pci resources into config file.	2006-01-18 20:03:15 +01:00
CPCI405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI405AB.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI405DT.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI440.h	Fix build problem with CPCI440	2006-09-07 12:48:49 +02:00
CPCI750.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
CPCI4052.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCIISER4.h
CPU86.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
CPU87.h	Code cleanup	2006-08-27 18:10:01 +02:00
cradle.h
CRAYL1.h
csb226.h
csb272.h
csb472.h
csb637.h
CU824.h
DASA_SIM.h
DB64360.h
DB64460.h
dbau1x00.h	* Fix dbau1x00 Board	2006-04-11 14:53:29 +02:00
debris.h
delta.h	Remove BOARDLIBS usage completely	2007-04-23 12:00:22 +02:00
DK1C20_safe_32.h
DK1C20_standard_32.h
DK1C20.h
DK1S10_mtx_ldk_20.h
DK1S10_safe_32.h
DK1S10_standard_32.h
DK1S10.h
dnp1110.h
DP405.h
DU405.h
EB+MCF-EV123.h	Minor code cleanup.	2006-06-10 22:00:40 +02:00
ebony.h	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board	2007-03-16 21:11:42 +01:00
ELPPC.h
ELPT860.h
ep82xxm.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
ep7312.h
ep8248.h
ep8260.h
EP1C20.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP1S10.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP1S40.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP88x.h	Add support for EmbeddedPlanet EP88x boards	2006-03-12 23:17:31 +01:00
ERIC.h
ESTEEM192E.h
ETX094.h
evb4510.h
EVB64260.h
eXalion.h
EXBITGEN.h
FADS823.h
FADS850SAR.h
FADS860T.h
FLAGADM.h
FPS850L.h
FPS860L.h
G2000.h
gcplus.h
GEN860T.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
GENIETV.h
gth2.h	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
GTH.h
gw8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
h2_p2_dbg_board.h
hermes.h
HH405.h	Merge the new NAND code (testing-NAND brach); see doc/README.nand	2006-03-06 11:25:22 +01:00
HIDDEN_DRAGON.h
hmi1001.h	Merge with /home/tur/git/u-boot#motionpro	2007-05-28 01:11:11 +02:00
HMI10.h
HUB405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
hymod.h
IAD210.h
IceCube.h	Merge with /home/tur/git/u-boot#motionpro	2007-05-28 01:11:11 +02:00
ICU862.h
idmr.h	[iDMR] Add MTD and JFFS2 support, also add default partition definition.	2007-01-23 17:22:06 +01:00
IDS8247.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
impa7.h
incaip.h
inka4x0.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
innokom.h
integratorap.h
integratorcp.h
IP860.h
IPHASE4539.h
ISPAN.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
IVML24.h
IVMS8.h
ixdp425.h	* Update Intel IXP4xx support	2006-05-30 15:56:48 +02:00
ixdpg425.h	* Update Intel IXP4xx support	2006-05-30 15:56:48 +02:00
JSE.h
jupiter.h	Make SC3 board build with 'make O='; use 'addcons' consistently	2007-03-13 16:05:55 +01:00
KAREF.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
katmai.h	ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai	2007-04-19 09:53:52 +02:00
kb9202.h
KUP4K.h
KUP4X.h
kvme080.h	Add support for KVME080 board	2006-07-21 11:29:20 +02:00
LANTEC.h
lart.h
logodl.h
lpc2292sodimm.h	Add port for the lpc2292sodimm evaluation board from EmbeddedArtists	2007-01-24 12:16:56 +01:00
lpd7a400-10.h
lpd7a400.h
lpd7a404-10.h
lpd7a404.h
luan.h	ppc4xx: Change Luan config file to support ECC	2007-06-01 13:45:24 +02:00
lubbock.h
lwmon.h
M5271EVB.h	Enable autoboot for M5271EVB board.	2006-05-17 12:16:26 +02:00
M5272C3.h
M5282EVB.h
MBX860T.h
MBX.h
mcc200.h	Merge with /home/tur/git/u-boot#motionpro	2007-05-28 01:11:11 +02:00
mecp5200.h	Minor code cleanup.	2007-02-27 14:26:04 +01:00
METROBOX.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
MHPC.h
MIP405.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
ml300.h
ml401.h	Coding Style Cleanup, new CHANGELOG	2007-05-16 00:13:33 +02:00
ML2.h
modnet50.h
motionpro.h	Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.	2007-05-27 17:26:46 +02:00
MOUSSE.h
mp2usb.h
mpc7448hpc2.h	Some code cleanup.	2007-03-04 01:36:05 +01:00
MPC86xADS.h	Switch MPC86xADS and MPC885ADS boards to use cpuclk environment	2006-03-12 01:55:43 +01:00
MPC832XEMDS.h	mpc83xx: update [local-]mac-address properties on UEC based devices	2007-03-02 11:05:54 -06:00
MPC885ADS.h	Switch MPC86xADS and MPC885ADS boards to use cpuclk environment	2006-03-12 01:55:43 +01:00
MPC8260ADS.h
MPC8266ADS.h
MPC8313ERDB.h	Minor Coding Style cleanup, update CHANGELOG.	2007-05-16 01:16:53 +02:00
MPC8349EMDS.h	mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode	2007-03-02 14:08:26 -06:00
MPC8349ITX.h	Fix memory initialization on MPC8349E-mITX	2007-05-01 12:10:26 -05:00
MPC8360EMDS.h	Add a flattened device tree (fdt) command (2 of 2)	2007-03-31 12:23:51 -04:00
MPC8540ADS.h	Fix PCI I/O space mapping on Freescale MPC85x0ADS	2007-04-23 19:58:28 -05:00
MPC8540EVAL.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8541CDS.h	Fix PCI I/O space mapping on Freescale MPC85x0ADS	2007-04-23 19:58:28 -05:00
MPC8544DS.h	Add MPC8544DS main configuration file.	2007-04-23 19:58:28 -05:00
MPC8548CDS.h	Cleaned up some 85xx PCI bugs	2007-05-02 15:50:13 -05:00
MPC8555CDS.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8560ADS.h	Fix PCI I/O space mapping on Freescale MPC85x0ADS	2007-04-23 19:58:28 -05:00
MPC8568MDS.h	Coding stylke cleanup; update CHANGELOG.	2007-05-05 18:23:11 +02:00
MPC8641HPCN.h	Add flash cmd function to 8641HPCN ramboot	2007-03-22 11:02:34 -05:00
MUSENKI.h
MVBLUE.h
MVS1.h
mx1ads.h
mx1fs2.h
NC650.h	Fix breakage of NC650 board with respect to nand support.	2007-04-20 12:01:47 +02:00
NETPHONE.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
netstar.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
NETTA2.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
NETTA.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
NETVIA.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
ns9750dev.h
NSCU.h
NX823.h
o2dnt.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
ocotea.h	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board	2007-03-07 16:43:00 +01:00
OCRTC.h
omap730.h
omap730p2.h
omap1510.h
omap1510inn.h
omap1610h2.h
omap1610inn.h
omap2420h4.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
omap5912osk.h	Update omap5912osk board support	2006-05-10 10:55:16 +02:00
ORSG.h
OXC.h
p3mx.h	[PATCH] Update Prodrive P3Mx support	2007-01-18 11:54:52 +01:00
p3p440.h	Merge with /home/sr/git/u-boot/cfi-flash	2006-04-06 00:16:58 +02:00
P3G4.h
PATI.h
pb1x00.h
PCI405.h	[PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405	2007-03-14 22:09:31 +01:00
PCI5441.h
PCIPPC2.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PCIPPC6.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
pcs440ep.h	Add support for AMCC Sequoia PPC440EPx eval board	2006-09-07 11:51:23 +02:00
pcu_e.h
pdnb3.h	[PATCH] Update Prodrive SCPU (PDNB3 variant) board	2007-01-30 15:01:49 +01:00
pf5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
PIP405.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
PK1C20.h	Update PK1C20 board	2006-06-08 12:03:21 -04:00
pleb2.h
PLU405.h	fixed ethernet phy configuration for plu405 board	2007-03-08 22:14:47 +01:00
PM520.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
PM826.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM828.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM854.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
PM856.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
PMC405.h	PMC405 and CPCI405: Moved configuration of pci resources into config file.	2006-01-18 20:03:15 +01:00
PN62.h
PPChameleonEVB.h	Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)	2006-03-31 14:32:07 +02:00
ppmc7xx.h	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
ppmc8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
purple.h
pxa255_idp.h
QS823.h
QS850.h
QS860T.h
quantum.h
r5200.h	Minor cleanup.	2006-05-10 17:43:20 +02:00
R360MPI.h
Rattler.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
RBC823.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
rmu.h
RPXClassic.h
RPXlite_DW.h	Add support for Lite5200B board.	2006-03-17 11:42:53 +01:00
RPXlite.h	RPXlite configuration fixes	2006-03-12 01:48:55 +01:00
RPXsuper.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
RRvision.h
rsdproto.h
sacsng.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
Sandpoint8240.h
Sandpoint8245.h
sbc405.h
sbc2410x.h	Code cleanup	2006-07-21 11:56:05 +02:00
sbc8240.h
sbc8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
sbc8349.h	mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode	2007-03-02 14:08:26 -06:00
sbc8560.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
SBC8540.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
sc3.h	Update for SC3 board	2007-04-11 17:22:55 +02:00
sc520_cdp.h
sc520_spunk_rel.h
sc520_spunk.h
scb9328.h
SCM.h
sequoia.h	[PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file	2007-05-07 19:42:49 +02:00
shannon.h
SL8245.h
SM850.h
smdk2400.h
smdk2410.h
smmaco4.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
sorcery.h	Fix build problems on sorcery board.	2006-09-04 02:01:27 +02:00
spc1920.h	SPC1920: cleanup memory contoller setup	2007-01-09 16:02:48 +01:00
SPD823TS.h
spieval.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
stxgp3.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
stxssa.h	Update board configuration for STX GP3SSA board:	2007-05-03 16:34:41 +02:00
stxxtc.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
suzaku.h	[CLEAN] Remove inefficient Suzaku code	2007-03-30 22:42:45 +02:00
svm_sc8xx.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
SX1.h
SXNI855T.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
taishan.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
TASREG.h
tb0229.h
TB5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
TOP860.h
TOP5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
Total5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
TQM85xx.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM823L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM823M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM834x.h	mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode	2007-03-02 14:08:26 -06:00
TQM850L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM850M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM855L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM855M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM860L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM860M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM862L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM862M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM866M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM885D.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM5200.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
TQM8260.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM8272.h	Minor code cleanup.	2006-12-24 01:42:57 +01:00
trab.h	Fix some bugs in TRAB board flash driver.	2006-07-19 14:13:02 +02:00
uc100.h
uc101.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
utx8245.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
v37.h
v38b.h	MPC5xxx: Change names of defines related to IPB and PCI clocks.	2007-05-27 16:53:43 +02:00
VCMA9.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
versatile.h
virtlab2.h	Add support for VirtLab2 board	2006-05-12 16:15:46 +02:00
VOH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
voiceblue.h	VoiceBlue update: use new MTD flash partitioning methods, use more	2006-05-03 08:34:03 +02:00
VOM405.h
VoVPN-GW.h
W7OLMC.h
W7OLMG.h
walnut.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
wepep250.h
WUH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
xaeniax.h
xm250.h	Enable initrd ATAG for xm250 board.	2006-07-21 11:36:48 +02:00
XPEDITE1K.h
xsengine.h
xupv2p.h	Merge git://www.denx.de/git/u-boot	2007-05-08 00:32:35 +02:00
yosemite.h	Merge some AMCC make targets to keep the top-level Makefile smaller	2007-03-28 15:03:16 +02:00
yucca.h	ppc4xx: Change Yucca config file to support ECC	2007-03-31 08:48:36 +02:00
Yukon8220.h
ZPC1900.h	Memory configuration changes for ZPC.1900 board	2006-03-12 01:45:44 +01:00
ZUMA.h
zylonite.h	Remove BOARDLIBS usage completely	2007-04-23 12:00:22 +02:00