mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Timur Tabi](/assets/img/avatar_default.png)
Most 85xx boards can be built as a 32-bit or a 36-bit. Current code sometimes displays which of these is actually built, but it's inconsistent. This is especially problematic since the "default" build for a given 85xx board can be either one, so if you don't see a message, you can't always know which size is being used. Not only that, but each board includes code that displays the message, so there is duplication. The 'bdinfo' command has been updated to display this information, so we don't need to display it at boot time. The board-specific code is deleted. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
242 lines
6.2 KiB
C
242 lines
6.2 KiB
C
/*
|
|
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
|
|
#include "../common/ngpixis.h"
|
|
#include "corenet_ds.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard (void)
|
|
{
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->cpu;
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
unsigned int i;
|
|
|
|
printf("Board: %sDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
|
|
|
|
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
|
|
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("Promjet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
|
|
|
|
/* Display the RCW, so that no one gets confused as to what RCW
|
|
* we're actually using for this boot.
|
|
*/
|
|
puts("Reset Configuration Word (RCW):");
|
|
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
|
|
u32 rcw = in_be32(&gur->rcwsr[i]);
|
|
|
|
if ((i % 4) == 0)
|
|
printf("\n %08x:", i * 4);
|
|
printf(" %08x", rcw);
|
|
}
|
|
puts("\n");
|
|
|
|
/* Display the actual SERDES reference clocks as configured by the
|
|
* dip switches on the board. Note that the SWx registers could
|
|
* technically be set to force the reference clocks to match the
|
|
* values that the SERDES expects (or vice versa). For now, however,
|
|
* we just display both values and hope the user notices when they
|
|
* don't match.
|
|
*/
|
|
puts("SERDES Reference Clocks: ");
|
|
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
static const char *freq[] = {"100", "125", "156.25", "212.5" };
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
|
|
printf("Bank%u=%sMhz ", i+1, freq[clock]);
|
|
}
|
|
puts("\n");
|
|
#else
|
|
sw = in_8(&PIXIS_SW(3));
|
|
printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
|
|
printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
|
|
printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
/*
|
|
* P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
|
|
* disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
|
|
* the noise introduced by these unterminated and unused clock pairs.
|
|
*/
|
|
setbits_be32(&gur->ddrclkdr, 0x001B001B);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
|
|
|
|
set_liodns();
|
|
#ifdef CONFIG_SYS_DPAA_QBMAN
|
|
setup_portals();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *serdes_clock_to_string(u32 clock)
|
|
{
|
|
switch(clock) {
|
|
case SRDS_PLLCR0_RFCK_SEL_100:
|
|
return "100";
|
|
case SRDS_PLLCR0_RFCK_SEL_125:
|
|
return "125";
|
|
case SRDS_PLLCR0_RFCK_SEL_156_25:
|
|
return "156.25";
|
|
default:
|
|
return "150";
|
|
}
|
|
}
|
|
|
|
#define NUM_SRDS_BANKS 3
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 actual[NUM_SRDS_BANKS];
|
|
unsigned int i;
|
|
u8 sw;
|
|
|
|
#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
|
|
sw = in_8(&PIXIS_SW(5));
|
|
for (i = 0; i < 3; i++) {
|
|
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
|
|
switch (clock) {
|
|
case 0:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
|
|
break;
|
|
case 1:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
|
|
break;
|
|
case 2:
|
|
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
|
|
break;
|
|
default:
|
|
printf("Warning: SDREFCLK%u switch setting of '11' is "
|
|
"unsupported\n", i + 1);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
/* Warn if the expected SERDES reference clocks don't match the
|
|
* actual reference clocks. This needs to be done after calling
|
|
* p4080_erratum_serdes8(), since that function may modify the clocks.
|
|
*/
|
|
sw = in_8(&PIXIS_SW(3));
|
|
actual[0] = (sw & 0x40) ?
|
|
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
|
|
actual[1] = (sw & 0x20) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
actual[2] = (sw & 0x10) ?
|
|
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
|
if (expected != actual[i]) {
|
|
printf("Warning: SERDES bank %u expects reference clock"
|
|
" %sMHz, but actual is %sMHz\n", i + 1,
|
|
serdes_clock_to_string(expected),
|
|
serdes_clock_to_string(actual[i]));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
}
|