mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 21:33:24 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
enable DTS support for keymile mpc83xx based boards.
get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Therefore done:
- add DTS for all mpc83xx based boards from keymile
mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
in board code, but not in linux DTS
- remove not used ethernet nodes
Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Series-to: u-boot
Series-version: 3
Series-changes: 3
- rebase patchset to current mainline commit
c0192950df
- update defconfig files
Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
keymile to DM_ETH
Cover-letter:
powerpc, mpc83xx: add DM_ETH support
This patch series adds DM ethernet support for mpc83xx based
keymile boards.
Travis build:
END
481 lines
12 KiB
Plaintext
481 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ABB PGGA KMETER1 Device Tree Source
|
|
*
|
|
* 2008-2011 DENX Software Engineering GmbH
|
|
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "km836x.dtsi"
|
|
|
|
/ {
|
|
model = "KMETER1";
|
|
compatible = "ABB,KMETER1";
|
|
|
|
aliases {
|
|
ethernet0 = &enet_piggy2;
|
|
ethernet1 = &enet_estar1;
|
|
ethernet2 = &enet_estar2;
|
|
ethernet3 = &enet_eth1;
|
|
ethernet4 = &enet_eth2;
|
|
ethernet5 = &enet_eth3;
|
|
ethernet6 = &enet_eth4;
|
|
serial0 = &serial0;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
mux@70 {
|
|
compatible = "nxp,pca9547";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Inventory EEPROM of the unit itself */
|
|
ivm@50 {
|
|
label = "MAIN_CTRL";
|
|
compatible = "dummy";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Temperature sensors */
|
|
temp@48 {
|
|
label = "Top";
|
|
compatible = "national,lm75";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
temp@49 {
|
|
label = "Control";
|
|
compatible = "national,lm75";
|
|
reg = <0x49>;
|
|
};
|
|
|
|
temp@4a {
|
|
label = "Power";
|
|
compatible = "national,lm75";
|
|
reg = <0x4a>;
|
|
};
|
|
|
|
temp@4b {
|
|
label = "Front";
|
|
compatible = "national,lm75";
|
|
reg = <0x4b>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&serial0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&par_io {
|
|
pio_ucc1: ucc_pin@0 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
0 3 1 0 1 0 /* TxD0 */
|
|
0 4 1 0 1 0 /* TxD1 */
|
|
0 5 1 0 1 0 /* TxD2 */
|
|
0 6 1 0 1 0 /* TxD3 */
|
|
0 9 2 0 1 0 /* RxD0 */
|
|
0 10 2 0 1 0 /* RxD1 */
|
|
0 11 2 0 1 0 /* RxD2 */
|
|
0 12 2 0 1 0 /* RxD3 */
|
|
0 7 1 0 1 0 /* TX_EN */
|
|
0 8 1 0 1 0 /* TX_ER */
|
|
0 15 2 0 1 0 /* RX_DV */
|
|
0 16 2 0 1 0 /* RX_ER */
|
|
0 0 2 0 1 0 /* RX_CLK */
|
|
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
|
|
2 8 2 0 1 0 /* GTX125 - CLK9 */
|
|
>;
|
|
};
|
|
|
|
pio_ucc2: ucc_pin@1 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
0 17 1 0 1 0 /* TxD0 */
|
|
0 18 1 0 1 0 /* TxD1 */
|
|
0 19 1 0 1 0 /* TxD2 */
|
|
0 20 1 0 1 0 /* TxD3 */
|
|
0 23 2 0 1 0 /* RxD0 */
|
|
0 24 2 0 1 0 /* RxD1 */
|
|
0 25 2 0 1 0 /* RxD2 */
|
|
0 26 2 0 1 0 /* RxD3 */
|
|
0 21 1 0 1 0 /* TX_EN */
|
|
0 22 1 0 1 0 /* TX_ER */
|
|
0 29 2 0 1 0 /* RX_DV */
|
|
0 30 2 0 1 0 /* RX_ER */
|
|
0 31 2 0 1 0 /* RX_CLK */
|
|
2 2 1 0 2 0 /* GTX_CLK - CLK3 */
|
|
2 3 2 0 1 0 /* GTX125 - CLK4 */
|
|
>;
|
|
};
|
|
|
|
pio_ucc4: ucc_pin@3 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
|
|
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
|
|
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
|
|
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
|
|
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
|
|
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
|
|
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
|
|
|
|
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc5: ucc_pin@4 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
|
|
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
|
|
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
|
|
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
|
|
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
|
|
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
|
|
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc6: ucc_pin@5 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
|
|
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
|
|
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
|
|
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
|
|
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
|
|
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
|
|
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc7: ucc_pin@6 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
|
|
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
|
|
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
|
|
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
|
|
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
|
|
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
|
|
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc8: ucc_pin@7 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0 /* MDC */
|
|
|
|
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
|
|
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
|
|
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
|
|
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
|
|
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
|
|
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
|
|
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
|
|
|
|
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
|
|
>;
|
|
};
|
|
|
|
pio_spi: spi_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
4 28 3 0 3 0 /* SPI_MOSI (PE28, out, f3 */
|
|
4 30 3 0 3 0 /* SPI_CLK (PE30, out, f3 */
|
|
>;
|
|
};
|
|
|
|
/* UCC3 as HDLC controller for ICN */
|
|
pio5: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
1 0 1 0 1 0 /* TxD0 */
|
|
1 6 2 0 1 0 /* RxD0 */
|
|
1 12 2 0 1 0 /* CTS */
|
|
2 11 2 0 1 0 /* TX-CLK12 */
|
|
>;
|
|
};
|
|
|
|
pio_tdm: tdm_pin@00 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
/* TDMa */
|
|
0 8 3 0 2 0 /* RxD0 (PA8, bi, f2) */
|
|
0 13 3 0 2 0 /* TxD0 (PA13, bi, f2) */
|
|
0 14 2 0 2 0 /* RSync0 (PA14, in, f2) */
|
|
2 7 2 0 1 0 /* RxClk8 (PC7, in, f1) */
|
|
/* TDMb */
|
|
0 27 3 0 2 0 /* RxD1 (PA27, bi, f2) */
|
|
0 22 3 0 2 0 /* TxD1 (PA22, bi, f2) */
|
|
0 28 2 0 2 0 /* RSync1 (PA28, in, f2) */
|
|
2 1 2 0 1 0 /* RxClk2 (PC1, in, f1) */
|
|
/* TDMc */
|
|
1 5 3 0 2 0 /* RxD2 (PB5, bi, f2) */
|
|
1 8 3 0 2 0 /* TxD2 (PB8, bi, f2) */
|
|
1 2 2 0 3 0 /* RSync2 (PB2, in, f3) */
|
|
2 6 2 0 1 0 /* RxClk7 (PC6, in, f1) */
|
|
/* TDMd */
|
|
1 22 3 0 2 0 /* RxD3 (PB22, bi, f2) */
|
|
1 19 3 0 1 0 /* TxD3 (PB19, bi, f1) */
|
|
1 16 2 0 2 0 /* RSync3 (PB16, in, f2) */
|
|
2 13 2 0 1 0 /* RxClk14 (PC13, in, f1) */
|
|
/* TDMe */
|
|
3 8 3 0 2 0 /* RxD4 (PD8, bi, f2) */
|
|
3 5 3 0 2 0 /* TxD4 (PD5, bi, f2) */
|
|
3 2 2 0 2 0 /* RSync4 (PD2 , in, f2) */
|
|
2 22 2 0 1 0 /* RxClk23 (PC22, in, f1) */
|
|
/* TDMf */
|
|
3 19 3 0 2 0 /* RxD5 (PD19, bi, f2) */
|
|
3 22 3 0 2 0 /* TxD5 (PD22, bi, f2) */
|
|
3 16 2 0 1 0 /* RSync5 (PD16, in, f1) */
|
|
2 17 2 0 1 0 /* RxClk18 (PC17, in, f1) */
|
|
/* TDMg */
|
|
4 8 3 0 2 0 /* RxD6 (PE8, bi, f2) */
|
|
4 5 3 0 2 0 /* TxD6 (PE5, bi, f2) */
|
|
4 2 2 0 1 0 /* RSync6 (PE2, in, f1) */
|
|
2 19 2 0 1 0 /* RxClk20 (PC19, in, f1) */
|
|
/* TDMh */
|
|
4 19 3 0 2 0 /* RxD7 (PE19, bi, f2) */
|
|
4 22 3 0 3 0 /* TxD7 (PE22, bi, f3) */
|
|
4 16 2 0 2 0 /* RSync7 (PE16, in, f2) */
|
|
2 21 2 0 1 0 /* RxClk22 (PC21, in, f1) */
|
|
/* RxTxClk0/1 */
|
|
2 0 2 0 1 0 /* Clk1 (PC0, in, f1) */
|
|
2 23 2 0 1 0 /* Clk24 (PC23, in, f1) */
|
|
/* RxTxSync0/1 */
|
|
2 10 2 0 1 0 /* Clk11 (PC10, in, f1) */
|
|
2 20 2 0 1 0>; /* Clk21 (PC20, in, f1) */
|
|
};
|
|
};
|
|
|
|
&qe {
|
|
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
|
|
enet_estar1: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk9";
|
|
phy-handle = <&phy_estar1>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio_ucc1>;
|
|
};
|
|
|
|
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
|
|
enet_estar2: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk4";
|
|
phy-handle = <&phy_estar2>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio_ucc2>;
|
|
};
|
|
|
|
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
|
|
enet_piggy2: ucc@3200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <4>;
|
|
reg = <0x3200 0x200>;
|
|
interrupts = <35>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
phy-handle = <&phy_piggy2>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc4>;
|
|
};
|
|
|
|
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
|
|
enet_eth1: ucc@2400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <5>;
|
|
reg = <0x2400 0x200>;
|
|
interrupts = <40>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth1>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc5>;
|
|
};
|
|
|
|
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
|
|
enet_eth2: ucc@3400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <6>;
|
|
reg = <0x3400 0x200>;
|
|
interrupts = <41>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth2>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc6>;
|
|
};
|
|
|
|
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
|
|
enet_eth3: ucc@2600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <7>;
|
|
reg = <0x2600 0x200>;
|
|
interrupts = <42>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth3>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc7>;
|
|
};
|
|
|
|
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
|
|
enet_eth4: ucc@3600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <8>;
|
|
reg = <0x3600 0x200>;
|
|
interrupts = <43>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_eth4>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc8>;
|
|
};
|
|
|
|
mdio@3320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3320 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
|
|
phy_piggy2: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
};
|
|
|
|
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
|
|
phy_eth1: ethernet-phy@8 {
|
|
reg = <0x08>;
|
|
};
|
|
|
|
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
|
|
phy_eth2: ethernet-phy@9 {
|
|
reg = <0x09>;
|
|
};
|
|
|
|
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
|
|
phy_eth3: ethernet-phy@a {
|
|
reg = <0x0a>;
|
|
};
|
|
|
|
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
|
|
phy_eth4: ethernet-phy@b {
|
|
reg = <0x0b>;
|
|
};
|
|
|
|
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
|
|
phy_estar1: ethernet-phy@10 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <17 0x8>;
|
|
reg = <0x10>;
|
|
};
|
|
|
|
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
|
|
phy_estar2: ethernet-phy@11 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <18 0x8>;
|
|
reg = <0x11>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&localbus {
|
|
ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */
|
|
1 0 0xe8000000 0x01000000 /* LB 1 */
|
|
3 0 0xa0000000 0x10000000>; /* LB 3 */
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x04000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <2>;
|
|
partition@0 { /* 768KB */
|
|
label = "u-boot";
|
|
reg = <0 0xC0000>;
|
|
};
|
|
partition@c0000 { /* 128KB */
|
|
label = "env";
|
|
reg = <0xC0000 0x20000>;
|
|
};
|
|
partition@e0000 { /* 128KB */
|
|
label = "envred";
|
|
reg = <0xE0000 0x20000>;
|
|
};
|
|
partition@100000 { /* 64512KB */
|
|
label = "ubi0";
|
|
reg = <0x100000 0x3F00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "kmeter1-uboot.dtsi"
|