Lokesh Vutla e3ce3aa103 ARM: DRA7: emif: Check for enable bits before updating leveling output ... Read and write leveling can be enabled independently. Check for these enable bits before updating the read and write leveling output values. This will allow to use the combination of software and hardware leveling. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2016-03-14 19:18:47 -04:00
..
abb.c	replace DIV_ROUND with DIV_ROUND_CLOSEST	2014-11-20 11:28:25 -05:00
boot-common.c	omap3: Use raw SPL by default for mmc1	2016-03-08 15:01:46 -05:00
clocks-common.c	ARM: OMAP4/5: Centralize early clock initialization	2016-03-14 19:18:32 -04:00
emif-common.c	ARM: DRA7: emif: Check for enable bits before updating leveling output	2016-03-14 19:18:47 -04:00
hwinit-common.c	ARM: OMAP4/5: Add generic board detection hook	2016-03-14 19:18:34 -04:00
lowlevel_init.S	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
Makefile	arm: omap-common: do not build timer when CONFIG_TIMER defined	2016-01-20 19:06:21 -07:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ahci: mmio_base is a virtual address	2015-04-18 16:54:29 -04:00
timer.c	omap-common/hwinit-common.c: timer_init() doesn't need to touch gd	2015-01-05 15:13:45 -05:00
u-boot-spl.lds	arm: Add missing .vectors section to linker scripts	2014-08-30 07:46:41 -04:00
utils.c	armv7: Add missing newline after OMAP die ID	2016-01-20 10:19:38 -05:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00