u-boot-brain/common/cmd_reiser.c
Simon Glass 4c12eeb8b5 Convert cmd_usage() calls in common to use a return value
Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:46 +01:00

238 lines
5.7 KiB
C

/*
* (C) Copyright 2003 - 2004
* Sysgo Real-Time Solutions, AG <www.elinos.com>
* Pavel Bartusek <pba@sysgo.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Reiserfs support
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <image.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <reiserfs.h>
#include <part.h>
#ifndef CONFIG_DOS_PARTITION
#error DOS partition support must be selected
#endif
/* #define REISER_DEBUG */
#ifdef REISER_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = "/";
int dev=0;
int part=1;
char *ep;
block_dev_desc_t *dev_desc=NULL;
int part_length;
if (argc < 3)
return CMD_RET_USAGE;
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc == NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
if (argc == 4) {
filename = argv[3];
}
PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
if ((part_length = reiserfs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (!reiserfs_mount(part_length)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (reiserfs_ls (filename)) {
printf ("** Error reiserfs_ls() **\n");
return 1;
};
return 0;
}
U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
* Reiserfs boot command intepreter. Derived from diskboot
*/
int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *filename = NULL;
char *ep;
int dev, part = 0;
ulong addr = 0, part_length, filelen;
disk_partition_t info;
block_dev_desc_t *dev_desc = NULL;
char buf [12];
unsigned long count;
char *addr_str;
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
if (addr_str != NULL) {
addr = simple_strtoul (addr_str, NULL, 16);
} else {
addr = CONFIG_SYS_LOAD_ADDR;
}
filename = getenv ("bootfile");
count = 0;
break;
case 4:
addr = simple_strtoul (argv[3], NULL, 16);
filename = getenv ("bootfile");
count = 0;
break;
case 5:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = 0;
break;
case 6:
addr = simple_strtoul (argv[3], NULL, 16);
filename = argv[4];
count = simple_strtoul (argv[5], NULL, 16);
break;
default:
return CMD_RET_USAGE;
}
if (!filename) {
puts ("\n** No boot file defined **\n");
return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc==NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part);
if (part != 0) {
if (get_partition_info (dev_desc, part, &info)) {
printf ("** Bad partition %d **\n", part);
return 1;
}
if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
return 1;
}
PRINTF ("\nLoading from block device %s device %d, partition %d: "
"Name: %.32s Type: %.32s File:%s\n",
argv[1], dev, part, info.name, info.type, filename);
} else {
PRINTF ("\nLoading from block device %s device %d, File:%s\n",
argv[1], dev, filename);
}
if ((part_length = reiserfs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
if (!reiserfs_mount(part_length)) {
printf ("** Bad Reiserfs partition or disk - %s %d:%d **\n", argv[1], dev, part);
return 1;
}
filelen = reiserfs_open(filename);
if (filelen < 0) {
printf("** File not found %s\n", filename);
return 1;
}
if ((count < filelen) && (count != 0)) {
filelen = count;
}
if (reiserfs_read((char *)addr, filelen) != filelen) {
printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
return 1;
}
/* Loading ok, update default load address */
load_addr = addr;
printf ("\n%ld bytes read\n", filelen);
sprintf(buf, "%lX", filelen);
setenv("filesize", buf);
return filelen;
}
U_BOOT_CMD(
reiserload, 6, 0, do_reiserload,
"load binary file from a Reiser filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
" to address 'addr' from dos filesystem"
);