brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity
e37ac717d7
u-boot-brain/board/grinn/chiliboard
History
Marcin Niestroj 70c44f1718 ARM: chiliboard: remove dead !CONFIG_DM_SERIAL code 
DM_SERIAL is selected by TARGET_CHILIBOARD, so there is no reason to
keep code that will not be built. Remove it.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-11-26 22:52:14 -05:00
..
board.c ARM: chiliboard: remove dead !CONFIG_DM_SERIAL code 2018-11-26 22:52:14 -05:00
Kconfig board/chiliboard: Add support for chiliBoard 2017-01-28 14:04:37 -05:00
MAINTAINERS board/chiliboard: Add support for chiliBoard 2017-01-28 14:04:37 -05:00
Makefile SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README board/chiliboard: Add support for chiliBoard 2017-01-28 14:04:37 -05:00

README 

How to use U-Boot on Grinn's chiliBoard
--------------------------------------

- Build U-Boot for chiliBoard:

$ make mrproper
$ make chiliboard_defconfig
$ make

This will generate the SPL image called MLO and the u-boot.img.

- Flash the SPL image into the micro SD card:

sudo dd if=MLO of=/dev/mmcblk0 bs=128k; sync

- Flash the u-boot.img image into the micro SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=128k seek=3; sync

- Jumper settings:

S2: 1 1 1 0 1 0

where 0 means bottom position and 1 means top position (from the
switch label numbers reference).

- Insert the micro SD card in the board.

- Connect USB cable between chiliBoard and the PC for the power and console.

- U-Boot messages should come up.