Icenowy Zheng e37a1b17e7 sunxi: switch PRCM to non-secure on H3/H5 SoCs ... The PRCM of H3/H5 SoCs have a secure/non-secure switch, which controls the access to some clock/power related registers in PRCM. Current Linux kernel will access the CPUS (AR100) clock in the PRCM block, so the PRCM should be switched to non-secure. Add code to switch the PRCM to non-secure. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@openedev.com>		2017-08-11 15:49:39 +05:30
..
dram_timings	sunxi: add LPDDR3 timing from stock boot0	2017-06-08 22:37:55 +05:30
board.c	sunxi: i2c: Add support for DM I2C	2017-04-28 09:19:03 +02:00
clock_sun4i.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
clock_sun6i.c	sunxi: switch PRCM to non-secure on H3/H5 SoCs	2017-08-11 15:49:39 +05:30
clock_sun8i_a83t.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
clock_sun9i.c	sunxi: add initial clock setup for sun9i for SPL	2016-10-30 11:38:04 +01:00
clock.c	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
cpu_info.c	sunxi: add basic V3s support	2017-04-21 09:23:17 +02:00
dram_helpers.c	ARM: Rework and correct barrier definitions	2016-08-05 07:23:57 -04:00
dram_sun4i.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
dram_sun6i.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
dram_sun8i_a23.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
dram_sun8i_a33.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
dram_sun8i_a83t.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
dram_sun9i.c	sunxi: DRAM initialisation for sun9i	2016-10-30 11:38:04 +01:00
dram_sunxi_dw.c	sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller	2017-06-08 22:37:55 +05:30
gtbus_sun9i.c	sunxi: add gtbus-initialisation for sun9i	2016-10-30 11:38:04 +01:00
Kconfig	Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig	2017-07-25 21:08:01 -04:00
Makefile	sunxi: Add selective DRAM type and timing	2017-06-08 22:37:55 +05:30
p2wi.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
pinmux.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
pmic_bus.c	sunxi: Enable AXP221s in I2C mode with the R40 SoC	2017-04-20 13:30:00 +02:00
prcm.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
rmr_switch.S	sunxi: A64: do an RMR switch if started in AArch32 mode	2017-01-04 16:37:42 +01:00
rsb.c	sunxi: Move cpu independent code to mach directory	2016-04-01 09:52:28 +02:00
usb_phy.c	sunxi: prepare for sharing MACH_SUN8I_H3 config symbol	2017-04-05 15:03:17 +05:30