mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![York Sun](/assets/img/avatar_default.png)
The LS2085ARDB is a evaluation platform that supports LS2085A family SoCs. This patch add sbasic support for the platform. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
193 lines
5.2 KiB
C
193 lines
5.2 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <fsl_ddr_dimm_params.h>
|
|
#include "ddr.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
|
|
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
|
|
ulong ddr_freq;
|
|
int slot;
|
|
|
|
if (ctrl_num > 2) {
|
|
printf("Not supported controller number %d\n", ctrl_num);
|
|
return;
|
|
}
|
|
|
|
for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
|
|
if (pdimm[slot].n_ranks)
|
|
break;
|
|
}
|
|
|
|
if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
|
|
return;
|
|
|
|
/*
|
|
* we use identical timing for all slots. If needed, change the code
|
|
* to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
|
|
*/
|
|
if (popts->registered_dimm_en)
|
|
pbsp = rdimms[ctrl_num];
|
|
else
|
|
pbsp = udimms[ctrl_num];
|
|
|
|
|
|
/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
|
|
* freqency and n_banks specified in board_specific_parameters table.
|
|
*/
|
|
ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
|
|
while (pbsp->datarate_mhz_high) {
|
|
if (pbsp->n_ranks == pdimm[slot].n_ranks &&
|
|
(pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
|
|
if (ddr_freq <= pbsp->datarate_mhz_high) {
|
|
popts->clk_adjust = pbsp->clk_adjust;
|
|
popts->wrlvl_start = pbsp->wrlvl_start;
|
|
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
|
|
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
|
|
goto found;
|
|
}
|
|
pbsp_highest = pbsp;
|
|
}
|
|
pbsp++;
|
|
}
|
|
|
|
if (pbsp_highest) {
|
|
printf("Error: board specific timing not found for data rate %lu MT/s\n"
|
|
"Trying to use the highest speed (%u) parameters\n",
|
|
ddr_freq, pbsp_highest->datarate_mhz_high);
|
|
popts->clk_adjust = pbsp_highest->clk_adjust;
|
|
popts->wrlvl_start = pbsp_highest->wrlvl_start;
|
|
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
|
|
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
|
|
} else {
|
|
panic("DIMM is not supported by this board");
|
|
}
|
|
found:
|
|
debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
|
|
"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
|
|
pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
|
|
pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
|
|
pbsp->wrlvl_ctl_3);
|
|
|
|
if (ctrl_num == CONFIG_DP_DDR_CTRL) {
|
|
/* force DDR bus width to 32 bits */
|
|
popts->data_bus_width = 1;
|
|
popts->otf_burst_chop_en = 0;
|
|
popts->burst_length = DDR_BL8;
|
|
popts->bstopre = 0; /* enable auto precharge */
|
|
/*
|
|
* Layout optimization results byte mapping
|
|
* Byte 0 -> Byte ECC
|
|
* Byte 1 -> Byte 3
|
|
* Byte 2 -> Byte 2
|
|
* Byte 3 -> Byte 1
|
|
* Byte ECC -> Byte 0
|
|
*/
|
|
dq_mapping_0 = pdimm[slot].dq_mapping[0];
|
|
dq_mapping_2 = pdimm[slot].dq_mapping[2];
|
|
dq_mapping_3 = pdimm[slot].dq_mapping[3];
|
|
pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
|
|
pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
|
|
pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
|
|
pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
|
|
pdimm[slot].dq_mapping[6] = dq_mapping_2;
|
|
pdimm[slot].dq_mapping[7] = dq_mapping_3;
|
|
pdimm[slot].dq_mapping[8] = dq_mapping_0;
|
|
pdimm[slot].dq_mapping[9] = 0;
|
|
pdimm[slot].dq_mapping[10] = 0;
|
|
pdimm[slot].dq_mapping[11] = 0;
|
|
pdimm[slot].dq_mapping[12] = 0;
|
|
pdimm[slot].dq_mapping[13] = 0;
|
|
pdimm[slot].dq_mapping[14] = 0;
|
|
pdimm[slot].dq_mapping[15] = 0;
|
|
pdimm[slot].dq_mapping[16] = 0;
|
|
pdimm[slot].dq_mapping[17] = 0;
|
|
}
|
|
/* To work at higher than 1333MT/s */
|
|
popts->half_strength_driver_enable = 0;
|
|
/*
|
|
* Write leveling override
|
|
*/
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0x0; /* 32 clocks */
|
|
|
|
/*
|
|
* Rtt and Rtt_WR override
|
|
*/
|
|
popts->rtt_override = 0;
|
|
|
|
/* Enable ZQ calibration */
|
|
popts->zq_en = 1;
|
|
|
|
if (ddr_freq < 2350) {
|
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
|
|
DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
|
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
|
|
DDR_CDR2_VREF_RANGE_2;
|
|
} else {
|
|
popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
|
|
DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
|
|
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
|
|
DDR_CDR2_VREF_RANGE_2;
|
|
}
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
phys_size_t dram_size;
|
|
|
|
puts("Initializing DDR....using SPD\n");
|
|
|
|
dram_size = fsl_ddr_sdram();
|
|
|
|
return dram_size;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
|
|
phys_size_t dp_ddr_size;
|
|
#endif
|
|
|
|
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
|
|
if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) {
|
|
gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
|
|
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
|
|
gd->bd->bi_dram[1].size = gd->ram_size -
|
|
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
|
|
} else {
|
|
gd->bd->bi_dram[0].size = gd->ram_size;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
|
|
/* initialize DP-DDR here */
|
|
puts("DP-DDR: ");
|
|
/*
|
|
* DDR controller use 0 as the base address for binding.
|
|
* It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
|
|
*/
|
|
dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
|
|
CONFIG_DP_DDR_CTRL,
|
|
CONFIG_DP_DDR_NUM_CTRLS,
|
|
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
|
|
NULL, NULL, NULL);
|
|
if (dp_ddr_size) {
|
|
gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
|
|
gd->bd->bi_dram[2].size = dp_ddr_size;
|
|
} else {
|
|
puts("Not detected");
|
|
}
|
|
#endif
|
|
}
|