mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1678 lines
46 KiB
C
1678 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*-
|
|
* Copyright (c) 2007-2008, Juniper Networks, Inc.
|
|
* Copyright (c) 2008, Excito Elektronik i Skåne AB
|
|
* Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
|
|
*
|
|
* All rights reserved.
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/unaligned.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <watchdog.h>
|
|
#include <linux/compiler.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
|
|
#endif
|
|
|
|
/*
|
|
* EHCI spec page 20 says that the HC may take up to 16 uFrames (= 4ms) to halt.
|
|
* Let's time out after 8 to have a little safety margin on top of that.
|
|
*/
|
|
#define HCHALT_TIMEOUT (8 * 1000)
|
|
|
|
#ifndef CONFIG_DM_USB
|
|
static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT];
|
|
#endif
|
|
|
|
#define ALIGN_END_ADDR(type, ptr, size) \
|
|
((unsigned long)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN))
|
|
|
|
static struct descriptor {
|
|
struct usb_hub_descriptor hub;
|
|
struct usb_device_descriptor device;
|
|
struct usb_linux_config_descriptor config;
|
|
struct usb_linux_interface_descriptor interface;
|
|
struct usb_endpoint_descriptor endpoint;
|
|
} __attribute__ ((packed)) descriptor = {
|
|
{
|
|
0x8, /* bDescLength */
|
|
0x29, /* bDescriptorType: hub descriptor */
|
|
2, /* bNrPorts -- runtime modified */
|
|
0, /* wHubCharacteristics */
|
|
10, /* bPwrOn2PwrGood */
|
|
0, /* bHubCntrCurrent */
|
|
{ /* Device removable */
|
|
} /* at most 7 ports! XXX */
|
|
},
|
|
{
|
|
0x12, /* bLength */
|
|
1, /* bDescriptorType: UDESC_DEVICE */
|
|
cpu_to_le16(0x0200), /* bcdUSB: v2.0 */
|
|
9, /* bDeviceClass: UDCLASS_HUB */
|
|
0, /* bDeviceSubClass: UDSUBCLASS_HUB */
|
|
1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */
|
|
64, /* bMaxPacketSize: 64 bytes */
|
|
0x0000, /* idVendor */
|
|
0x0000, /* idProduct */
|
|
cpu_to_le16(0x0100), /* bcdDevice */
|
|
1, /* iManufacturer */
|
|
2, /* iProduct */
|
|
0, /* iSerialNumber */
|
|
1 /* bNumConfigurations: 1 */
|
|
},
|
|
{
|
|
0x9,
|
|
2, /* bDescriptorType: UDESC_CONFIG */
|
|
cpu_to_le16(0x19),
|
|
1, /* bNumInterface */
|
|
1, /* bConfigurationValue */
|
|
0, /* iConfiguration */
|
|
0x40, /* bmAttributes: UC_SELF_POWER */
|
|
0 /* bMaxPower */
|
|
},
|
|
{
|
|
0x9, /* bLength */
|
|
4, /* bDescriptorType: UDESC_INTERFACE */
|
|
0, /* bInterfaceNumber */
|
|
0, /* bAlternateSetting */
|
|
1, /* bNumEndpoints */
|
|
9, /* bInterfaceClass: UICLASS_HUB */
|
|
0, /* bInterfaceSubClass: UISUBCLASS_HUB */
|
|
0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */
|
|
0 /* iInterface */
|
|
},
|
|
{
|
|
0x7, /* bLength */
|
|
5, /* bDescriptorType: UDESC_ENDPOINT */
|
|
0x81, /* bEndpointAddress:
|
|
* UE_DIR_IN | EHCI_INTR_ENDPT
|
|
*/
|
|
3, /* bmAttributes: UE_INTERRUPT */
|
|
8, /* wMaxPacketSize */
|
|
255 /* bInterval */
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_EHCI_IS_TDI)
|
|
#define ehci_is_TDI() (1)
|
|
#else
|
|
#define ehci_is_TDI() (0)
|
|
#endif
|
|
|
|
static struct ehci_ctrl *ehci_get_ctrl(struct usb_device *udev)
|
|
{
|
|
#ifdef CONFIG_DM_USB
|
|
return dev_get_priv(usb_get_bus(udev->dev));
|
|
#else
|
|
return udev->controller;
|
|
#endif
|
|
}
|
|
|
|
static int ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg)
|
|
{
|
|
return PORTSC_PSPD(reg);
|
|
}
|
|
|
|
static void ehci_set_usbmode(struct ehci_ctrl *ctrl)
|
|
{
|
|
uint32_t tmp;
|
|
uint32_t *reg_ptr;
|
|
|
|
reg_ptr = (uint32_t *)((u8 *)&ctrl->hcor->or_usbcmd + USBMODE);
|
|
tmp = ehci_readl(reg_ptr);
|
|
tmp |= USBMODE_CM_HC;
|
|
#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
|
|
tmp |= USBMODE_BE;
|
|
#else
|
|
tmp &= ~USBMODE_BE;
|
|
#endif
|
|
ehci_writel(reg_ptr, tmp);
|
|
}
|
|
|
|
static void ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
|
|
uint32_t *reg)
|
|
{
|
|
mdelay(50);
|
|
}
|
|
|
|
static uint32_t *ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
|
|
{
|
|
int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
|
|
|
|
if (port < 0 || port >= max_ports) {
|
|
/* Printing the message would cause a scan failure! */
|
|
debug("The request port(%u) exceeds maximum port number\n",
|
|
port);
|
|
return NULL;
|
|
}
|
|
|
|
return (uint32_t *)&ctrl->hcor->or_portsc[port];
|
|
}
|
|
|
|
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
|
|
{
|
|
uint32_t result;
|
|
do {
|
|
result = ehci_readl(ptr);
|
|
udelay(5);
|
|
if (result == ~(uint32_t)0)
|
|
return -1;
|
|
result &= mask;
|
|
if (result == done)
|
|
return 0;
|
|
usec--;
|
|
} while (usec > 0);
|
|
return -1;
|
|
}
|
|
|
|
static int ehci_reset(struct ehci_ctrl *ctrl)
|
|
{
|
|
uint32_t cmd;
|
|
int ret = 0;
|
|
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
cmd = (cmd & ~CMD_RUN) | CMD_RESET;
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
ret = handshake((uint32_t *)&ctrl->hcor->or_usbcmd,
|
|
CMD_RESET, 0, 250 * 1000);
|
|
if (ret < 0) {
|
|
printf("EHCI fail to reset\n");
|
|
goto out;
|
|
}
|
|
|
|
if (ehci_is_TDI())
|
|
ctrl->ops.set_usb_mode(ctrl);
|
|
|
|
#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
|
|
cmd = ehci_readl(&ctrl->hcor->or_txfilltuning);
|
|
cmd &= ~TXFIFO_THRESH_MASK;
|
|
cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH);
|
|
ehci_writel(&ctrl->hcor->or_txfilltuning, cmd);
|
|
#endif
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_shutdown(struct ehci_ctrl *ctrl)
|
|
{
|
|
int i, ret = 0;
|
|
uint32_t cmd, reg;
|
|
int max_ports = HCS_N_PORTS(ehci_readl(&ctrl->hccr->cr_hcsparams));
|
|
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
/* If not run, directly return */
|
|
if (!(cmd & CMD_RUN))
|
|
return 0;
|
|
cmd &= ~(CMD_PSE | CMD_ASE);
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
ret = handshake(&ctrl->hcor->or_usbsts, STS_ASS | STS_PSS, 0,
|
|
100 * 1000);
|
|
|
|
if (!ret) {
|
|
for (i = 0; i < max_ports; i++) {
|
|
reg = ehci_readl(&ctrl->hcor->or_portsc[i]);
|
|
reg |= EHCI_PS_SUSP;
|
|
ehci_writel(&ctrl->hcor->or_portsc[i], reg);
|
|
}
|
|
|
|
cmd &= ~CMD_RUN;
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
ret = handshake(&ctrl->hcor->or_usbsts, STS_HALT, STS_HALT,
|
|
HCHALT_TIMEOUT);
|
|
}
|
|
|
|
if (ret)
|
|
puts("EHCI failed to shut down host controller.\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz)
|
|
{
|
|
uint32_t delta, next;
|
|
unsigned long addr = (unsigned long)buf;
|
|
int idx;
|
|
|
|
if (addr != ALIGN(addr, ARCH_DMA_MINALIGN))
|
|
debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf);
|
|
|
|
flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN));
|
|
|
|
idx = 0;
|
|
while (idx < QT_BUFFER_CNT) {
|
|
td->qt_buffer[idx] = cpu_to_hc32(virt_to_phys((void *)addr));
|
|
td->qt_buffer_hi[idx] = 0;
|
|
next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1);
|
|
delta = next - addr;
|
|
if (delta >= sz)
|
|
break;
|
|
sz -= delta;
|
|
addr = next;
|
|
idx++;
|
|
}
|
|
|
|
if (idx == QT_BUFFER_CNT) {
|
|
printf("out of buffer pointers (%zu bytes left)\n", sz);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 ehci_encode_speed(enum usb_device_speed speed)
|
|
{
|
|
#define QH_HIGH_SPEED 2
|
|
#define QH_FULL_SPEED 0
|
|
#define QH_LOW_SPEED 1
|
|
if (speed == USB_SPEED_HIGH)
|
|
return QH_HIGH_SPEED;
|
|
if (speed == USB_SPEED_LOW)
|
|
return QH_LOW_SPEED;
|
|
return QH_FULL_SPEED;
|
|
}
|
|
|
|
static void ehci_update_endpt2_dev_n_port(struct usb_device *udev,
|
|
struct QH *qh)
|
|
{
|
|
uint8_t portnr = 0;
|
|
uint8_t hubaddr = 0;
|
|
|
|
if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL)
|
|
return;
|
|
|
|
usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr);
|
|
|
|
qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) |
|
|
QH_ENDPT2_HUBADDR(hubaddr));
|
|
}
|
|
|
|
static int
|
|
ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
|
|
int length, struct devrequest *req)
|
|
{
|
|
ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN);
|
|
struct qTD *qtd;
|
|
int qtd_count = 0;
|
|
int qtd_counter = 0;
|
|
volatile struct qTD *vtd;
|
|
unsigned long ts;
|
|
uint32_t *tdp;
|
|
uint32_t endpt, maxpacket, token, usbsts;
|
|
uint32_t c, toggle;
|
|
uint32_t cmd;
|
|
int timeout;
|
|
int ret = 0;
|
|
struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
|
|
|
|
debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe,
|
|
buffer, length, req);
|
|
if (req != NULL)
|
|
debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n",
|
|
req->request, req->request,
|
|
req->requesttype, req->requesttype,
|
|
le16_to_cpu(req->value), le16_to_cpu(req->value),
|
|
le16_to_cpu(req->index));
|
|
|
|
#define PKT_ALIGN 512
|
|
/*
|
|
* The USB transfer is split into qTD transfers. Eeach qTD transfer is
|
|
* described by a transfer descriptor (the qTD). The qTDs form a linked
|
|
* list with a queue head (QH).
|
|
*
|
|
* Each qTD transfer starts with a new USB packet, i.e. a packet cannot
|
|
* have its beginning in a qTD transfer and its end in the following
|
|
* one, so the qTD transfer lengths have to be chosen accordingly.
|
|
*
|
|
* Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to
|
|
* single pages. The first data buffer can start at any offset within a
|
|
* page (not considering the cache-line alignment issues), while the
|
|
* following buffers must be page-aligned. There is no alignment
|
|
* constraint on the size of a qTD transfer.
|
|
*/
|
|
if (req != NULL)
|
|
/* 1 qTD will be needed for SETUP, and 1 for ACK. */
|
|
qtd_count += 1 + 1;
|
|
if (length > 0 || req == NULL) {
|
|
/*
|
|
* Determine the qTD transfer size that will be used for the
|
|
* data payload (not considering the first qTD transfer, which
|
|
* may be longer or shorter, and the final one, which may be
|
|
* shorter).
|
|
*
|
|
* In order to keep each packet within a qTD transfer, the qTD
|
|
* transfer size is aligned to PKT_ALIGN, which is a multiple of
|
|
* wMaxPacketSize (except in some cases for interrupt transfers,
|
|
* see comment in submit_int_msg()).
|
|
*
|
|
* By default, i.e. if the input buffer is aligned to PKT_ALIGN,
|
|
* QT_BUFFER_CNT full pages will be used.
|
|
*/
|
|
int xfr_sz = QT_BUFFER_CNT;
|
|
/*
|
|
* However, if the input buffer is not aligned to PKT_ALIGN, the
|
|
* qTD transfer size will be one page shorter, and the first qTD
|
|
* data buffer of each transfer will be page-unaligned.
|
|
*/
|
|
if ((unsigned long)buffer & (PKT_ALIGN - 1))
|
|
xfr_sz--;
|
|
/* Convert the qTD transfer size to bytes. */
|
|
xfr_sz *= EHCI_PAGE_SIZE;
|
|
/*
|
|
* Approximate by excess the number of qTDs that will be
|
|
* required for the data payload. The exact formula is way more
|
|
* complicated and saves at most 2 qTDs, i.e. a total of 128
|
|
* bytes.
|
|
*/
|
|
qtd_count += 2 + length / xfr_sz;
|
|
}
|
|
/*
|
|
* Threshold value based on the worst-case total size of the allocated qTDs for
|
|
* a mass-storage transfer of 65535 blocks of 512 bytes.
|
|
*/
|
|
#if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024
|
|
#warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI
|
|
#endif
|
|
qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD));
|
|
if (qtd == NULL) {
|
|
printf("unable to allocate TDs\n");
|
|
return -1;
|
|
}
|
|
|
|
memset(qh, 0, sizeof(struct QH));
|
|
memset(qtd, 0, qtd_count * sizeof(*qtd));
|
|
|
|
toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
|
|
|
|
/*
|
|
* Setup QH (3.6 in ehci-r10.pdf)
|
|
*
|
|
* qh_link ................. 03-00 H
|
|
* qh_endpt1 ............... 07-04 H
|
|
* qh_endpt2 ............... 0B-08 H
|
|
* - qh_curtd
|
|
* qh_overlay.qt_next ...... 13-10 H
|
|
* - qh_overlay.qt_altnext
|
|
*/
|
|
qh->qh_link = cpu_to_hc32(virt_to_phys(&ctrl->qh_list) | QH_LINK_TYPE_QH);
|
|
c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe);
|
|
maxpacket = usb_maxpacket(dev, pipe);
|
|
endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) |
|
|
QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) |
|
|
QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) |
|
|
QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
|
|
QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) |
|
|
QH_ENDPT1_DEVADDR(usb_pipedevice(pipe));
|
|
qh->qh_endpt1 = cpu_to_hc32(endpt);
|
|
endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0);
|
|
qh->qh_endpt2 = cpu_to_hc32(endpt);
|
|
ehci_update_endpt2_dev_n_port(dev, qh);
|
|
qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
|
|
tdp = &qh->qh_overlay.qt_next;
|
|
if (req != NULL) {
|
|
/*
|
|
* Setup request qTD (3.5 in ehci-r10.pdf)
|
|
*
|
|
* qt_next ................ 03-00 H
|
|
* qt_altnext ............. 07-04 H
|
|
* qt_token ............... 0B-08 H
|
|
*
|
|
* [ buffer, buffer_hi ] loaded with "req".
|
|
*/
|
|
qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) |
|
|
QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
|
|
QT_TOKEN_PID(QT_TOKEN_PID_SETUP) |
|
|
QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
|
|
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
|
|
if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) {
|
|
printf("unable to construct SETUP TD\n");
|
|
goto fail;
|
|
}
|
|
/* Update previous qTD! */
|
|
*tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
|
|
tdp = &qtd[qtd_counter++].qt_next;
|
|
toggle = 1;
|
|
}
|
|
|
|
if (length > 0 || req == NULL) {
|
|
uint8_t *buf_ptr = buffer;
|
|
int left_length = length;
|
|
|
|
do {
|
|
/*
|
|
* Determine the size of this qTD transfer. By default,
|
|
* QT_BUFFER_CNT full pages can be used.
|
|
*/
|
|
int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE;
|
|
/*
|
|
* However, if the input buffer is not page-aligned, the
|
|
* portion of the first page before the buffer start
|
|
* offset within that page is unusable.
|
|
*/
|
|
xfr_bytes -= (unsigned long)buf_ptr & (EHCI_PAGE_SIZE - 1);
|
|
/*
|
|
* In order to keep each packet within a qTD transfer,
|
|
* align the qTD transfer size to PKT_ALIGN.
|
|
*/
|
|
xfr_bytes &= ~(PKT_ALIGN - 1);
|
|
/*
|
|
* This transfer may be shorter than the available qTD
|
|
* transfer size that has just been computed.
|
|
*/
|
|
xfr_bytes = min(xfr_bytes, left_length);
|
|
|
|
/*
|
|
* Setup request qTD (3.5 in ehci-r10.pdf)
|
|
*
|
|
* qt_next ................ 03-00 H
|
|
* qt_altnext ............. 07-04 H
|
|
* qt_token ............... 0B-08 H
|
|
*
|
|
* [ buffer, buffer_hi ] loaded with "buffer".
|
|
*/
|
|
qtd[qtd_counter].qt_next =
|
|
cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qtd[qtd_counter].qt_altnext =
|
|
cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
token = QT_TOKEN_DT(toggle) |
|
|
QT_TOKEN_TOTALBYTES(xfr_bytes) |
|
|
QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) |
|
|
QT_TOKEN_CERR(3) |
|
|
QT_TOKEN_PID(usb_pipein(pipe) ?
|
|
QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) |
|
|
QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
|
|
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
|
|
if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr,
|
|
xfr_bytes)) {
|
|
printf("unable to construct DATA TD\n");
|
|
goto fail;
|
|
}
|
|
/* Update previous qTD! */
|
|
*tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
|
|
tdp = &qtd[qtd_counter++].qt_next;
|
|
/*
|
|
* Data toggle has to be adjusted since the qTD transfer
|
|
* size is not always an even multiple of
|
|
* wMaxPacketSize.
|
|
*/
|
|
if ((xfr_bytes / maxpacket) & 1)
|
|
toggle ^= 1;
|
|
buf_ptr += xfr_bytes;
|
|
left_length -= xfr_bytes;
|
|
} while (left_length > 0);
|
|
}
|
|
|
|
if (req != NULL) {
|
|
/*
|
|
* Setup request qTD (3.5 in ehci-r10.pdf)
|
|
*
|
|
* qt_next ................ 03-00 H
|
|
* qt_altnext ............. 07-04 H
|
|
* qt_token ............... 0B-08 H
|
|
*/
|
|
qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) |
|
|
QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) |
|
|
QT_TOKEN_PID(usb_pipein(pipe) ?
|
|
QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) |
|
|
QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE);
|
|
qtd[qtd_counter].qt_token = cpu_to_hc32(token);
|
|
/* Update previous qTD! */
|
|
*tdp = cpu_to_hc32(virt_to_phys(&qtd[qtd_counter]));
|
|
tdp = &qtd[qtd_counter++].qt_next;
|
|
}
|
|
|
|
ctrl->qh_list.qh_link = cpu_to_hc32(virt_to_phys(qh) | QH_LINK_TYPE_QH);
|
|
|
|
/* Flush dcache */
|
|
flush_dcache_range((unsigned long)&ctrl->qh_list,
|
|
ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1));
|
|
flush_dcache_range((unsigned long)qh, ALIGN_END_ADDR(struct QH, qh, 1));
|
|
flush_dcache_range((unsigned long)qtd,
|
|
ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
|
|
|
|
/* Set async. queue head pointer. */
|
|
ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(&ctrl->qh_list));
|
|
|
|
usbsts = ehci_readl(&ctrl->hcor->or_usbsts);
|
|
ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f));
|
|
|
|
/* Enable async. schedule. */
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
cmd |= CMD_ASE;
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
|
|
ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS,
|
|
100 * 1000);
|
|
if (ret < 0) {
|
|
printf("EHCI fail timeout STS_ASS set\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Wait for TDs to be processed. */
|
|
ts = get_timer(0);
|
|
vtd = &qtd[qtd_counter - 1];
|
|
timeout = USB_TIMEOUT_MS(pipe);
|
|
do {
|
|
/* Invalidate dcache */
|
|
invalidate_dcache_range((unsigned long)&ctrl->qh_list,
|
|
ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1));
|
|
invalidate_dcache_range((unsigned long)qh,
|
|
ALIGN_END_ADDR(struct QH, qh, 1));
|
|
invalidate_dcache_range((unsigned long)qtd,
|
|
ALIGN_END_ADDR(struct qTD, qtd, qtd_count));
|
|
|
|
token = hc32_to_cpu(vtd->qt_token);
|
|
if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE))
|
|
break;
|
|
WATCHDOG_RESET();
|
|
} while (get_timer(ts) < timeout);
|
|
|
|
/*
|
|
* Invalidate the memory area occupied by buffer
|
|
* Don't try to fix the buffer alignment, if it isn't properly
|
|
* aligned it's upper layer's fault so let invalidate_dcache_range()
|
|
* vow about it. But we have to fix the length as it's actual
|
|
* transfer length and can be unaligned. This is potentially
|
|
* dangerous operation, it's responsibility of the calling
|
|
* code to make sure enough space is reserved.
|
|
*/
|
|
if (buffer != NULL && length > 0)
|
|
invalidate_dcache_range((unsigned long)buffer,
|
|
ALIGN((unsigned long)buffer + length, ARCH_DMA_MINALIGN));
|
|
|
|
/* Check that the TD processing happened */
|
|
if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)
|
|
printf("EHCI timed out on TD - token=%#x\n", token);
|
|
|
|
/* Disable async schedule. */
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
cmd &= ~CMD_ASE;
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
|
|
ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0,
|
|
100 * 1000);
|
|
if (ret < 0) {
|
|
printf("EHCI fail timeout STS_ASS reset\n");
|
|
goto fail;
|
|
}
|
|
|
|
token = hc32_to_cpu(qh->qh_overlay.qt_token);
|
|
if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) {
|
|
debug("TOKEN=%#x\n", token);
|
|
switch (QT_TOKEN_GET_STATUS(token) &
|
|
~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) {
|
|
case 0:
|
|
toggle = QT_TOKEN_GET_DT(token);
|
|
usb_settoggle(dev, usb_pipeendpoint(pipe),
|
|
usb_pipeout(pipe), toggle);
|
|
dev->status = 0;
|
|
break;
|
|
case QT_TOKEN_STATUS_HALTED:
|
|
dev->status = USB_ST_STALLED;
|
|
break;
|
|
case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR:
|
|
case QT_TOKEN_STATUS_DATBUFERR:
|
|
dev->status = USB_ST_BUF_ERR;
|
|
break;
|
|
case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET:
|
|
case QT_TOKEN_STATUS_BABBLEDET:
|
|
dev->status = USB_ST_BABBLE_DET;
|
|
break;
|
|
default:
|
|
dev->status = USB_ST_CRC_ERR;
|
|
if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED)
|
|
dev->status |= USB_ST_STALLED;
|
|
break;
|
|
}
|
|
dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
|
|
} else {
|
|
dev->act_len = 0;
|
|
#ifndef CONFIG_USB_EHCI_FARADAY
|
|
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
|
|
dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
|
|
ehci_readl(&ctrl->hcor->or_portsc[0]),
|
|
ehci_readl(&ctrl->hcor->or_portsc[1]));
|
|
#endif
|
|
}
|
|
|
|
free(qtd);
|
|
return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
|
|
|
|
fail:
|
|
free(qtd);
|
|
return -1;
|
|
}
|
|
|
|
static int ehci_submit_root(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length, struct devrequest *req)
|
|
{
|
|
uint8_t tmpbuf[4];
|
|
u16 typeReq;
|
|
void *srcptr = NULL;
|
|
int len, srclen;
|
|
uint32_t reg;
|
|
uint32_t *status_reg;
|
|
int port = le16_to_cpu(req->index) & 0xff;
|
|
struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
|
|
|
|
srclen = 0;
|
|
|
|
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
|
|
req->request, req->request,
|
|
req->requesttype, req->requesttype,
|
|
le16_to_cpu(req->value), le16_to_cpu(req->index));
|
|
|
|
typeReq = req->request | req->requesttype << 8;
|
|
|
|
switch (typeReq) {
|
|
case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
|
|
case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
|
|
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
|
|
status_reg = ctrl->ops.get_portsc_register(ctrl, port - 1);
|
|
if (!status_reg)
|
|
return -1;
|
|
break;
|
|
default:
|
|
status_reg = NULL;
|
|
break;
|
|
}
|
|
|
|
switch (typeReq) {
|
|
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
|
|
switch (le16_to_cpu(req->value) >> 8) {
|
|
case USB_DT_DEVICE:
|
|
debug("USB_DT_DEVICE request\n");
|
|
srcptr = &descriptor.device;
|
|
srclen = descriptor.device.bLength;
|
|
break;
|
|
case USB_DT_CONFIG:
|
|
debug("USB_DT_CONFIG config\n");
|
|
srcptr = &descriptor.config;
|
|
srclen = descriptor.config.bLength +
|
|
descriptor.interface.bLength +
|
|
descriptor.endpoint.bLength;
|
|
break;
|
|
case USB_DT_STRING:
|
|
debug("USB_DT_STRING config\n");
|
|
switch (le16_to_cpu(req->value) & 0xff) {
|
|
case 0: /* Language */
|
|
srcptr = "\4\3\1\0";
|
|
srclen = 4;
|
|
break;
|
|
case 1: /* Vendor */
|
|
srcptr = "\16\3u\0-\0b\0o\0o\0t\0";
|
|
srclen = 14;
|
|
break;
|
|
case 2: /* Product */
|
|
srcptr = "\52\3E\0H\0C\0I\0 "
|
|
"\0H\0o\0s\0t\0 "
|
|
"\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0";
|
|
srclen = 42;
|
|
break;
|
|
default:
|
|
debug("unknown value DT_STRING %x\n",
|
|
le16_to_cpu(req->value));
|
|
goto unknown;
|
|
}
|
|
break;
|
|
default:
|
|
debug("unknown value %x\n", le16_to_cpu(req->value));
|
|
goto unknown;
|
|
}
|
|
break;
|
|
case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8):
|
|
switch (le16_to_cpu(req->value) >> 8) {
|
|
case USB_DT_HUB:
|
|
debug("USB_DT_HUB config\n");
|
|
srcptr = &descriptor.hub;
|
|
srclen = descriptor.hub.bLength;
|
|
break;
|
|
default:
|
|
debug("unknown value %x\n", le16_to_cpu(req->value));
|
|
goto unknown;
|
|
}
|
|
break;
|
|
case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8):
|
|
debug("USB_REQ_SET_ADDRESS\n");
|
|
ctrl->rootdev = le16_to_cpu(req->value);
|
|
break;
|
|
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
|
|
debug("USB_REQ_SET_CONFIGURATION\n");
|
|
/* Nothing to do */
|
|
break;
|
|
case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8):
|
|
tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */
|
|
tmpbuf[1] = 0;
|
|
srcptr = tmpbuf;
|
|
srclen = 2;
|
|
break;
|
|
case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
|
|
memset(tmpbuf, 0, 4);
|
|
reg = ehci_readl(status_reg);
|
|
if (reg & EHCI_PS_CS)
|
|
tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
|
|
if (reg & EHCI_PS_PE)
|
|
tmpbuf[0] |= USB_PORT_STAT_ENABLE;
|
|
if (reg & EHCI_PS_SUSP)
|
|
tmpbuf[0] |= USB_PORT_STAT_SUSPEND;
|
|
if (reg & EHCI_PS_OCA)
|
|
tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT;
|
|
if (reg & EHCI_PS_PR)
|
|
tmpbuf[0] |= USB_PORT_STAT_RESET;
|
|
if (reg & EHCI_PS_PP)
|
|
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
|
|
|
|
if (ehci_is_TDI()) {
|
|
switch (ctrl->ops.get_port_speed(ctrl, reg)) {
|
|
case PORTSC_PSPD_FS:
|
|
break;
|
|
case PORTSC_PSPD_LS:
|
|
tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8;
|
|
break;
|
|
case PORTSC_PSPD_HS:
|
|
default:
|
|
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
|
|
break;
|
|
}
|
|
} else {
|
|
tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8;
|
|
}
|
|
|
|
if (reg & EHCI_PS_CSC)
|
|
tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION;
|
|
if (reg & EHCI_PS_PEC)
|
|
tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
|
|
if (reg & EHCI_PS_OCC)
|
|
tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
|
|
if (ctrl->portreset & (1 << port))
|
|
tmpbuf[2] |= USB_PORT_STAT_C_RESET;
|
|
|
|
srcptr = tmpbuf;
|
|
srclen = 4;
|
|
break;
|
|
case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
|
|
reg = ehci_readl(status_reg);
|
|
reg &= ~EHCI_PS_CLEAR;
|
|
switch (le16_to_cpu(req->value)) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
reg |= EHCI_PS_PE;
|
|
ehci_writel(status_reg, reg);
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) {
|
|
reg |= EHCI_PS_PP;
|
|
ehci_writel(status_reg, reg);
|
|
}
|
|
break;
|
|
case USB_PORT_FEAT_RESET:
|
|
if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS &&
|
|
!ehci_is_TDI() &&
|
|
EHCI_PS_IS_LOWSPEED(reg)) {
|
|
/* Low speed device, give up ownership. */
|
|
debug("port %d low speed --> companion\n",
|
|
port - 1);
|
|
reg |= EHCI_PS_PO;
|
|
ehci_writel(status_reg, reg);
|
|
return -ENXIO;
|
|
} else {
|
|
int ret;
|
|
|
|
reg |= EHCI_PS_PR;
|
|
reg &= ~EHCI_PS_PE;
|
|
ehci_writel(status_reg, reg);
|
|
/*
|
|
* caller must wait, then call GetPortStatus
|
|
* usb 2.0 specification say 50 ms resets on
|
|
* root
|
|
*/
|
|
ctrl->ops.powerup_fixup(ctrl, status_reg, ®);
|
|
|
|
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
|
|
/*
|
|
* A host controller must terminate the reset
|
|
* and stabilize the state of the port within
|
|
* 2 milliseconds
|
|
*/
|
|
ret = handshake(status_reg, EHCI_PS_PR, 0,
|
|
2 * 1000);
|
|
if (!ret) {
|
|
reg = ehci_readl(status_reg);
|
|
if ((reg & (EHCI_PS_PE | EHCI_PS_CS))
|
|
== EHCI_PS_CS && !ehci_is_TDI()) {
|
|
debug("port %d full speed --> companion\n", port - 1);
|
|
reg &= ~EHCI_PS_CLEAR;
|
|
reg |= EHCI_PS_PO;
|
|
ehci_writel(status_reg, reg);
|
|
return -ENXIO;
|
|
} else {
|
|
ctrl->portreset |= 1 << port;
|
|
}
|
|
} else {
|
|
printf("port(%d) reset error\n",
|
|
port - 1);
|
|
}
|
|
}
|
|
break;
|
|
case USB_PORT_FEAT_TEST:
|
|
ehci_shutdown(ctrl);
|
|
reg &= ~(0xf << 16);
|
|
reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16;
|
|
ehci_writel(status_reg, reg);
|
|
break;
|
|
default:
|
|
debug("unknown feature %x\n", le16_to_cpu(req->value));
|
|
goto unknown;
|
|
}
|
|
/* unblock posted writes */
|
|
(void) ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
break;
|
|
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
|
|
reg = ehci_readl(status_reg);
|
|
reg &= ~EHCI_PS_CLEAR;
|
|
switch (le16_to_cpu(req->value)) {
|
|
case USB_PORT_FEAT_ENABLE:
|
|
reg &= ~EHCI_PS_PE;
|
|
break;
|
|
case USB_PORT_FEAT_C_ENABLE:
|
|
reg |= EHCI_PS_PE;
|
|
break;
|
|
case USB_PORT_FEAT_POWER:
|
|
if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams)))
|
|
reg &= ~EHCI_PS_PP;
|
|
break;
|
|
case USB_PORT_FEAT_C_CONNECTION:
|
|
reg |= EHCI_PS_CSC;
|
|
break;
|
|
case USB_PORT_FEAT_OVER_CURRENT:
|
|
reg |= EHCI_PS_OCC;
|
|
break;
|
|
case USB_PORT_FEAT_C_RESET:
|
|
ctrl->portreset &= ~(1 << port);
|
|
break;
|
|
default:
|
|
debug("unknown feature %x\n", le16_to_cpu(req->value));
|
|
goto unknown;
|
|
}
|
|
ehci_writel(status_reg, reg);
|
|
/* unblock posted write */
|
|
(void) ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
break;
|
|
default:
|
|
debug("Unknown request\n");
|
|
goto unknown;
|
|
}
|
|
|
|
mdelay(1);
|
|
len = min3(srclen, (int)le16_to_cpu(req->length), length);
|
|
if (srcptr != NULL && len > 0)
|
|
memcpy(buffer, srcptr, len);
|
|
else
|
|
debug("Len is 0\n");
|
|
|
|
dev->act_len = len;
|
|
dev->status = 0;
|
|
return 0;
|
|
|
|
unknown:
|
|
debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n",
|
|
req->requesttype, req->request, le16_to_cpu(req->value),
|
|
le16_to_cpu(req->index), le16_to_cpu(req->length));
|
|
|
|
dev->act_len = 0;
|
|
dev->status = USB_ST_STALLED;
|
|
return -1;
|
|
}
|
|
|
|
static const struct ehci_ops default_ehci_ops = {
|
|
.set_usb_mode = ehci_set_usbmode,
|
|
.get_port_speed = ehci_get_port_speed,
|
|
.powerup_fixup = ehci_powerup_fixup,
|
|
.get_portsc_register = ehci_get_portsc_register,
|
|
};
|
|
|
|
static void ehci_setup_ops(struct ehci_ctrl *ctrl, const struct ehci_ops *ops)
|
|
{
|
|
if (!ops) {
|
|
ctrl->ops = default_ehci_ops;
|
|
} else {
|
|
ctrl->ops = *ops;
|
|
if (!ctrl->ops.set_usb_mode)
|
|
ctrl->ops.set_usb_mode = ehci_set_usbmode;
|
|
if (!ctrl->ops.get_port_speed)
|
|
ctrl->ops.get_port_speed = ehci_get_port_speed;
|
|
if (!ctrl->ops.powerup_fixup)
|
|
ctrl->ops.powerup_fixup = ehci_powerup_fixup;
|
|
if (!ctrl->ops.get_portsc_register)
|
|
ctrl->ops.get_portsc_register =
|
|
ehci_get_portsc_register;
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_DM_USB
|
|
void ehci_set_controller_priv(int index, void *priv, const struct ehci_ops *ops)
|
|
{
|
|
struct ehci_ctrl *ctrl = &ehcic[index];
|
|
|
|
ctrl->priv = priv;
|
|
ehci_setup_ops(ctrl, ops);
|
|
}
|
|
|
|
void *ehci_get_controller_priv(int index)
|
|
{
|
|
return ehcic[index].priv;
|
|
}
|
|
#endif
|
|
|
|
static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks)
|
|
{
|
|
struct QH *qh_list;
|
|
struct QH *periodic;
|
|
uint32_t reg;
|
|
uint32_t cmd;
|
|
int i;
|
|
|
|
/* Set the high address word (aka segment) for 64-bit controller */
|
|
if (ehci_readl(&ctrl->hccr->cr_hccparams) & 1)
|
|
ehci_writel(&ctrl->hcor->or_ctrldssegment, 0);
|
|
|
|
qh_list = &ctrl->qh_list;
|
|
|
|
/* Set head of reclaim list */
|
|
memset(qh_list, 0, sizeof(*qh_list));
|
|
qh_list->qh_link = cpu_to_hc32(virt_to_phys(qh_list) | QH_LINK_TYPE_QH);
|
|
qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
|
|
QH_ENDPT1_EPS(USB_SPEED_HIGH));
|
|
qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qh_list->qh_overlay.qt_token =
|
|
cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
|
|
|
|
flush_dcache_range((unsigned long)qh_list,
|
|
ALIGN_END_ADDR(struct QH, qh_list, 1));
|
|
|
|
/* Set async. queue head pointer. */
|
|
ehci_writel(&ctrl->hcor->or_asynclistaddr, virt_to_phys(qh_list));
|
|
|
|
/*
|
|
* Set up periodic list
|
|
* Step 1: Parent QH for all periodic transfers.
|
|
*/
|
|
ctrl->periodic_schedules = 0;
|
|
periodic = &ctrl->periodic_queue;
|
|
memset(periodic, 0, sizeof(*periodic));
|
|
periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
|
|
periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
|
|
flush_dcache_range((unsigned long)periodic,
|
|
ALIGN_END_ADDR(struct QH, periodic, 1));
|
|
|
|
/*
|
|
* Step 2: Setup frame-list: Every microframe, USB tries the same list.
|
|
* In particular, device specifications on polling frequency
|
|
* are disregarded. Keyboards seem to send NAK/NYet reliably
|
|
* when polled with an empty buffer.
|
|
*
|
|
* Split Transactions will be spread across microframes using
|
|
* S-mask and C-mask.
|
|
*/
|
|
if (ctrl->periodic_list == NULL)
|
|
ctrl->periodic_list = memalign(4096, 1024 * 4);
|
|
|
|
if (!ctrl->periodic_list)
|
|
return -ENOMEM;
|
|
for (i = 0; i < 1024; i++) {
|
|
ctrl->periodic_list[i] = cpu_to_hc32((unsigned long)periodic
|
|
| QH_LINK_TYPE_QH);
|
|
}
|
|
|
|
flush_dcache_range((unsigned long)ctrl->periodic_list,
|
|
ALIGN_END_ADDR(uint32_t, ctrl->periodic_list,
|
|
1024));
|
|
|
|
/* Set periodic list base address */
|
|
ehci_writel(&ctrl->hcor->or_periodiclistbase,
|
|
(unsigned long)ctrl->periodic_list);
|
|
|
|
reg = ehci_readl(&ctrl->hccr->cr_hcsparams);
|
|
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
|
|
debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
|
|
/* Port Indicators */
|
|
if (HCS_INDICATOR(reg))
|
|
put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
|
|
| 0x80, &descriptor.hub.wHubCharacteristics);
|
|
/* Port Power Control */
|
|
if (HCS_PPC(reg))
|
|
put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
|
|
| 0x01, &descriptor.hub.wHubCharacteristics);
|
|
|
|
/* Start the host controller. */
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
/*
|
|
* Philips, Intel, and maybe others need CMD_RUN before the
|
|
* root hub will detect new devices (why?); NEC doesn't
|
|
*/
|
|
cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
|
cmd |= CMD_RUN;
|
|
ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
|
|
|
|
if (!(tweaks & EHCI_TWEAK_NO_INIT_CF)) {
|
|
/* take control over the ports */
|
|
cmd = ehci_readl(&ctrl->hcor->or_configflag);
|
|
cmd |= FLAG_CF;
|
|
ehci_writel(&ctrl->hcor->or_configflag, cmd);
|
|
}
|
|
|
|
/* unblock posted write */
|
|
cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
|
|
mdelay(5);
|
|
reg = HC_VERSION(ehci_readl(&ctrl->hccr->cr_capbase));
|
|
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_USB
|
|
int usb_lowlevel_stop(int index)
|
|
{
|
|
ehci_shutdown(&ehcic[index]);
|
|
return ehci_hcd_stop(index);
|
|
}
|
|
|
|
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
|
|
{
|
|
struct ehci_ctrl *ctrl = &ehcic[index];
|
|
uint tweaks = 0;
|
|
int rc;
|
|
|
|
/**
|
|
* Set ops to default_ehci_ops, ehci_hcd_init should call
|
|
* ehci_set_controller_priv to change any of these function pointers.
|
|
*/
|
|
ctrl->ops = default_ehci_ops;
|
|
|
|
rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
|
|
if (rc)
|
|
return rc;
|
|
if (!ctrl->hccr || !ctrl->hcor)
|
|
return -1;
|
|
if (init == USB_INIT_DEVICE)
|
|
goto done;
|
|
|
|
/* EHCI spec section 4.1 */
|
|
if (ehci_reset(ctrl))
|
|
return -1;
|
|
|
|
#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
|
|
rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
|
|
if (rc)
|
|
return rc;
|
|
#endif
|
|
#ifdef CONFIG_USB_EHCI_FARADAY
|
|
tweaks |= EHCI_TWEAK_NO_INIT_CF;
|
|
#endif
|
|
rc = ehci_common_init(ctrl, tweaks);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ctrl->rootdev = 0;
|
|
done:
|
|
*controller = &ehcic[index];
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int _ehci_submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length)
|
|
{
|
|
|
|
if (usb_pipetype(pipe) != PIPE_BULK) {
|
|
debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe));
|
|
return -1;
|
|
}
|
|
return ehci_submit_async(dev, pipe, buffer, length, NULL);
|
|
}
|
|
|
|
static int _ehci_submit_control_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length,
|
|
struct devrequest *setup)
|
|
{
|
|
struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
|
|
|
|
if (usb_pipetype(pipe) != PIPE_CONTROL) {
|
|
debug("non-control pipe (type=%lu)", usb_pipetype(pipe));
|
|
return -1;
|
|
}
|
|
|
|
if (usb_pipedevice(pipe) == ctrl->rootdev) {
|
|
if (!ctrl->rootdev)
|
|
dev->speed = USB_SPEED_HIGH;
|
|
return ehci_submit_root(dev, pipe, buffer, length, setup);
|
|
}
|
|
return ehci_submit_async(dev, pipe, buffer, length, setup);
|
|
}
|
|
|
|
struct int_queue {
|
|
int elementsize;
|
|
unsigned long pipe;
|
|
struct QH *first;
|
|
struct QH *current;
|
|
struct QH *last;
|
|
struct qTD *tds;
|
|
};
|
|
|
|
#define NEXT_QH(qh) (struct QH *)((unsigned long)hc32_to_cpu((qh)->qh_link) & ~0x1f)
|
|
|
|
static int
|
|
enable_periodic(struct ehci_ctrl *ctrl)
|
|
{
|
|
uint32_t cmd;
|
|
struct ehci_hcor *hcor = ctrl->hcor;
|
|
int ret;
|
|
|
|
cmd = ehci_readl(&hcor->or_usbcmd);
|
|
cmd |= CMD_PSE;
|
|
ehci_writel(&hcor->or_usbcmd, cmd);
|
|
|
|
ret = handshake((uint32_t *)&hcor->or_usbsts,
|
|
STS_PSS, STS_PSS, 100 * 1000);
|
|
if (ret < 0) {
|
|
printf("EHCI failed: timeout when enabling periodic list\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
udelay(1000);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
disable_periodic(struct ehci_ctrl *ctrl)
|
|
{
|
|
uint32_t cmd;
|
|
struct ehci_hcor *hcor = ctrl->hcor;
|
|
int ret;
|
|
|
|
cmd = ehci_readl(&hcor->or_usbcmd);
|
|
cmd &= ~CMD_PSE;
|
|
ehci_writel(&hcor->or_usbcmd, cmd);
|
|
|
|
ret = handshake((uint32_t *)&hcor->or_usbsts,
|
|
STS_PSS, 0, 100 * 1000);
|
|
if (ret < 0) {
|
|
printf("EHCI failed: timeout when disabling periodic list\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct int_queue *_ehci_create_int_queue(struct usb_device *dev,
|
|
unsigned long pipe, int queuesize, int elementsize,
|
|
void *buffer, int interval)
|
|
{
|
|
struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
|
|
struct int_queue *result = NULL;
|
|
uint32_t i, toggle;
|
|
|
|
/*
|
|
* Interrupt transfers requiring several transactions are not supported
|
|
* because bInterval is ignored.
|
|
*
|
|
* Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2
|
|
* <= PKT_ALIGN if several qTDs are required, while the USB
|
|
* specification does not constrain this for interrupt transfers. That
|
|
* means that ehci_submit_async() would support interrupt transfers
|
|
* requiring several transactions only as long as the transfer size does
|
|
* not require more than a single qTD.
|
|
*/
|
|
if (elementsize > usb_maxpacket(dev, pipe)) {
|
|
printf("%s: xfers requiring several transactions are not supported.\n",
|
|
__func__);
|
|
return NULL;
|
|
}
|
|
|
|
debug("Enter create_int_queue\n");
|
|
if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
|
|
debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe));
|
|
return NULL;
|
|
}
|
|
|
|
/* limit to 4 full pages worth of data -
|
|
* we can safely fit them in a single TD,
|
|
* no matter the alignment
|
|
*/
|
|
if (elementsize >= 16384) {
|
|
debug("too large elements for interrupt transfers\n");
|
|
return NULL;
|
|
}
|
|
|
|
result = malloc(sizeof(*result));
|
|
if (!result) {
|
|
debug("ehci intr queue: out of memory\n");
|
|
goto fail1;
|
|
}
|
|
result->elementsize = elementsize;
|
|
result->pipe = pipe;
|
|
result->first = memalign(USB_DMA_MINALIGN,
|
|
sizeof(struct QH) * queuesize);
|
|
if (!result->first) {
|
|
debug("ehci intr queue: out of memory\n");
|
|
goto fail2;
|
|
}
|
|
result->current = result->first;
|
|
result->last = result->first + queuesize - 1;
|
|
result->tds = memalign(USB_DMA_MINALIGN,
|
|
sizeof(struct qTD) * queuesize);
|
|
if (!result->tds) {
|
|
debug("ehci intr queue: out of memory\n");
|
|
goto fail3;
|
|
}
|
|
memset(result->first, 0, sizeof(struct QH) * queuesize);
|
|
memset(result->tds, 0, sizeof(struct qTD) * queuesize);
|
|
|
|
toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
|
|
|
|
for (i = 0; i < queuesize; i++) {
|
|
struct QH *qh = result->first + i;
|
|
struct qTD *td = result->tds + i;
|
|
void **buf = &qh->buffer;
|
|
|
|
qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH);
|
|
if (i == queuesize - 1)
|
|
qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
|
|
|
|
qh->qh_overlay.qt_next = cpu_to_hc32((unsigned long)td);
|
|
qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
qh->qh_endpt1 =
|
|
cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */
|
|
(usb_maxpacket(dev, pipe) << 16) | /* MPS */
|
|
(1 << 14) |
|
|
QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
|
|
(usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */
|
|
(usb_pipedevice(pipe) << 0));
|
|
qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */
|
|
(1 << 0)); /* S-mask: microframe 0 */
|
|
if (dev->speed == USB_SPEED_LOW ||
|
|
dev->speed == USB_SPEED_FULL) {
|
|
/* C-mask: microframes 2-4 */
|
|
qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8));
|
|
}
|
|
ehci_update_endpt2_dev_n_port(dev, qh);
|
|
|
|
td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
|
|
debug("communication direction is '%s'\n",
|
|
usb_pipein(pipe) ? "in" : "out");
|
|
td->qt_token = cpu_to_hc32(
|
|
QT_TOKEN_DT(toggle) |
|
|
(elementsize << 16) |
|
|
((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */
|
|
0x80); /* active */
|
|
td->qt_buffer[0] =
|
|
cpu_to_hc32((unsigned long)buffer + i * elementsize);
|
|
td->qt_buffer[1] =
|
|
cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff);
|
|
td->qt_buffer[2] =
|
|
cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff);
|
|
td->qt_buffer[3] =
|
|
cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff);
|
|
td->qt_buffer[4] =
|
|
cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff);
|
|
|
|
*buf = buffer + i * elementsize;
|
|
toggle ^= 1;
|
|
}
|
|
|
|
flush_dcache_range((unsigned long)buffer,
|
|
ALIGN_END_ADDR(char, buffer,
|
|
queuesize * elementsize));
|
|
flush_dcache_range((unsigned long)result->first,
|
|
ALIGN_END_ADDR(struct QH, result->first,
|
|
queuesize));
|
|
flush_dcache_range((unsigned long)result->tds,
|
|
ALIGN_END_ADDR(struct qTD, result->tds,
|
|
queuesize));
|
|
|
|
if (ctrl->periodic_schedules > 0) {
|
|
if (disable_periodic(ctrl) < 0) {
|
|
debug("FATAL: periodic should never fail, but did");
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
/* hook up to periodic list */
|
|
struct QH *list = &ctrl->periodic_queue;
|
|
result->last->qh_link = list->qh_link;
|
|
list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH);
|
|
|
|
flush_dcache_range((unsigned long)result->last,
|
|
ALIGN_END_ADDR(struct QH, result->last, 1));
|
|
flush_dcache_range((unsigned long)list,
|
|
ALIGN_END_ADDR(struct QH, list, 1));
|
|
|
|
if (enable_periodic(ctrl) < 0) {
|
|
debug("FATAL: periodic should never fail, but did");
|
|
goto fail3;
|
|
}
|
|
ctrl->periodic_schedules++;
|
|
|
|
debug("Exit create_int_queue\n");
|
|
return result;
|
|
fail3:
|
|
if (result->tds)
|
|
free(result->tds);
|
|
fail2:
|
|
if (result->first)
|
|
free(result->first);
|
|
if (result)
|
|
free(result);
|
|
fail1:
|
|
return NULL;
|
|
}
|
|
|
|
static void *_ehci_poll_int_queue(struct usb_device *dev,
|
|
struct int_queue *queue)
|
|
{
|
|
struct QH *cur = queue->current;
|
|
struct qTD *cur_td;
|
|
uint32_t token, toggle;
|
|
unsigned long pipe = queue->pipe;
|
|
|
|
/* depleted queue */
|
|
if (cur == NULL) {
|
|
debug("Exit poll_int_queue with completed queue\n");
|
|
return NULL;
|
|
}
|
|
/* still active */
|
|
cur_td = &queue->tds[queue->current - queue->first];
|
|
invalidate_dcache_range((unsigned long)cur_td,
|
|
ALIGN_END_ADDR(struct qTD, cur_td, 1));
|
|
token = hc32_to_cpu(cur_td->qt_token);
|
|
if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) {
|
|
debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token);
|
|
return NULL;
|
|
}
|
|
|
|
toggle = QT_TOKEN_GET_DT(token);
|
|
usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle);
|
|
|
|
if (!(cur->qh_link & QH_LINK_TERMINATE))
|
|
queue->current++;
|
|
else
|
|
queue->current = NULL;
|
|
|
|
invalidate_dcache_range((unsigned long)cur->buffer,
|
|
ALIGN_END_ADDR(char, cur->buffer,
|
|
queue->elementsize));
|
|
|
|
debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n",
|
|
token, cur, queue->first);
|
|
return cur->buffer;
|
|
}
|
|
|
|
/* Do not free buffers associated with QHs, they're owned by someone else */
|
|
static int _ehci_destroy_int_queue(struct usb_device *dev,
|
|
struct int_queue *queue)
|
|
{
|
|
struct ehci_ctrl *ctrl = ehci_get_ctrl(dev);
|
|
int result = -1;
|
|
unsigned long timeout;
|
|
|
|
if (disable_periodic(ctrl) < 0) {
|
|
debug("FATAL: periodic should never fail, but did");
|
|
goto out;
|
|
}
|
|
ctrl->periodic_schedules--;
|
|
|
|
struct QH *cur = &ctrl->periodic_queue;
|
|
timeout = get_timer(0) + 500; /* abort after 500ms */
|
|
while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) {
|
|
debug("considering %p, with qh_link %x\n", cur, cur->qh_link);
|
|
if (NEXT_QH(cur) == queue->first) {
|
|
debug("found candidate. removing from chain\n");
|
|
cur->qh_link = queue->last->qh_link;
|
|
flush_dcache_range((unsigned long)cur,
|
|
ALIGN_END_ADDR(struct QH, cur, 1));
|
|
result = 0;
|
|
break;
|
|
}
|
|
cur = NEXT_QH(cur);
|
|
if (get_timer(0) > timeout) {
|
|
printf("Timeout destroying interrupt endpoint queue\n");
|
|
result = -1;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (ctrl->periodic_schedules > 0) {
|
|
result = enable_periodic(ctrl);
|
|
if (result < 0)
|
|
debug("FATAL: periodic should never fail, but did");
|
|
}
|
|
|
|
out:
|
|
free(queue->tds);
|
|
free(queue->first);
|
|
free(queue);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int _ehci_submit_int_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length, int interval)
|
|
{
|
|
void *backbuffer;
|
|
struct int_queue *queue;
|
|
unsigned long timeout;
|
|
int result = 0, ret;
|
|
|
|
debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
|
|
dev, pipe, buffer, length, interval);
|
|
|
|
queue = _ehci_create_int_queue(dev, pipe, 1, length, buffer, interval);
|
|
if (!queue)
|
|
return -1;
|
|
|
|
timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
|
|
while ((backbuffer = _ehci_poll_int_queue(dev, queue)) == NULL)
|
|
if (get_timer(0) > timeout) {
|
|
printf("Timeout poll on interrupt endpoint\n");
|
|
result = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
if (backbuffer != buffer) {
|
|
debug("got wrong buffer back (%p instead of %p)\n",
|
|
backbuffer, buffer);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = _ehci_destroy_int_queue(dev, queue);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* everything worked out fine */
|
|
return result;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_USB
|
|
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length)
|
|
{
|
|
return _ehci_submit_bulk_msg(dev, pipe, buffer, length);
|
|
}
|
|
|
|
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
|
|
int length, struct devrequest *setup)
|
|
{
|
|
return _ehci_submit_control_msg(dev, pipe, buffer, length, setup);
|
|
}
|
|
|
|
int submit_int_msg(struct usb_device *dev, unsigned long pipe,
|
|
void *buffer, int length, int interval)
|
|
{
|
|
return _ehci_submit_int_msg(dev, pipe, buffer, length, interval);
|
|
}
|
|
|
|
struct int_queue *create_int_queue(struct usb_device *dev,
|
|
unsigned long pipe, int queuesize, int elementsize,
|
|
void *buffer, int interval)
|
|
{
|
|
return _ehci_create_int_queue(dev, pipe, queuesize, elementsize,
|
|
buffer, interval);
|
|
}
|
|
|
|
void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
|
|
{
|
|
return _ehci_poll_int_queue(dev, queue);
|
|
}
|
|
|
|
int destroy_int_queue(struct usb_device *dev, struct int_queue *queue)
|
|
{
|
|
return _ehci_destroy_int_queue(dev, queue);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_USB
|
|
static int ehci_submit_control_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length,
|
|
struct devrequest *setup)
|
|
{
|
|
debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__,
|
|
dev->name, udev, udev->dev->name, udev->portnr);
|
|
|
|
return _ehci_submit_control_msg(udev, pipe, buffer, length, setup);
|
|
}
|
|
|
|
static int ehci_submit_bulk_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length)
|
|
{
|
|
debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
|
|
return _ehci_submit_bulk_msg(udev, pipe, buffer, length);
|
|
}
|
|
|
|
static int ehci_submit_int_msg(struct udevice *dev, struct usb_device *udev,
|
|
unsigned long pipe, void *buffer, int length,
|
|
int interval)
|
|
{
|
|
debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
|
|
return _ehci_submit_int_msg(udev, pipe, buffer, length, interval);
|
|
}
|
|
|
|
static struct int_queue *ehci_create_int_queue(struct udevice *dev,
|
|
struct usb_device *udev, unsigned long pipe, int queuesize,
|
|
int elementsize, void *buffer, int interval)
|
|
{
|
|
debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
|
|
return _ehci_create_int_queue(udev, pipe, queuesize, elementsize,
|
|
buffer, interval);
|
|
}
|
|
|
|
static void *ehci_poll_int_queue(struct udevice *dev, struct usb_device *udev,
|
|
struct int_queue *queue)
|
|
{
|
|
debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
|
|
return _ehci_poll_int_queue(udev, queue);
|
|
}
|
|
|
|
static int ehci_destroy_int_queue(struct udevice *dev, struct usb_device *udev,
|
|
struct int_queue *queue)
|
|
{
|
|
debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
|
|
return _ehci_destroy_int_queue(udev, queue);
|
|
}
|
|
|
|
static int ehci_get_max_xfer_size(struct udevice *dev, size_t *size)
|
|
{
|
|
/*
|
|
* EHCD can handle any transfer length as long as there is enough
|
|
* free heap space left, hence set the theoretical max number here.
|
|
*/
|
|
*size = SIZE_MAX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_register(struct udevice *dev, struct ehci_hccr *hccr,
|
|
struct ehci_hcor *hcor, const struct ehci_ops *ops,
|
|
uint tweaks, enum usb_init_type init)
|
|
{
|
|
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
|
|
struct ehci_ctrl *ctrl = dev_get_priv(dev);
|
|
int ret = -1;
|
|
|
|
debug("%s: dev='%s', ctrl=%p, hccr=%p, hcor=%p, init=%d\n", __func__,
|
|
dev->name, ctrl, hccr, hcor, init);
|
|
|
|
if (!ctrl || !hccr || !hcor)
|
|
goto err;
|
|
|
|
priv->desc_before_addr = true;
|
|
|
|
ehci_setup_ops(ctrl, ops);
|
|
ctrl->hccr = hccr;
|
|
ctrl->hcor = hcor;
|
|
ctrl->priv = ctrl;
|
|
|
|
ctrl->init = init;
|
|
if (ctrl->init == USB_INIT_DEVICE)
|
|
goto done;
|
|
|
|
ret = ehci_reset(ctrl);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (ctrl->ops.init_after_reset) {
|
|
ret = ctrl->ops.init_after_reset(ctrl);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = ehci_common_init(ctrl, tweaks);
|
|
if (ret)
|
|
goto err;
|
|
done:
|
|
return 0;
|
|
err:
|
|
free(ctrl);
|
|
debug("%s: failed, ret=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
int ehci_deregister(struct udevice *dev)
|
|
{
|
|
struct ehci_ctrl *ctrl = dev_get_priv(dev);
|
|
|
|
if (ctrl->init == USB_INIT_DEVICE)
|
|
return 0;
|
|
|
|
ehci_shutdown(ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct dm_usb_ops ehci_usb_ops = {
|
|
.control = ehci_submit_control_msg,
|
|
.bulk = ehci_submit_bulk_msg,
|
|
.interrupt = ehci_submit_int_msg,
|
|
.create_int_queue = ehci_create_int_queue,
|
|
.poll_int_queue = ehci_poll_int_queue,
|
|
.destroy_int_queue = ehci_destroy_int_queue,
|
|
.get_max_xfer_size = ehci_get_max_xfer_size,
|
|
};
|
|
|
|
#endif
|